• Transactions of the Korean Society of Automotive Engineers
• /
• v.16 no.4
• /
• pp.38-46
• /
• 2008

An object of this study is to understand the correlation between the characteristics of an engine performance and combustion characteristics, applying BD20 fuel reformed by ultrasonic energy irradiation to diesel engines. Before conducting the main experiment, an experiment was performed to determine the optimum injection timimg of reformed BD20 by ultrasonic energy irradiation. To control the duration of the ultrasonic energy irradiation, the capacity of an ultrasonic energy fuel supply system was tested with 550cc and 1100cc chambers. As the result of the analysis of the regular BD20 and reformed BD20 by ultrasonic energy irradiation, the BSFC and the Power of the reformed BD20 was improved 3% and 6%, respectively compared to those of non-irradiated BD20. When the fuel injection timing was delayed by $5^{\circ}$, the engine power was improved by 3%, and the BSFC was improved by 2%. The maximum cylinder pressure of reformed BD20 was improved by a maximum of 6% in comparison to that of regular BD20, and demonstrated a synergistic effect of 3% by delaying the injection timing $5^{\circ}$.

• 한국신재생에너지학회:학술대회논문집
• /
• 2011.05a
• /
• pp.220.2-220.2
• /
• 2011

Biodiesel and biodiesel blend fuel are receiving increasing attention as alternative fuels for diesel engines without substantial modifications. Biodiesel fuels and blending have been widely studied and applied in diesel engine because of biodiesel's lower sulfur, lower aromatic hydrocarbon and higher oxygen content. Biodiesels have the potential to be oxidized in different condition. It has reported that oxidation deterioration of biodiesel is different in the condition of storage and oxidation causes chemical property change of methyl esters. Sunlight intensity, temperature, material of container and contact surface with oxygen are key dominant factors accelerating oxidation deterioration. In this study, we chose temperature among key oxidation conditions and metal container filled with biodiesel was heated at about $110^{\circ}C$ for 10 days in order to accelerate oxidation deterioration. To better understand the effect of biodiesel blends on emission, steady state tests were conducted on a heavy duty diesel engine. The engine was fueled with Ultra Low Sulphur Diesel(ULSD), a blend of 10% and 20%(BD10, BD20) on volumetric basis, equipped with a common rail direct injection system and turbocharger, lives up to the requirements of EURO 3. The experimental results show that the blend fuel of normal biodiesel with BD10 and BD20 increased NOx. The result of PM was similar to diesel fuel on BD10, but the result of PM on BD20 was increased about 63% more than its of diesel. The blend fuel of Oxidation biodiesel with BD10 and BD20 increased NOx as the results of normal biodiesel. But PM was all increased on BD10 and BD20. Especially THC was extremely increased when test fuel contains biodiesel about 140% more than its of diesel. Through this study, we knew that oxidation deterioration of biodiesel affects emission of diesel engine.

• Journal of Biosystems Engineering
• /
• v.37 no.5
• /
• pp.296-301
• /
• 2012

Purpose: Combustion and fuel qualities of the animal-fats biodiesel as a heating fuel for agricultural hot air heater were studied. Methods: Biodiesel (BD) was made from animal-fats by reacting with methanol and potassium hydroxide in the laboratory. The biodiesel made in the laboratory was tested for fuel and combustion qualities. Results: The kinematic viscosity and the calorific values of the biodiesels were measured. Kerosene based biodiesel, BD20 (K) showed 18 cSt at $-20^{\circ}C$. It seemed that BD100 was not suitable for a heating fuel under some temperature. As BD content increased, the calorific value decreased up to 40,000 J/g for BD100, while the calorific value of light oil was 45,567 J/g showing difference of 5,567 J/g, about 12% difference. Several different fuels including BD20 (biodiesel 20% + light oil 80%), BD50 (biodiesel 50% + light oil 50%), BD100 (biodiesel 100%), and light oil were tested for fuel combustion qualities for agricultural hot air heater, and their combustion performances were compared and analyzed. Flame dimensions of biodiesels and light oils were almost the same shape at the same combustion condition. Generally, the $CO_2$ amounts of BDs were greater than light oil. However, in this study the differences were minor, so there was no significant difference existed between the BDs combustion and light oil. Conclusions: It seemed that quality was good for heating oil for agricultural hot air heater because of showing no barriers for continuous combustion and proper exhaust gas temperature and $CO_2$ amount discharged. But, for fuel fluidity for higher BD content fuel could be a detrimental problem in situations where the outdoor temperature is lowered. As BD content increased, calorific value decreased up to 40,000 J/g for BD100. Calorific value difference between BD20 and light oil was about 1,360 J/g.

• 한국신재생에너지학회:학술대회논문집
• /
• 2011.11a
• /
• pp.115-115
• /
• 2011

Biodiesel (BD) was made from animal-fats reacting with methanol and potassium hydroxide in the laboratory. The biodiesel made in the laboratory was sent to K-petro, the government agency, to inspect the quality of animal-fats biodiesel, of which generally the quality was acceptable for heating oil for agricultural hot air heater. Kinematic viscosity and calorific values of the biodiesels were measured. BD20(K), kerosene based biodiesel, showed 18cSt at $-20^{\circ}C$. It seems that BD100 can not be suitable for heating fuel under some temperature. As BD content increased calorific value decreased, up to 40,000J/g for 100% BD, while light oil calorific value was 45,567J/g, showing difference of 5,567J/g, about 12% difference. Several different fuels, BD20, BD50, BD100 and light oil, were prepared and tested for fuel combustion qualities for agricultural hot air heater and their combustion performances were compared and analyzed. Flame dimensions of biodiesels and light oil were almost same shape at the same combustion condition in the burner of the hot air heater. Generally $CO_2$ amounts of BDs are greater than light oil. But,the differences are so small that it is hard to tell there was significant difference existed between the BDs combustion and light oil.

• Transactions of the Korean hydrogen and new energy society
• /
• v.26 no.5
• /
• pp.393-401
• /
• 2015

The characteristics of diesel and biodiesel are similar like as cetane number and auto-ignition temperature. High cetane number of diesel and BD could make possible to compression ignition. but BD showed different atomization from diesel due to component like density, viscosity and iodine value etc. Because of this, the biodiesel requires validation. This study using diesel and BD20 investigated effect to durability injector. Durability test were used common rail and bosch solenoid type 5-hole injector. Total test was 672hr but actual running time was 200hr. Spray experiments for spray characteristics were carried out using constant volume combustion chamber. Spray characteristics of diesel and BD showed different result up to durability test time. After 100hr, diesel showed spray shapes were stable but BD was not. After 200hr, difference of diesel and BD spray shapes were grow serious.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.17 no.1
• /
• pp.39-48
• /
• 2009

Biodiesel is estimated to be the best recycling energy source as an alternative fuel for transportation vehicles which represents the biggest share of greenhouse effect gas exhausts. Thus, in order to widely expand use of biodiesel and to enhancement its reliability, studies on quality improvement of biodiesel is needed. In this study, we have produced biodiesel(BD100, BD20) through esterification reaction using raw material of waste frying oil and analyzed compatibility with 24 items of quality criteria. As waste frying oil has high contents of unsaturated fatty acid such as Oleic acid, Linoleic acid and Linolenic acid, it is confirmed that there is no problem in using the same as a raw material of biodiesel. The result of analyzing the quality criteria items of biodiesel showed that it satisfied all the quality criteria except the oxidation stability of BD100, which was 2 hours, fatty acid methyl ester of BD20, which was 18.6w% and the filter plugging point, which was $-5^{\circ}C$. We believe that it will contribute to improved utilization of waste resources as alternative energy if studies on technology to improve quality of some items are provided.

• Korean Journal of Clinical Laboratory Science
• /
• v.38 no.3
• /
• pp.189-195
• /
• 2006

Behcet's disease (BD) is a chronic, multisystemic disorder which is more frequently seen in the Mediterranean basin, Middle East, and Far East. The causes and pathogenesis of BD are unknown although many possibilities are being investigated. The diagnosis of BD is based on clinical manifestations because there are no pathognomonic laboratory tests. So, the purpose of this study was to examine the prevalence of HLA-B51 in patients with BD. We used the whole blood of 33 patients diagnosed with BD at Chosun University Hospital from August 2003 to January 2006. For the HLA-B51 test, we extracted the DNA from the whole blood of 33 BD patients, and we investigated it through the nested PCR method. Data were analyzed using the SPSS/PC 10.0. The frequencies of gender of the 33 cases diagnosed as BD were male 13 (39.4%) and female 20 (60.6%). The frequencies of age group of the 33 cases diagnosed as BD were 20 yrs 8 (24.2%), 30 yrs 12 (36.4%), 40 yrs 8 (24.2%), 50 yrs 1 (3.0%), and 60 yrs and 70 yrs 2 (6.1%), respectively. The frequencies of HLA-B51 of the 33 cases diagnosed as BD were HLA-B51-negative 18 (54.5%) and HLA-B51-positive 15 (45.5%). In conclusion, BD occurred more often in women than men (1: 1.53), and the mean age of the BD patients was 39.8 years old. HLA-B51 was positive in 45.5% of patients with BD, and was statistically significant in age (p<0.05).

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2017.04a
• /
• pp.60-60
• /
• 2017

화석연료의 고갈과 환경오염이 문제시 되면서 친환경 에너지개발에 대한 연구가 진행되고 있다. 그중 바이오디젤은 동,식물성유지 및 폐식용유를 이용하여 생산이 가능할뿐더러 농용엔진에 특별한 개조 없이 사용가능하다. 또한 바이오디젤 자체에 산소를 함유하고 있어 이산화탄소 저감에 효율적이다. 바이오 디젤에 관한 많은 연구가 수행되었으며, 기존의 연구는 단일유지의 폐식용유를 사용하여 바이오디젤을 생산하는 연구가 진행되었다. 하지만 가정에서 배출되는 식물성 폐식용유의 경우 여러 가지가 혼합되어 배출되고 있어, 혼합폐식용유지의 바이오디젤 특성평가가 필요하다. 따라서 본 연구에서는 폐식물성유지(폐대두유, 폐카놀라유, 폐해바라기유)를 중량비(1:4, 1:1.5 1:0.66, 1:0.25)로 혼합하여 바이오디젤을 생산하고, 생산한 바이오디젤을 농용기관에 이용하여 농용기관의 출력특성 및 배기배출물특성 평가를 실시하였다. 실험에 사용된 농용기관은 배기량이 673cc인 직접분사식 디젤기관(ND10DE, Daedong, Korea)이며, 엔진성능평가를 위해 토크는 토크센서(YDL-704s, Setech, Korea)를 사용하였다. 배기배출물 평가는 배기가스분석기(HG-550, Airlex, Germany)를 이용하여 이산화탄소, 질소산화물을의 배출량을 측정하였다. 폐식용유를 이용하여 생산한 바이오디젤과 경유의 기관성능을 비교한 결과 토크와 축출력의 경우 BD의 혼합량이 증가할수록 줄어들었다. 토크는 혼합된 유지에 따라 상용운전범위인 1500rpm~2400rpm에서 평균 대두와 카놀라유를 혼합하여 생산한 BD10은 7.2%, BD20은 12.1% 감소하였고, 대두와 해바라기유를 혼합하여 생산한 BD10은 11.3% BD20은 16.3% 감소하였다. 또한 해바라기와 카놀라유를 혼합하여 생산한 BD10은 8.3%, BD20은 14.6% 감소하였다. 이는 BD의 발열량이 경유에 비해 낮아 토크가 감소한 것으로 판단된다. 또한 배기배출물 평가의 경우 질소산화물은 BD의 함랑이 증가함에 따라 경유에 비해 배출량이 증가하는 경향을 보였고, 이산화탄소는 저감되는 것으로 나타났다. 이는 바이오디젤이 함산소연료이므로, 연료내의 산소로 인해 완전연소를 촉진시켜 이산화탄소를 저감시키고 질소산화물은 증가된 것으로 판단된다.

• Korea Petroleum Association Journal
• /
• no.5 s.254
• /
• pp.30-35
• /
• 2006

정유사들이 오는 7월부터 2년 동안 바이오디젤을 자발적으로 구매해 경유에 혼합 공급한다. 바이오디젤이란 콩이나 유채, 팜 등에서 추출한 식물성 유지나 폐식용유 등을 원료로 생산한 경우 대체연료로 정부가 지난 2002년부터 시범보급사업이 진행중이다. 그간의 시범보급사업에서 정부는 바이오디젤을 경유에 2:8로 혼합한 BD20 형태를 유지했지만 올해부터는 사정이 달라졌다. 주유소에서 판매가 허용되던 BD20 형태를 유지했지만 올해부터는 사정이 달라졌다. 주유소에서 판매가 허용되던 BD20은 7월 이후 자가 정비시설 등을 갖춘 연료 자가소비처로 유통을 한정하고 그 대신 모든 경유에 5% 이하의 바이오디젤을 혼합, 공급하는 'BD5' 방식을 선택했다. 하지만 'BD5'가 의무적인 것은 아니다. 현재 경유의 법정 품질기준에는 바이오디젤을 지칭하는 '지방산메틸에스테르 함량이 5% 이하까지 혼합할 수 있도록 하는 'BD5'기준이 설정되어 있지만 최저 혼합비율을 설정하지 않아 정유사 마음먹기에 따라서 전혀 혼합하지 않아도 된다. 혼합 가능한 상한선만 정해 있을 뿐 하한선은 없기 때문이다. 이와 관련해 정부는 2008년 월 이후부터 법으로 최저 혼합비율을 명시해 정유사들이 의무적으로 바이오디젤을 섞어 판매할 수 있도록 하겠다는 복안이다. 이에 앞서 정유사들은 지난 3월 산업자원부와 협약을 맺고 올해 7월부터 2008년 6월까지 2년동안 바이오디젤을 자발적으로 구매해 경유에 혼합 공급하겠다고 선언했다. 구매 물량은 연간 9만톤 수준으로 정부가 의도중인 2008년 7월 이후의 본 보급에 앞선 사실상의 마지막 실험 무대가 될 수 있다는 측면에서 중요한 의미를 갖게 된다. 바이오디젤이 대중적으로 보급되기 위해서 필수적으로 갖춰야 하는 원료의 안정적인 수급이나 품질의 안정성, 가격경쟁력 등이 향후 2년간의 과정에서 충분히 검증돼야만 본 보급에 착수할 수 있기 때문이다. 이처럼 중요한 시점에서 바이오디젤시장이 안고 있는 문제점을 점검해 보고자 한다.

• Korean Journal of Microbiology
• /
• v.49 no.1
• /
• pp.46-50
• /
• 2013

Some rhizobacteria producing 1-aminocyclopropane-1-carboxylic acid (ACC) deaminase can make plant to continue growth under the stress conditions through lowering the level of phytohormone, ethylene which inhibits the plant growth and accelerates plant aging. In this study, some rhizobacteria producing ACC deaminase have been isolated from the rhizosphere of plants grown at sand beaches, and identified as Escherichia hermannii m-2, Enterobacter asburiae m-4, Pseudomonas thivervalensis BD2-26 and Pseudomonas brassicacearum subsp. neoaurantiaca BD3-35 through sequencing of 16S rRNA genes. Strain BD3-35 showed the highest activity of ACC deaminase among the isolates, 20.26 ${\alpha}$-ketobutyrate ${\mu}M/mg$ protein/h. Strains BD3-35 and BD2-26 secreted a phytohormone cytokinin, and strains m-4 and m-2 could produce auxin and abscisic acid, respectively. When these bacteria were applied to the 7-day old tomato plant under drought stress for 7 days, strains BD3-35, m-2, and m-4 increased the length of tomato root by 14, 15, and 35%, respectively, and strains m-2, BD2-26 and BD3-35 increased the dry weight of tomato plant by 22, 33, and 68%, respectively compared to the uninoculated control tomatoes. Therefore, these rhizobacteria may be utilized as a microbial fertilizer for the plants under drought stress.