• Korean Management Science Review
• /
• v.32 no.4
• /
• pp.193-207
• /
• 2015

Government-funded research institutes (GRIs) have played a pivotal role in national R&D in Korea. To achieve desired goals of GRIs with the limited R&D budget, their performance along with time needs to be measured and compared so that appropriate R&D policies can be formulated and implemented. This study measures the dynamic performance of GRIs from the efficiency perspective using the window model of data envelopment analysis (DEA). DEA is a non-parametric approach to measuring the relative efficiency of decision-making units (DMUs) with multiple inputs and outputs, and the DEA window model can capture the dynamic changes in efficiency of DMUs during multiple periods. The relative efficiency of GRIs is measured from the two perspectives: R&D and R&BD. Patents, papers, technology transfers are selected as outputs for R&D while compensated technology transfers and technology royalty are employed as outputs for R&BD. This study measures and compares the two types of performance of 20 Korean GRIs under the control of National Research Council of Science and Technology during the period of six years from 2008 to 2013. The results are expected to provide fruitful implications for national R&D policy making.

• The Bulletin of The Korean Astronomical Society
• /
• v.37 no.1
• /
• pp.55.1-55.1
• /
• 2012

2010년과 2011년의 관측시즌에 총 23일의 BVR 측광 관측을 통하여 처음으로 얻은 2세트의 BVR 광도 곡선을 분석하였다. 새로운 두 세트의 BVR 광도곡선은 제1식과 제2식의 깊이가 거의 비슷하지만, 식바깥 부분에서 관측 시즌에 따라 서로 다른 모양의 잘 발달된 파형 모양을 보인다. 이는 BD And가 흑점이 활동이 매우 심한 짧은 주기의 RS CVn형 식쌍성임을 나타내는 것이다. 우리의 극심시각을 포함한 모든 극심시각을 분석하여 BD And의 공전주기가 규칙적으로 변하는 것을 발견하였다. 이 변화를 보이지 않는 제3천체에 의한 광시간 효과로 가정하여, 궤도이심율이 0.83이며, 9.15년의 주기를 가진 광시간 궤도를 결정하였다. Wilson-Devinney 쌍성 모형을 이용하여 흑점과 제3광도를 고려한 두 세트의 광도곡선 해를 산출하였고, BD And의 절대량을 구하였다. 식바깥의 파형 모양의 변화는 주성의 표면에 매우 큰 두 개의 흑점과 그 위치와 이동으로 잘 설명되며, 전체 광도의 약 15%에 해당되는 제3광도가 검출되었다. 주기연구에서 구한 제3천체의 궤도요소와 제3광도의 결합으로 제3천체의 질량과 궤도경사각을 유추하였다. BD And의 성분별의 평균 나이가 등연령 곡선으로부터 태양과 비슷한 4.6${\times}$109년으로 산출되었다. BD And를 포함하여 현재까지 알려진 짧은 주기의 RS CVn형 쌍성들의 H-R도가 항성진화 경로와 함께 제시되며, 그 천체물리학적 의미를 살펴본다.

• JOURNAL OF ELECTRICAL WORLD
• /
• s.453
• /
• pp.68-72
• /
• 2014

• TTA Journal
• /
• s.89
• /
• pp.124-129
• /
• 2003

• Journal of Welding and Joining
• /
• v.32 no.4
• /
• pp.10-14
• /
• 2014

Laser aided Direct Metal Tooling(DMT) process is a kind of Additive Manufacturing processes (or 3D-Printing processes), which is developed for using various commercial steel powders such as P20, P21, SUS420, H13, D2 and other non-ferrous metal powders, aluminum alloys, titanium alloys, copper alloys and so on. The DMT process is a versatile process which can be applied to various fields like the mold industry, the medical industry, and the defense industry. Among of them, the application of DMT process to the mold industry is one of the most attractive and practical applications since the conformal cooling channel core of injection molds can be fabricated at the slightly expensive cost by using the hybrid fabrication method of DMT technology compared to the part fabricated with the machining technology. The main objectives of this study are to provide various characteristics of the parts made by DMT process compared to the same parts machined from bulk materials and prove the performance of the injection mold equipped with the conformal cooling channel core which is fabricated by the hybrid method of DMT process.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.4
• /
• pp.1859-1864
• /
• 2014

Liquid silicone rubber(LSR) has been applied to various products such as electronic devices owing to its excellent thermal and chemical resistance. Hyperelastic materials, however, have properties distinguished from general metal materials. Hyperelastic materials show elastic behaviors in the range of large deformation in which load has the nonlinear relation with deformation. In addition, they have characteristics of nonlinearity, incompressibility, in large scale. On account of such characteristics, there are many difficulties in design and production using these materials. In this study, the load-deformation relation obtained from tension and compression tests was applied to finite element analysis in order to design waterproof connectors for automobiles. Furthermore, the effectiveness of the finite element analysis was confirmed by comparing the results of analysis with those of performance tests.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.6
• /
• pp.4024-4031
• /
• 2014

Nanofibers have attracted significant interest in many industrial fields because their high surface area and porosity. In addition, the continued use of petrochemical based polymers has caused the depletion of oil resources and accelerated the greenhouse effect by the emission of carbon dioxide. Therefore, biomass-based polymer has become a very important environmentally friendly alternative. In this study, nanofibers were fabricated by an electrospinning process using biomass based PEF(polyethylene furoate) prepared by the polymerization of 2,5-furandicaboxylic acid and ethylene glycol. Furthermore, the electrospun nanofiber was strongly affected by various parameters, such as the solvent, polymer concentration and electric field. In conclusion, nanofibers with an average fiber diameters of 200 - 700 nm could be prepared at polymer concentration of 15 wt% using HFIP, and their fiber diameter increased with increasing electric field.

• Elastomers and Composites
• /
• v.49 no.3
• /
• pp.225-231
• /
• 2014

In this study, we used polypropylene grafted with itaconic acid (PP-g-IA) as a compatibilizer to prevent phase separation phenomenon which occurs upon blending polypropylene (PP) and ethylene-vinyl alcohol copolymer (EVOH). A compatibilizer was prepared using graft copolymerization of itaconic acid (IA) onto PP where input ratio of IA was 1, 2, 5, and 10 wt.%. To confirm the structure of PP-g-IA and the graft ratio of IA onto PP, we used $^1H$ NMR and FT-IR. We tested the compatibilizer which has highest graft ratio of 1% in immiscible PP/EVOH blends. The morphologies of PP/PP-g-IA/EVOH blends were analyzed by SEM. Thermal and mechanical properties of the blends were analyzed by DSC and UTM. PP-g-IA enhanced the interfacial adhesion of PP and EVOH copolymer.

• Journal of Microbiology and Biotechnology
• /
• v.18 no.11
• /
• pp.1773-1784
• /
• 2008

Effects of various industrially important carbon sources (glucose, sucrose, xylose, gluconate, and glycerol) on shikimic acid (SA) biosynthesis in Escherichia coli were investigated to gain new insight into the metabolic capability for overproducing SA. At the outset, constraints-based flux analysis using the genome-scale in silico model of E. coli was conducted to quantify the theoretical maximum SA yield. The corresponding flux distributions fueled by different carbon sources under investigation were compared with respect to theoretical yield and energy utilization, thereby identifying the indispensable pathways for achieving optimal SA production on each carbon source. Subsequently, a shikimate-kinase-deficient E. coli mutant was developed by blocking the aromatic amino acid pathway, and the production of SA on various carbon sources was experimentally examined during 51 batch culture. As a result, the highest production rate, 1.92 mmol SA/h, was obtained when glucose was utilized as a carbon source, whereas the efficient SA production from glycerol was obtained with the highest yield, 0.21 mol SA formed per mol carbon atom of carbon source consumed. The current strain can be further improved to satisfy the theoretically achievable SA production that was predicted by in silico analysis.

• Journal of Microbiology and Biotechnology
• /
• v.27 no.2
• /
• pp.306-315
• /
• 2017

Metabolic engineering with a high-yielding mutant, A. terreus AN37, was performed to enhance the production of itaconic acid (IA). Reportedly, the gene cluster for IA biosynthesis is composed of four genes: reg (regulator), mtt (mitochondrial transporter), cad (cis-aconitate decarboxylase), and mfs (membrane transporter). By overexpressing each gene of the IA gene cluster in A. terreus AN37 transformed by the restriction enzyme-mediated integration method, several transformants showing high productivity of IA were successfully obtained. One of the AN37/cad transformants could produce a very high amount of IA (75 g/l) in shake-flask cultivations, showing an average of 5% higher IA titer compared with the high-yielding control strain. Notably, in the case of the mfs transformants, a maximal increase of 18.3% in IA production was observed relative to the control strain under the identical fermentation conditions. Meanwhile, the overexpression of reg and mtt genes showed no significant improvements in IA production. In summary, the overexpressed cis-aconitate decarboxylase (CAD) and putative membrane transporter (MFS) appeared to have positive influences on the enhanced IA productivity of the respective transformant. The maximal increases of 13.6~18.3% in IA productivity of the transformed strains should be noted, since the parallel mother strain used in this study is indeed a very high-performance mutant that has been obtained through intensive rational screening programs in our laboratory.