• 펄프종이기술
• /
• 제38권5호
• /
• pp.9-15
• /
• 2006

Wet compaction test (WCT) is a fiber evaluation method where wet fibers are compressed at one side of a cylinder and water drains out from the other side. The consistency of the fiber furnishes and their pressures are recorded during the test. In the previous study we found that WCT results always gave better coefficients of determination in fiber furnish drainage, and paper properties (density, tensile, tear, and burst strength) than those of WRV (water retention value). Fiber freeness and fiber length correlated well with drainage and tear strength of the furnishes, respectively; however, their correlations were very much improved by combining the WCT results. In this study, we used the WCT test for fractionated fiber furnishes to see whether improvement of the WCT is possible. We found that strength properties such as breaking length and burst index were correlated better with the fractionated long fiber furnishes. Drainage was greatly affected by the presence of short fiber furnishes. We used bleached chemical pulps (SwBKP, HwBKP), recycled pulp (OCC), and mechanical pulp (BCTMP) as fiber furnishes in this study. Fiber fractionation can be performed on-line in these days by using multifractor and WCT can be used as an on-line test in papermachine in the future.

• 펄프종이기술
• /
• 제46권4호
• /
• pp.21-27
• /
• 2014

As a part of the study on manufacture of low density paper by organic bulky agent treatment, the effects of cationic fatty acid bulky agent on physical and optical properties of handsheets were elucidated. The research on change of physical and optical properties of paper samples according to bulky agent concentration, pulp type, and pulp combination were carried out. The results demonstrated that an increase of the concentration of cationic fatty acid bulky agent was proportional to an increase of the bulky properties of paper samples while tensile strength decreased. Also, the more the treated concentration of cationic fatty acid bulky agent increased, the more the ISO brightness of paper samples decreased while the opacity increased. The effectiveness of bulky agent with softwood bleached kraft pulp (SwBKP) was higher than that with hardwood bleached kraft pulp (HwBKP). In addition, the effectiveness with mixed pulps was higher than that with single pulp.

• 펄프종이기술
• /
• 제38권4호
• /
• pp.17-23
• /
• 2006

Paper has fibers and fines network structure and it is strongly affected by interface bond-ing between fibers. Paper structural properties can be determined depending on the inter-fiber bonding. Fines play an important role in Campbell and consolidation effect through wet pressing and drying operations. The fines are essential for the formation of bonds between fibers and for the improvement of strength properties of papers. Since the fines are components of the pulp, there are always two factors to be considered: the quality and quantity of the fines. The quality of fines might be a potential variable to give a more accurate picture of the papermaking potential of the pulp. The object of this study is to investigate the effect of different types of pulp fines on the properties of paper and to access the potential of fines for controlling the bulk of paper. Refined Sw-BKP, Hw-BKP and BCTMP fines were used to investigate the fines effect. Wet-web strength, breaking length, scattering coefficient, and hydrodynamic specific volume, and drying shrinkage were measured. According to the results, chemical and morphological compositions of fines do not strongly affect to wet-web forming by their similar Campbell effect, but strongly affect to drying operation which forms hydrogen bonding among fiber-fines-fiber matrixes. Paper bulk should be controlled by the extent of hydrogen bonding between fibers during drying operation.

• 펄프종이기술
• /
• 제32권2호
• /
• pp.1-7
• /
• 2000

In the previous experiment, it was found that OCC pre-treatment with Hobart mixer at 20-25％ consistency for 3 hrs or more followed by the application of the equal refining time, caused the increase of tensile strength, burst strength, compressive strength and tear resistance, compared to the no pre-treated. Four completely different fibers, which were Hw-BKP, Sw-BKP, White ledger, and OCC were selected for this experiment to investigate the effect of mechanical pre-treatment process on different fibers. From the experiment, it was found that the mechanical pre-treatment did not decrease fiber length at all, but decreased freeness, com-pared to the no pre-treated, when the same refining time was applied. WRVs of the pre-treated fibers were higher than the no pre-treated at the same freeness level. It was speculated that the mechanical pre-treatment induced only hydrophilic nature of fibers without damaging fiber length by delaminating fiber walls. The fiber surface area and the physical strength differences of handsheets will be discussed in the next publication.

• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 2000년도 춘계학술발표논문집
• /
• pp.69-69
• /
• 2000

In the previous experiment, it was found that OCC pre-treatment with Hobat mixer at 20-25% consistency for 3 hrs or more followed by the application of the equal refining time, caused the increase of tensile strength, burst strength, compressive strength and tear resistance, compared to the no pre-treated. Four completely different fibers, which were Hw-BKP, Sw-BKP, White ledger, and OCC were selected for this experiment to investigate the effect of mechanical pre-treatment process on different fibers. From the experiment, it was found that the mechanical pre-treatment did not decrease fiber length at all, but decreased freeness, compared to the no pre-treated, when the same refining time was applied WRVs of the pre-treated fibers were higher than the no pre-treated at the same freeness level. It was speculated that the mechanical pre-treatment induced only hydrophilic nature of fibers without damaging fiber length by delaminating fiber walls. The fiber surface area and the physical strength differences of handsheets will be discussed in the next publication.

• 펄프종이기술
• /
• 제47권5호
• /
• pp.5-14
• /
• 2015

Recently, the use of wood resources has been limited due to global environmental change, like global warming and desertification. It is very critical in Korea's paper industries because lots of virgin pulp are dependant on direct import from abroad for printing grade of paper. In this work, the alternatively best available technique for reducing the import amounts of BKP (bleached Kraft pulp) was considered by mixing DIP (deinked pulp) and TMP (thermomechanical pulp) for the manufacture of high quality paper. Generally known, the sheet prepared from fibrous raw materials of DIP and TMP has lower strength and optical properties than that prepared from BKP. This study was aimed to improve the sheet quality by using DIP and TMP. 4 kinds of polyelectrolytes were approached to find out the best effects on physical strength and optical brightness improvements, and high retention behaviors with GCC (ground calcium carbonate). In conclusion, amphoteric PAM with 1,000,000 molecular weight (g/mol) and 0.5 charge density (meq/g) was best for the improvement of strength properties with the mixture of DIP and TMP. GCC retention rate was also the highest with cationic-PAM of above 2,000,000 molecular weight (g/mol) and about 2.0-3.0 charge density (meq/g) of strengthening agent.

• 펄프종이기술
• /
• 제44권1호
• /
• pp.52-57
• /
• 2012

In this study, we investigated the possible use of a new inorganic material as alternative filler in the paper industry. The inorganic material is a mineral composed of calcium sulfate, that is generated when manufacturing phosphate fertilizer. The inorganic material was dehydrated by the thermal treatment to $200^{\circ}C$, $500^{\circ}C$, $700^{\circ}C$, and $900^{\circ}C$ to prepare white filler powders. Their basic properties, including color, particle shape, elements, and average particle size were identified. To determine the effect of new inorganic filler on paper's physical properties and strength, handsheets were prepared from HwBKP, SwBKP, and thermal treated inorganic fillers. Handsheets' ISO brightness, opacity, bulk, breaking length, and stiffness were measured. Results confirmed that thermal treated inorganic filler could be beneficial to the bulk and opacity of paper while maintaining higher level of breaking length and stiffness that is achieved using talc.

• 펄프종이기술
• /
• 제45권6호
• /
• pp.30-35
• /
• 2013

To conserve wood resources for papermaking, chemical compositions of the hemp (Cannabis sativa L.) bast fiber cultivated in Korea such as holocellulose, ${\alpha}$-cellulose, lignin, alcohol-benzene extractives, hot and cold water extractives, and ash contents were investigated to manufacture the specialty packaging paper effectively. Significantly very low klason lignin content of 3.3% was accomplished by removing of the outer shell of bark. Laboratory soda pulping method which is very useful for the nonwood fiber was adapted, and it was found that there was no significant difference in both kappa number and H-factor between 25% and 30% NaOH charge. Hemp pulp cooked with the laboratory digester in 25% NaOH at $170^{\circ}C$ were mixed together with the wood pulp(NBKP:LBKP=1:1) in order to find the optimum mixture ratio which exhibited acceptable paper strength properties such as tensile index, burst index, and tear strength. When 10% of hemp soda pulps was mixed with 90% of wood pulps comprised of SwBKP and HwBKP (1:1), all physical strength increased significantly. The physical strength decreased as the amount of hemp pulp increased because the cell wall of bast fiber is very thick which causes low conformability and low fiber-fiber bonding. These results showed that paper made of hemp-wood pulp can be used for the specialty packaging paper which requires both the characteristic surface properties and the high physical strength of hemp fiber.

• 펄프종이기술
• /
• 제31권4호
• /
• pp.8-15
• /
• 1999

The effects of Condebelt press drying on the densification of recycled sheets made from KOCC , AOCC UKP and BKP were examined using CLSM (Confocal Laser Scanning Microscope) and thermal image analysis techniques. It was shown that significant improvement in sheet density, compression strength, tensile strength, surface smoothness was obtained by Condebelt drying. Densification effect by press drying was most prominent for recycled KOCC sheets. And this beneficial effect of Condebelt drying of increasing sheet density and strength was shown to provide opportunities of reducing the utilization ratio of AOCC for cost saving.

• Journal of the Korean Wood Science and Technology
• /
• 제40권2호
• /
• pp.71-77
• /
• 2012

Cellulose nanowhisker (CNW) isolated from hardwood bleached kraft pulp (HW-BKP) using sulfuric acid hydrolysis was suspended in polyvinyl alcohol (PVA) and electrospun into composites nanofibers. Transmission electron microscopy (TEM) revealed the CNW to be rod-like, approximately of $16.1{\pm}4.6$ nm wide and $194{\pm}61$ nm long, providing an aspect ratio of about 12, with a particle size distribution range of $662.2{\pm}301.2$ nm. Uniform and high quality CNW/PVA composite nanofibers were successfully manufactured by the electrospinning method. As the CNW loading increases, the viscosity of CNW/PVA solutions shows a minimum at 1% CNW level which subsequently results in the smallest diameter (193 nm) of electrospun nanofibers. The average diameter of the nanofibers increased up to 284 nm with increasing CNW loading. These results suggest that the electrospinning method provides a great potential of manufacturing consistent and reliable nanofibers from CNW/PVA solution for the formation of scaffolds with potentials in future application.