• Resources Recycling
• /
• v.23 no.6
• /
• pp.12-21
• /
• 2014

Nickel oxide ores are composed of two kinds of minerals; one is saprolite that is processed by smelting to obtain nickel products, and the other is limonite that is used in hydrometallugical processes. It is not efficient economically to process the mixture of limonite and saprolite, so the processes to saparate the ore mixture should be developed. In the present study, the mixture was separated by dry-classification after liberationg using grindability difference between limonite and saprolite. Consequently, it is possible to obtain the limonite with less than 10% of Mg+Si contents, which could be treated by hydrometallurgical processes, when the limonite contain less than 30% of saprolite.

• Journal of Korean Society of Transportation
• /
• v.32 no.3
• /
• pp.239-247
• /
• 2014

In modern society, the transportation sector is having difficulties with mobility, safety, energy and environment issues so that solutions should be prepared progressively. Recently developed countries are paying greater attention to car-sharing systems as alternatives for relieving problems caused by increasing number of vehicles. Car-sharing systems are believed to keep the number of personal vehicles down and traffic congestion due to the fact that this system induces efficiency of vehicle operation. In this study, authors focused on solving the imbalance problem of car-sharing systems dynamically, to specifically improve one-way car sharing service. Therefore vehicle relocation algorithm was designed for maximizing profit of car sharing operators. For the application of the vehicle relocation algorithm among rental offices, we selected Haeundae-gu, Busan as the area of study. Rental offices have been designated to the zone centroid and we calculated the shortest path between rental offices by using TransCAD. In the study, we adapted MATLAB for the application of vehicle relocation algorithm. As the results, the total vehicle relocation time was estimated as 59.9 minutes. In addition, vehicle relocation algorithm was verified successfully by using Decision Tree method.

• Korean Journal of Environmental Biology
• /
• v.36 no.1
• /
• pp.62-72
• /
• 2018

In order to provide important information for the efficient management of the identified farm ecosystem in Jinju Bay, we investigated the spatial and temporal distribution of the phytoplankton community using a UPLC pigment analysis and a CHEMTAX program from the timeframe of February 2013 to January 2014. In addition, we measured the available physical and chemical parameters controlling the distribution of the phytoplankton communities. As a result of this comprehensive pigment analysis, it was noted that the Diatoms were the predominant species with an average of 77.1% as noted located in Jinju Bay. It was discovered that during the summer season, the phytoplankton community composition was changed by a reduction of diatoms and noted increases of the Cryptophytes, Prasinophytes, and Dinoflagellates. Especially, it was noted that the Cryptophytes and Prasinophytes were shown with an average of 18.8% and 17.8% in June, respectively. However, it was revealed that the Cryptophytes and Prasinophytes were not shown by a microscopic observation. The phytoplankton community composition was correlated with the temperature and salinity variations as noticed in the Jinju Bay. Therefore, the water temperature and freshwater inputs in the Jinju Bay were important environmental factors for controlling the phytoplankton community composition and the varying Cryptophytes and the noted amounts of Prasinophytes as well.

• Applied Biological Chemistry
• /
• v.26 no.4
• /
• pp.231-238
• /
• 1983

N-Benzoylglycylanilide and N-benzoylalanylanilide derivatives were synthesized from N-benzoylglycine and N-benzoylalane with anilines. respectively. The products were identified by elemental analysis, IR, UV and NMR spectra with N-benzoylglycylanilide (I), N-benzoylglycyl-o-toluidide(II), N-benzoylglycyl-m-toluidide(III), N-benzoylglycyl-p-toluidide(IV), N-benzoyl-L-alanylanilide(V), N-bnzoyl-L-alanyl-o-toluidide(VI), N-benzoyl-L-alnnyl-m-toluidise(VII), N-benzoyl-L-alanyl-p-toluidide(VIII). These compounds were tested for their phytotoxicity to the germination and seedling growth of rice, radish, green pea plants and turf grass. Among them, N-benzoyl-Lalanyl-m-toluidide had strongly inhibitory effect on the seedling growth of radish seeds, and N-benzoyl-L-alanylanilide showed an inhibitory activity especially upon the seedling growth of turf seeds. In addition, the inhibitory rate of plant seed growth differed with the isomeric position(ortho, meta and para) of methyl group; N-benzoylglycyl-m-toluidide was more effective than both N-benzoylglycyl-o-toluidide and N-benzoylglycyl-p-toluidide derivatives, and also N-benzoyl-L-alanyl-m-toluidide was more effective than both N-benzoyl-L-alanyl-o-toluidide and N-benzoyl-L-alanyl-p-toluidide.

• Journal of Distribution Science
• /
• v.4 no.1
• /
• pp.27-51
• /
• 2006

This study is to understand the existing relation-marketing based on a result that social-relationship in market can effect on customer's action with expanding the seller-purchaser relationship, and understanding purchaser-purchaser relationship in the community. The result of this study could be summarized as below: First, the customer-sales person friendly relationship effects respectively on customer satisfaction and loyalty. Second, friendly relationship of customers effects on customer satisfaction and loyalty. Third, customers' satisfaction and trust increases customers loyalty. Considering that they could cause others to re-buy, friendly word of mouth, recommendations, we should know improving customers loyalty about a company(department store) is very important. This study presents not only customers and sales clerks relationship but also developing customer-customer relationship is important as well. From the viewpoint, this study gives the following strategic tactics to companies. First, customer's relationship with sales clerk is not able to be built in a short time unlike discount or gifts. Second, relationship around customers effects on loyalty of the department store, over the relationship of simple customer-sales clerk. Finally, companies, to make a relationship like fabric, should escape a two-level channel, a company to a customer, then recognize a three-level channel, a company to a friendly customer to a neutral or a unfriendly customer. That means a business should use the positive to make the negative or the neutral change their behavior to it.

• Journal of The Korean Society of Clinical Toxicology
• /
• v.10 no.1
• /
• pp.15-21
• /
• 2012

Purpose: Toxic alcohols are responsible for accidental and suicide motivated poisonings, resulting in death or permanent sequelae for the afflicted patients. Major therapeutic modalities in these cases include treatment with alcohol dehydrogenase inhibitors and extracorporeal elimination. There have been a number of case reports of toxic alcohol intoxication in Korea. The purpose of this study was to review the clinical characteristics of patients suffering toxic alcohol intoxication. Methods: We retrospectively reviewed the medical records of patients who presented with toxic alcohol intoxication at 8 emergency departments (ED) from Jun 2005 to Nov 2011. Patients who ingested methanol, isopropyl alcohol, ethylene glycol, and other alcohols except ethanol, were included in this study. The clinical characteristics of these patients were analyzed to include anion and osmolar gap, and estimated concentration of alcohol in the body. Results: During the study period, 21 patients were identified who had ingested toxic alcohol (methanol; 12 patients, ethylene glycol; 9 patients). At ED arrival, the mean anion gap was $18.7{\pm}6.9$ and the osmolar gap was elevated in 13 patients. Oral and IV ethanol were administrated to 11 patients in order to inhibit alcohol dehydrogenase. Extracorporeal elimination procedures such as hemodialysis were performed in 9 patients. There were no fatalities, but the one patient suffered permanent blindness. Conclusion: This study found that ethylene glycol and methanol were the substances ingested which produced toxic alcohol intoxication. The patients presented with high anion gap metabolic acidosis and were typically treated with oral ethanol and hemodialysis.

• Asian Journal of Turfgrass Science
• /
• v.26 no.1
• /
• pp.1-7
• /
• 2012

Field experiments were conducted to evaluate the morphological characteristics and growth rates of 101 medium-leaf type zoysiagrasses (Zoysia spp.) collected at the major sod production area (Jang Seong Gun) in South Korea. Collected lines with distinctive morphology and visual growth rate were planted in plastic pots and measured morphological characteristics under the plastic house conditions. Variation of leaf width, plant height, leaf angle, length of leaf sheath, trichome, stolon length, and color were measured. Six lines were selected by evaluating growth rates from one hundred one collected lines. Eight standard cultivars and three other superior lines previously collected were compared to 7 selected lines form Jang seong area by checking growth rates and morphological characteristics. Average leaf blade width was 3.4 mm, leaf angle was 45.8 degree, plant height was 21.6 cm, height of lowest leaf was 5.0 cm, and length of leaf blade was 14.1 cm. Ground cover rates of selected lines 'CY6097' and 'CY6069' were 70% and 68.3%, respectively. These are believed to be faster than 60% ground cover rate of zoysiagrass 'Anyang', and also, twice as faster than the 31.7% ground cover rate of Z. matrella. Selected line 'CY6069' showed fast growth rate with shorter internode length (5.1 cm) compared to zoysiagrass 'Anyang'. Based on the results of this study, we could select useful fast growing zoysiagrass breeding lines from the major sod production area (Jang Seong Gun) in Korea.

• Journal of the Korea Concrete Institute
• /
• v.20 no.3
• /
• pp.393-404
• /
• 2008

The approaches in many design codes for the estimation of the deflection of flexural reinforced concrete (RC) members utilize the concept of the effective moment of inertia which considers the reduction of flexural rigidity of RC beams after cracking. However, the effective moment of inertia in design codes are primarily based on the ratio of maximum moment and cracking moment of beam subjected to loading without proper consideration on many other possible influencing factors such as span length, member end condition, sectional size, loading geometry, materials, sectional properties, amount of cracks and its distribution, and etc. In this study, therefore, an experimental investigation was conducted to provide fundamental test data on the effective moment of inertia of RC beams for the evaluation of flexural deflection, and to develop a modified method on the estimation of the effective moment of inertia based on test results. 14 specimens were fabricated with the primary test parameters of concrete strength, cover thickness, reinforcement ratio, and bar diameters, and the effective moments of inertia obtained from the test results were compared with those by design codes, existing equations, and the modified equation proposed in this study. The proposed method considered the effect of the length of cracking region, reinforcement ratio, and the effective concrete area per bar on the effective moment of inertia, which estimated the effective moment of inertia more close to the test results compared to other approaches.

• The Journal of the Korea Contents Association
• /
• v.11 no.9
• /
• pp.443-452
• /
• 2011

This research aims at investigating the factors that affects the wearing of the nuclear protection equipment by radiology students. We measured the factors related to the wearing of the nuclear protection equipment based on the theory of planned behavior (TPB). We collected 192 survey records from 230 radiology students in Kwang-ju and Chun-nam providence who finished the clinical training. Based on Logistic Regression analysis, we found that the wearing of the nuclear protection equipment is statistically more probable as the level of study is lower, the scale of practicing hospital is smaller, the attitude rating is lower, and the rating of perceived behavioral control is higher. We argue that the development of educational program considering factors like the perceived behavioral control is required to enhance the degree of wearing the nuclear protection equipment in the clinical training of college students.

• Applied Chemistry for Engineering
• /
• v.24 no.4
• /
• pp.396-401
• /
• 2013

Alternating copolymers, poly[9-(2-octyl-dodecyl)-9H-carbazole-alt-4,7-di-thiophen-2-yl-benzo[1,2,5]thiadiazole] (PCD20TBT) and poly[9,10-bis-(2-octyl-dodecyloxy)-phenanthrene-alt-4,7-di-thiophen-2-yl-benzo[1,2,5]thiadiazole] (PN40TBT), were synthesized by the Suzuki coupling reaction. The copolymers were soluble in common organic solvents such as chloroform, chlorobenzene, 1,2-dichlorobenzene, tetrahydrofuran and toluene. The maximum absorption wavelength and the band gap of PCD20TBT were 535 nm and 1.75 eV, respectively. The maximum absorption wavelength and the band gap of PN40TBT were 560 nm and 1.97 eV, respectively. The HOMO and the LUMO energy level of PCD20TBT were -5.11 eV and -3.36 eV, respectively. As for PN40TBT, the HOMO and the LUMO energy level of PCD20TBT were -5.31 eV and -3.34 eV, respectively. The polymer solar cells (PSCs) based on the blend of copolymer and PCBM (1 : 2 by weight ratio) were fabricated. The power conversion efficiencies of PSCs based on PCD20TBT and PN40TBT were 0.52% and 0.60%, respectively. The short circuit current density ($J_{SC}$), fill factor (FF) and open circuit voltage ($V_{OC}$) of the device with PCD20TBT were $-1.97mA/cm^2$, 38.2% and 0.69 V. For PN40TBT, the $J_{SC}$, FF, and $V_{OC}$ were $-1.77mA/cm^2$, 42.9%, and 0.79 V, respectively.