• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2006.05a
• /
• pp.209-210
• /
• 2006

We have successfully termed brown colored patterns inside of a transparent borosilicate glass generally known as BK7, laying the focus of near infrared Ti: sapphire femtosecond laser beam in the bulk BK7 glass. It is important to keep the laser power well below the damage threshold of BK7 in forming the color center. Thanks to the low laser power, there was no laser induced mechanical damage such as cracks or threads in the color formed area. From the absorbance spectrum and its gaussian fitting, we found the band gap of BK7, 4.21eV, and three absorption edges.

• Laser Solutions
• /
• v.15 no.3
• /
• pp.16-19
• /
• 2012

We have successfully formed brown colored patterns inside of a transparent borosilicate glass generally known as BK7, laying the focus of near infrared Ti: sapphire femtosecond laser beam in the bulk BK7 glass. It is important to keep the laser power well below the damage threshold of BK7 in forming the color center. According to the low laser power, there was no laser induced mechanical damage such as cracks or threads in the color formed area. From the absorbance spectrum and its gaussian fitting, we found the band gap of BK7, 4.21eV, and three absorption edges.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.21 no.1
• /
• pp.85-89
• /
• 2012

Conventional grinding of BK7 glass will normally result in brittle fracture at the surface, generating severe sub-surface damage and poor surface finish. The precision grinding of BK7 glass in parallel grinding modes has been investigated. Grinding process, maximum chip thickness, ductile/brittle regime, surface roughness and sub-surface damage have been addressed. Special attention has been given to the condition for generating a ductile mode response on the ground surface. Experiments reveal that the level of surface roughness and depth of sub-surface damage vary differently for different condition. This study gives an indication of the strategy to follow to achieve high quality ground surfaces on brittle materials.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.35D no.1
• /
• pp.84-93
• /
• 1998

Planar graded index optical waveguides have been formed by Ag$^{+}$ ion exchange in the BK7 optical glass. The experimental results of diffusion and modal characteristics of Ag$^{+}$-Na$^{+}$ exchanged BK7 glass waveguides are presented. Measurements of the mode indices have been measured. We found the relations between the process and device parameters such as the diffusion depth and the square root of the diffusion time, diffusion coefficient and diffusion temperature, and diffusion ion concentration and surface index change. A theoretical gaussian function refractive index profile matched best with the measured data for all the guided modes. The empirical relations between the process and the device parameters are derived and subsequently used to formulate a systematic procedure for fabricating singlemode and multimode waveguides.uides.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.20 no.4
• /
• pp.382-385
• /
• 2011

There is an immense need to obtain nanometric surface finish on optical glass owing to the advantage of improved performance of the components. But owing to brittleness and hardness, optical glass is one of the materials that is difficult to ultra-precision turning. According to the hypothesis of ductile mode machining, regardless of their hardness and brittleness, will undergo a transition from brittle to ductile machining region below a critical undeformed chip thickness. Below this threshold, it is suggested that the energy required for plastic formation. Thus, plastic deformation is the predominant mechanism of material removal in machining these materials in this mode. An experimental study is conducted diamond cutting for machining BK7 glass. The investigation presents the feasibility of achieving nanometric surface and the understanding the mechanism of cutting glass, proving the cutting edge radius effect.

• Laser Solutions
• /
• v.17 no.2
• /
• pp.19-25
• /
• 2014

Optical embedded diffraction gratings with the bulk modification in BK-7 glass plates excited by tightly focused high-intensity femtosecond (130fs) Ti: sapphire laser (peak wavelength = 790nm) were demonstrated. The structural modifications with diameters ranging from 400nm to $4{\mu}m$ were photo-induced after plasma formation occurred upon irradiation with peak intensities of more than $1{\times}1013W/cm^2$. The graded refractive index profile was fabricated to be a symmetric around from the center of the point at which low-density plasma occurred. The maximum refractive index change was estimated to be $1.5{\times}10^{-2}$. The two optical embedded gratings in BK-7 glass plate were demonstrated with refractive index modification induced by the scanning of low-density plasma formation.

• Current Optics and Photonics
• /
• v.4 no.1
• /
• pp.44-49
• /
• 2020

In this paper, a new method is presented to measure the refractive index of single plain glass or multilayered materials, based on a laser frequency-shifted confocal feedback microscope. Combining the laser frequency-shifted feedback technique and the confocal effect, the method can attain high axial-positioning accuracy, stability and sensitivity. Measurements of different samples are given, including N-BK7 glass, Silica plain glass, and a microfluidic chip with four layers. The results for N-BK7 glass and Silica plain glass show that the measurement uncertainty in the refractive index is better than 0.001. Meanwhile, the feasibility of this method for multilayered materials is tested. Compared to conventional methods, this system is more compact and has less difficulty in sample processing, and thus is promising for applications in the area of refractive-index measurement.

• Korean Journal of Optics and Photonics
• /
• v.12 no.4
• /
• pp.320-326
• /
• 2001

In this paper, we have fabricated asymmetric Y-branch optical power splitters with various optical power splitting ratios by changing the width of one of the output waveguides using $Ag^+-Na^+$ ion change method in BK7 glass. The transmission characteristics of asymmetric Y-branch optical power splitters with different output waveguide width have been investigated using the finitedifference beam propagation method (FD-BPM). We have found the index of the channel waveguide formed by Ag+-Na+ ion change method in BK7 glass and have fabricated channel waveguides to examine the transmission characteristics of channel waveguide. And we have fabricated asymmetric Y-branch optical power splitters with output waveguide width from TEX>$4{\mu}m$ to $6{\mu}m$. /TEX>.

• Korean Journal of Optics and Photonics
• /
• v.11 no.6
• /
• pp.418-422
• /
• 2000

In this paper, we have modeled and fabricated a mutimode interference (MMI) $1\times4$ optical power splitter using finite-difference beam propagation method and $Ag^+-Na^+$ ion-exchanged method in BK7 glass. The power splitting ratio of the fabricated MMI $1\times4$ optical power splitter shows 0.46 dB..46 dB.

• Journal of Multimedia Information System
• /
• v.7 no.4
• /
• pp.277-280
• /
• 2020

Extended reality-assisted training offers repeatable learning opportunities at a low cost. This paper proposes a smart glass application for training core nursing skills to nursing students, who often need to memorize and practice training sequences. The proposed smart glass application interactively presents a series of instructions to help students remember and perform two core nursing skills in the correct order. We conducted a usability test on 30 undergraduate nursing students in their third year using the smart glass application. Our initial findings show that many students have positively evaluated the possibility of using smart glasses for training, but have also encountered several challenges with the smart glass application's user interface, which takes time to adapt.