• 한국산학기술학회논문지
• /
• 제17권4호
• /
• pp.129-137
• /
• 2016

국내외에서 건축시설 중심의 BIM 라이브러리를 개발하여 보급하고 있으나, 개별 라이브러리 형상에 대한 물리적, 논리적 품질검토 방법을 정의하고 있지 않아 2D로부터 변환된 3D 라이브러리 모델의 신뢰성을 확보하는데 어려움이 있다. BIM 라이브러리는 자재 및 부재 제작업체들이 참여하여 컨텐츠를 구성하므로 개별 라이브러리의 제작 후 납품시 별도의 품질검토를 통해 인증을 받는 절차가 무엇보다 중요하다. 또한 그 활용에 범용성을 가져야 하므로 일관된 검토기준에 따라 객체의 품질을 확보하는 것이 필요하다. 따라서 본 연구에서는 국토교통부 표준도를 기반으로 작성된 토목분야 BIM 라이브러리를 토대로 기존 2D와 비교하여 물리적 및 데이터 관점에서 정확한 라이브러리 객체가 작성되었는지를 확인하기 위한 품질 검토 방법을 구성한다. 본 연구는 건축 및 토목분야의 자재 및 부재 제작업체들이 BIM 라이브러리 객체 납품 시 품질 검토 방법으로 널리 활용될 수 있을 것이다. 또한 As-Built BIM 모델의 품질검토를 위한 룰-셋(Rule-Sets) 정보로 활용되어 파라미터 기반의 자동화된 품질검증 시스템 구축에 활용될 수 있을 것이다.

• 한국BIM학회 논문집
• /
• 제4권2호
• /
• pp.10-16
• /
• 2014

Interoperability in the BIM construction information is the information management technology, which allows user to control and effectively use construction's lots of information that occur and disappear through construction life cycle. And it is information interchange through accurate and rapid decision-making to get the participants' wanted value. In this study, we will present plan to improve productivity and quality through effective BIM operation. And we will present improvement plan after deduce existing process's problem.

• 한국식생활문화학회지
• /
• 제10권3호
• /
• pp.167-174
• /
• 1995

A hazard analysis which included watching operations, measuring temperatures of foods throughout preparation and display, and sampling and testing for microorganisms of total plate counts and coliform bacteria was conducted in various phases of product flow of Naeng-myeun (Cold noodles) and Pi-bim bab (mixed rice) prepared at Korean restaurants. Large numbers of total plate counts were counted from the cooked foods after handling and holding. Ingestion of these foods must be considered high risk. Critical control points identified were, pre-preparation, food handling after cooking, and holding on display in product flow of Nang-Meon and pre-preparation, preparation, and holding on display in product flow of Pi-bim bab. It need for effective quality control of Nang-Meon and Pi-bim bab that training program consist of surveillance, education of the staff, standard operation procedures, forbidding dangerous processes and control of critical points.

• 국제학술발표논문집
• /
• The 7th International Conference on Construction Engineering and Project Management Summit Forum on Sustainable Construction and Management
• /
• pp.301-312
• /
• 2017

Quality evaluation and control represent increasingly important concerns for construction quality management. There is an evident need for a standard data model to be used as the basis for computer-aided quality management. This study focuses on how to realize evaluation of construction quality based on BIM and database technology. In this paper, the reinforced concrete main structure is taken as an example, and the BP neural network evaluation model is established by inquiring current construction quality acceptance specification and evaluation standard. Furthermore, IFC standard is extended to integrate quality evaluation information and realize the mapping of evaluation information in BIM model, contributing to the visualization and transfer sharing of evaluation information. Furthermore, the conceptual entity model is designed to build quality evaluation database, and this paper select MySQL workbench system to achieve the establishment of the database. This study is organized to realize the requirement of visualization and data integration on construction quality evaluation which makes it more effective, convenient, intuitive, easy to find quality problems and provide more comprehensive and reliable data for the quality management of construction enterprises and official construction administratiors.

• 국제학술발표논문집
• /
• The 6th International Conference on Construction Engineering and Project Management
• /
• pp.665-666
• /
• 2015

Recently BIM technology has been expanded for using in construction project. However its spread has been delayed than the initial expectations, due to the high-cost of BIM infrastructure development, the lack of regulations, the lack of process and so forth. In construction site phase, especially the analysis of current research trend about IT technologies, virtualization and BIM service, data exchange such as drawing, 3D model, object data, properties using cloud computing and virtual server system is defined as a most successful solution. The purpose of this study is enable the cloud computing BIM server to provide several main function such as edit a model, 3D model viewer and checker, mark-up, snapshot in high-performance quality by proper design of VDI system. Concurrent client connection performance is a main technical index of VDI. Through test-bed server client, developed VDI system's multi-connect control will be evaluated. The performance-test result of BIM server VDI will effect to development direction of cloud computing BIM service for commercialization.

• 한국BIM학회 논문집
• /
• 제9권3호
• /
• pp.41-53
• /
• 2019

As a central part in smart construction, BIM has been rapidly spread in construction industry at large. However, the level of applying BIM in construction stage is still relatively lower than that in design stage due to unclear application method, inadequate design BIM model, technical faults of BIM itself, etc. Under these circumstances, public owners inevitably need to adjust the scope and pace in BIM application considering their internal support and capabilities of contractors. This study aims to suggest major BIM-applicable tasks during construction stage in the process of establishing gradual long-term and short-term introduction strategy for public apartment housing projects. Those major tasks were identified with the combination of the importance of tasks and the future benefits of BIM using IPA method. To do so, the degrees of contribution to achieving objectives in construction, current task execution, and communication requirement were investigated by internal site managers. On the other hand, the expected benefits and current level of using BIM were assessed by BIM experts. Among operational tasks by phases, design review, construction plan review, making as-built drawing, etc. were categorized as major tasks. In addition, progress control, regular meeting, master schedule development, work inspection, on-site quality check, etc. were also drawn as major tasks by management areas. The results of this study will provide the useful reference for owners concerned about the introduction of new technologies.

• 한국건설관리학회논문집
• /
• 제16권4호
• /
• pp.118-128
• /
• 2015

BIM 기술은 현재 빠르게 건설 산업 전반에 적용 및 확산되고 있다. 그러나 고비용의 BIM 인프라, 법령의 부재, 운영 프로세스 등의 문제로 도입 초기의 기대와 달리 그 활용도면에서 만족할 만한 기대치를 채우지 못하고 있다. 설계 단계에서 수행되는 BIM 기술 기반의 협업 설계 인프라 구축은 성공적인 건설 프로젝트를 위한 필수 요소로 볼 수 있다. 현재 BIM은 클라우드 컴퓨팅기술과 결합하여 드로잉, 3D 모델링, 객체 데이터, 속성 정보 등을 생성할 수 있는 서비스 들이 파생되고 있으며 설계 인프라를 위한 핵심으로 떠오르고 있다. 본 논문은 VDI 시스템 환경 설정 및 구축을 통해 BIM 모델링, Viewing, 모델 체크, 마크업 등 BIM을 수행할 수 있는 서버 인프라 서비스 구축 방안을 제시한다. VDI 성능 시스템 테스트를 통하여 BIM 설계 환경에 필요한 가상 머신 리소스를 산정하고 배분하는 방식을 제안하여 클라우드 컴퓨팅 기반 BIM 설계 및 BIM 설계정보를 활용 프로젝트 운영 방향을 제시하고자 한다.

• Spatial Information Research
• /
• 제23권1호
• /
• pp.41-48
• /
• 2015

BIM 기술은 기존 2D 기반 도면처리에서 나아가 3D 모델링을 통한 시설물의 전 생애주기에 발생하는 데이터를 포함한다. 이러한 특성상 하나의 건물은 그 데이터의 방대한 양으로 엄청난 크기의 파일을 생산한다. 대표 표준포맷인 IFC가 그 예로, 객체 기반의 형상정보 및 속성정보를 기반으로 상당한 데이터를 포함한 대용량 처리에 대한 이슈가 종종 발생하고 있다. 이는 렌더링 속도를 증가시키고, 그래픽 카드 용량을 많이 차지하기 때문에, 화면 가시화 측면에서 비효율적이다. 대용량 데이터의 경량화 문제는 프로그램의 프로세스와 품질 측면에서 필수적으로 해결되어야 한다. 본 연구는 국내 및 해외 연구사례에서 경량화에 관련된 다양한 시도를 확인하였다. 이를 기반으로 대용량 BIM 데이터를 효과적으로 컨트롤하고 가시화하기 위해, BIM 특성을 고려하여 최대한 활용할 수 있는 데이터의 경량화 기법을 제안하고 검증하였다. 이는 웹 기반 GIS 플랫폼 상에서 대용량 시설물 데이터를 운용하는데, 최적의 시설물 유형을 분석하고 객체 기반의 IFC 특성을 최대한 활용하여 사용자 측면에서 화면전환의 품질을 확보하고 프로세스 측면에서 효과적인 메모리 운영을 확인하였다.

• 한국BIM학회 논문집
• /
• 제12권1호
• /
• pp.10-22
• /
• 2022

Prefabricated bridges require strict management of tolerance during fabrication and assembly. In this paper, digital engineering models for prefabricated bridge components such as deck, girder, pier, abutment are suggested to support information delivery through the life-cycle of the bridge. Rule-based modeling is used to define geometry of the members considering variable dimensions due to fabrication and assembly error. DfMA(design for manufacturing and assembly) provides the rules for ease of fabrication and assembly. The digital engineering model consists of geometry, constraints and corresponding parameters for each phase. Alignment and control points are defined to manage tolerances of the prefabricated bridge during fabrication and assembly. Quality control by digital measurement of dimensions was also considered in the model definition. A pilot bridge was defined virtually to validate the suggested digital engineering models. The digital engineering models for DfMA showed excellent potential to realize prefabricated bridges.

• KIEAE Journal
• /
• 제12권6호
• /
• pp.77-84
• /
• 2012

The current architectural design of unit modular has been based on 2D of CAD program, so unit modular character which needs unit information management, as a dried-member system, has no effect on design process. The purpose of this study is We have developed a suitable BIM design process, according to various works of construction, then tried to contribute to supply and activation of the urban-life-housing based on unit modular. The BIM modeling process based on unit modular has been in order of unit combination with preparing manual classification, and, it has been constructed, at construction site, from housing foundation to roof finish by Bottom-up method. At a manufacturing factory, it has been produced in order of 1) grouping materials and parts, 2) fabricating unit boxes, and 3) interference examination of unit boxes, and each order has been classified as housing structure, architecture, plumbing process separately. At a construction site, the fabrication has been done in order of, like as a real housing construction scenario, 1) RC foundation work 2) unit module job-site-fabrication work, 3) roof truss work, 4) plumbing and HVAC work, and 5) housing interior finish work. After modeling process, the interference examination on each work of construction has finally completed modeling. The Unit modular utilizing BIM modeling can make easy housing maintenance through systematic control with preparing manual of unit module information, and securing accurate and speedy construction information. And it will promote design credibility and create maximum effect of unit modular construction method, such as construction period reduction and upgrade of construction quality, etc., through the computer simulation as real as construction environment in cyber space, and with the interfering examination.