• 제목/요약/키워드: BM25

검색결과 311건 처리시간 0.028초

2.3 GHz 대역에서 단일 Half-LO 주파수를 이용한 Double-Conversion Down Mixer 설계 (Design of Double-Conversion Down Mixer Using Single Half-LO Frequency at 2.3 GHz)

  • 김민석;문주영;윤상원
    • 한국전자파학회논문지
    • /
    • 제17권8호
    • /
    • pp.719-724
    • /
    • 2006
  • 본 논문에서는 Half-LO 주파수를 이용하는 새로운 방식의 double-conversion down mixer를 2.3 GHz 대역에서 설계하였다. 제안된 mixer에서는 Half-LO 주파수를 2개의 HEMT에 인가하여 두 HEMT에서의 변환 방식을 gate type과 resistive type으로 다르게 함으로서 IF 주파수를 얻게 된다. 기존의 sub-harmonic mixers와 같이 Half-LO 주파수를 사용하지만 제안된 mixer는 Half-LO의 second harmonic 성분을 이용하지 않고 Half-LO의 기본 주파수를 이용하여 주파수 변환을 하고 두 번째 HEMT에서 Resistive mixer type으로 IF 신호를 얻기 때문에 기존의 능동 mixer보다 향상된 선형성을 얻을 수 있다. 2.3 GHz 대역에서 설계 제작된 mixer는 Half-LO 전력 10 dBm을 이용하여 5dB의 변환 손실과 16.25dBm의 IIP3 특성을 얻을 수 있었다.

Clamping Op-Amp를 이용한 광대역 로그 비디오 증폭기의 선형성 개선에 관한 연구 (Study on the Development of Linearity of Broad-Band SDLVA Using Clamping Op-Amp)

  • 박종설;김종건;김점식
    • 한국전자파학회논문지
    • /
    • 제22권6호
    • /
    • pp.641-647
    • /
    • 2011
  • 본 논문은 0.5~2.0 GHz에서 -70~0 dBm의 동적 범위를 갖는 로그 비디오 증폭기(Successive Detecting Log Video Amplifier, 이하 SDLVA)를 설계 및 제작하였다. 제작된 SDLVA는 5단의 증폭기를 이용한 고주파 출력부, 2단의 로그검파기 그리고 선형성 개선을 위하여 클램핑 연산증폭기를 이용한 가산 회로로 구현하였다. 제작된 SDLVA의 측정 결과는 73 dB 이상의 소신호 이득과 10.1~12.2 dBm의 고주파 포화 출력 특성을 갖는다. 그리고 -70~0 dBm 입력 시 25 mV/ dB${\pm}$1.0 mV의 기울기를 갖고 ${\pm}$1.5 dB 이하의 선형 특성을 갖는 비디오 신호를 출력한다.

직접 변환 방식을 이용한 디지털 초협대역 무전기 설계 및 구현 (A Design and Implementation of Digital Ultra-Narrowband Walky-Talky Using Direct Conversion Method)

  • 정영준;강민수;유성진;정태진;오승엽
    • 한국전자파학회논문지
    • /
    • 제16권6호
    • /
    • pp.603-614
    • /
    • 2005
  • 본 논문에서는 CQPSK(Compatible QPSK) 변조 방식을 이용하여 APCO P25 규격을 만족하는 직접 변환 방식 디지털 초협대역 무전기를 구현하였다. 초협대역화에 따른 DC-offset 및 AC-coupling 영향, CQPSK 변조 방식에 대한 전력 증폭기의 비선형 특성을 최소화하기 위한 무전기 RF 트랜시버 설계 및 제작 방안을 제시하였다. 직접 변환 방식 RE 트랜시버 및 DSP 모듈과의 연동 시험 결과 송신기의 경우 36.8 dBm의 PEP에서 FCC 방사 마스크 규격을 만족하였다. PWM 제어 신호에 의한 수신기 AGC 동작 범위는 40 dB 범위에서 선형적으로 동작 하였고, 수신 감도 레벨(-116 dBm)에서도 양호한 음성 통화가 가능하였다. 또한 입력 SNR에 따른 BER 성능 및 주파수 오프셋 변화에 대한 BER 성능 측정 결과 무전기 성능 요구 규격을 만족함을 확인하였다.

IMT-2000단말기용 RF 수신모듈 설계 및 제작에 관한 연구 (A Study on the Design and Fabrication of RF Receiver Module for IMT-2000 Handset)

  • 이규복;송희석;박종철
    • 마이크로전자및패키징학회지
    • /
    • 제7권3호
    • /
    • pp.19-25
    • /
    • 2000
  • 본 논문에서는 5 MHz의 채널 대역폭을 갖는 IMT-2000단말기용 RF 수신모듈을 설계하여 제작하였다. 제작된 RF수신모듈은 저잡음증폭기, RF SAW필터, 하향 변환기, IF SAW필터, AGC, PLL 주파수합성기로 구성되어졌다. 저잡음증폭기의 잡음지수와 IIP3는 2.14 GHz에서 0.8 dB와 3 dBm이고, 하향 변환기의 변환이득은 10 dB, AGC의 활성영역은 80 dB이었고, PLL의 위상잡음은 100 kHz에서 -100 dBc이였다. 수신모듈의 수신감도는 -48 dBm으로 제작되었다.

  • PDF

Characterization of Low-Temperature Enzymatic Reactions through Heterologous Expression and Functional Analysis of Two Beta-Glucosidases from the Termite Symbiotic Bacterium Elizabethkingia miricola Strain BM10

  • Dongmin LEE;Tae-Jong KIM
    • Journal of the Korean Wood Science and Technology
    • /
    • 제51권4호
    • /
    • pp.270-282
    • /
    • 2023
  • Lower termites need symbiotic microbes for cellulose digestion. Elizabethkingia miricola strain BM10 has been proposed as a symbiotic microbe that assists in low-temperature digestion and metabolism of Reticulitermes speratus KMT1, a termite on Bukhan Mountain, Seoul, Korea. In E. miricola strain BM10, β-glucosidase genes expressed at 10℃ were identified, and the psychrophilic enzymatic characteristic was confirmed by heterogeneously expressed proteins. Crude β-glucosidase in the culture broth of E. miricola strain BM10 showed specific enzymatic properties, and its substrate affinity was 4.69 times higher than that of Cellic CTec2. Among the genes proposed as β-glucosidase, two genes, bglB_1 and bglA_2, whose gene expression was more than doubled at 10℃ than at 30℃, were identified. They were heterogeneously expressed in Escherichia coli and identified as psychrophilic enzymes with an optimal reaction temperature of about 20℃-25℃. In this study, E. miricola strain BM10, a symbiotic bacterium of lower termites, produced psychrophilic β-glucosidases that contribute to the spread of the low-temperature habitat of a lower termite, R. speratus KMT1.

A 77GHz MMIC Transceiver Module for Automotive Forward-Looking Radar Sensor

  • 강동민;홍주영;심재엽;윤형섭;이경호
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 2006년도 하계종합학술대회
    • /
    • pp.609-610
    • /
    • 2006
  • A 77GHz MMIC transceiver module consisting of a power amplifier, a low noise amplifier, a drive amplifier, a frequency doubler and a down-mixer has been developed for automotive forward-looking radar sensor. The MMIC chip set was fabricated using $0.15{\mu}m$ gate-length InGaAs/InAlAs/GaAs mHEMT process based on 4-inch substrate. The power amplifier demonstrated a measured small signal gain of over 20dB from $76{\sim}77GHz$ with 15.5dBm output power. The chip size is $2mm{\times}2mm$. The low noise amplifier achieved a gain of 20dB in a band between $76{\sim}77\;GHz$ with an output power of 10dBm. The chip size is $2.2mm{\times}2mm$. The driver amplifier exhibited a gain of 23dB over a $76{\sim}77\;GHz$ band with an output power of 13dBm. The chip size is $2.1mm{\times}2mm$. The frequency doubler achieved an output power of -16dBm at 76.5GHz with a conversion gain of -16dB for an input power of 10dBm and a 38.25GHz input frequency. The chip size is $1.2mm{\times}1.2mm$. The down-mixer demonstrated a measured conversion gain of over -9dB. The chip size is $1.3mm{\times}1.9mm$. The transceiver module achieved an output power of 10dBm in a band between $76{\sim}77GHz$ with a receiver P1dB of -28dBm. The module size is $8{\times}9.5{\times}2.4mm^3$. This MMIC transceiver module is suitable for the 77GHz automotive radar systems and related applications in W-band.

  • PDF

통신시스템간 동일채널에서 단말간 이격거리에 따른 간섭확률 분석 (Analysis of Interference Probability according to Distance between Communication Systems in Co-channel)

  • 조주필;이일규
    • 한국정보통신학회논문지
    • /
    • 제15권11호
    • /
    • pp.2307-2312
    • /
    • 2011
  • 본 논문에서는 이기종 시스템이 동일 주파수 대역을 공유하는 경우의 상호 공존성 분석을 위한 파라미터로 단말간 이격거리에 따른 간섭 확률 분석을 수행하였다. 각각의 시스템들간의 간섭 영향을 고려하기 위해, 간섭시스템이 WiBro, 희생시스템이 WLAN인 경우와 WiBro가 간섭을 받는 환경에서의 간섭확률을 분석하였다. 간섭 송신기가 WiBro인 경우와 WLAN인 경우 그의 출력 전력 레벨을 각각 25dBm과 23dBm 으로 설정하여 이격거리에 따른 간섭확률을 분석하였다. 이를 통해 향후 실제 필드에서 채널 공유를 위한 기준 데이터에 사용할 수 있을 것이다.

푸쉬-푸쉬 방식을 이용한 CMOS 기반 D-밴드 전압 제어 발진기 (CMOS Based D-Band Push-Push Voltage Controlled Oscillator)

  • 정승윤;윤종원;김남형;이재성
    • 한국전자파학회논문지
    • /
    • 제25권12호
    • /
    • pp.1236-1242
    • /
    • 2014
  • 본 연구에서는 65-nm CMOS 공정을 이용하여 D-밴드 주파수 대역(110~170 GHz)의 전압 제어 발진기(voltage controlled oscillator)를 제작 및 측정을 수행하였다. 발진기의 구조는 푸쉬-푸쉬(push-push) 방식에 기반을 두고 있다. 제작된 전압 제어 발진기의 동작 주파수의 범위는 152.7~165.8 GHz로 측정되었으며 이때의 출력 전력은 -17.3 dBm에서 -8.7 dBm까지의 값을 보였다. 이 회로의 위상잡음(phase noise)은 10 MHz 오프셋에서 -90.9 dBc/Hz로 측정되었고, 측정용 패드를 포함한 제작된 칩의 크기는 $470{\mu}m{\times}360{\mu}m$이다.

A RF Frong-End CMOS Transceiver for 2㎓ Dual-Band Applications

  • Youn, Yong-Sik;Kim, Nam-Soo;Chang, Jae-Hong;Lee, Young-Jae;Yu, Hyun-Kyu
    • JSTS:Journal of Semiconductor Technology and Science
    • /
    • 제2권2호
    • /
    • pp.147-155
    • /
    • 2002
  • This paper describes RF front-end transceiver chipset for the dual-mode operation of PCS-Korea and IMT-2000. The transceiver chipset has been implemented in a $0.25\mutextrm{m}$ single-poly five-metal CMOS technology. The receiver IC consists of a LNA and a down-mixer, and the transmitter IC integrates an up-mixer. Measurements show that the transceiver chipset covers the wide RF range from 1.8GHz for PCS-Korea to 2.1GHz for IMT-2000. The LNA has 2.8~3.1dB NF, 14~13dB gain and 5~4dBm IIP3. The down mixer has 15.5~16.0dB NF, 15~13dB power conversion gain and 2~0dBm IIP3. The up mixer has 0~2dB power conversion gain and 6~3dBm OIP3. With a single 3.0V power supply, the LNA, down-mixer, and up-mixer consume 6mA, 30mA, and 25mA, respectively.

A Fully Integrated 5-GHz CMOS Power Amplifier for IEEE 802.11a WLAN Applications

  • Baek, Sang-Hyun;Park, Chang-Kun;Hong, Song-Cheol
    • JSTS:Journal of Semiconductor Technology and Science
    • /
    • 제7권2호
    • /
    • pp.98-101
    • /
    • 2007
  • A fully integrated 5-GHz CMOS power amplifier for IEEE 802.11a WLAN applications is implemented using $0.18-{\mu}m$ CMOS technology. An on-chip transmission-line transformer is used for output matching network and voltage combining. Input balun, inter-stage matching components, output transmission line transformer and RF chokes are fully integrated in the designed amplifier so that no external components are required. The power amplifier occupies a total area of $1.7mm{\times}1.2mm$. At a 3.3-V supply voltage, the amplifier exhibits a 22.6-dBm output 1-dB compression point, 23.8-dBm saturated output power, 25-dB power gain. The measured power added efficiency (PAE) is 20.1 % at max. peak, 18.8% at P1dB. When 54 Mbps/64 QAM OFDM signal is applied, the PA delivers 12dBm of average power at the EVM of -25dB.