• Earthquakes and Structures
• /
• 제14권5호
• /
• pp.411-424
• /
• 2018

This study explores the inelastic behavior of systems with flexible base. The use of a single degree of freedom system (ESDOF) with equivalent ductility to represent the response of flexible base systems is discussed. Two different equations to compute equivalent ductility are proposed, one which includes the contribution of rigid body components, and other based on the overstrength of the structure. In order to asses the accuracy of ESDOF approach with the proposed equations, the behavior of a 10-story regular building with reinforced concrete (RC) moment resisting frames is studied. Local and global ductility capacity and demands are used to study the modifications introduced by base flexibility. Three soil types are considered with shear wave velocities of 70, 100 and 250 m/s. Soil-foundation stiffness is included with a set of springs on the base (impedance functions). Capacity curves of the building are computed with pushover analysis. In addition, non linear time history analysis are used to asses the ductility demands. Results show that ductility capacity of the soil-structure system including rigid body components is reduced. Base flexibility does not modify neither yield and maximum base shear. Equivalent ductility estimated with the proposed equations is fits better the results of the numerical model than the one considering elastoplastic behavior. Modification of beams ductility demand due to base flexibility are not constant within the structure. Some elements experience reduced ductility demands while other elements experience increments when flexible base is considered. Soil structure interaction produces changes in the relation between yield strength reduction factor and structure ductility demand. These changes are dependent on the spectral shape and the period of the system with fixed and flexible base.

• 대한임베디드공학회논문지
• /
• 제5권3호
• /
• pp.118-127
• /
• 2010

Inter-vehicle communication is one of the most important parts in Intelligent Vehicle System. Through this communication, drivers can recognize what is happening out of their sights, such as the freezing condition of the street, traffic accidents, and so on. Each car in IVS gives various services to the drivers after analyzing those received information from cars or a base station. If the message is, however, exchanged from car to car directly, the computation cost which is needed for all the car to authenticate the transmitted message between nearby cars is tremendously high. Therefore, one can naturally think that the message communication between cars is performed with the help of the base station to reduce the computation cost. In this case where the base station collects all the information transmitted from cars and broadcasts them nearby, there should be an efficient way both for the base station to authenticate the car message within its communication range and for the car to authenticate the information received from the base station. In this paper, we present a two-way authentication protocol using a hash chain to efficiently exchange GPS information between a car and a base station. This information can be used to provide a driver with the navigation which displays all the moving cars around him in real time. When a car goes into an area of a base station, the car authenticates itself to the base station using its private key of PKI, sends a commitment of a hash chain, then starts to send a message with the hash value for authentication. The message includes GPS information, driver's status and so on. The base station also authenticates itself to the nearby cars using its private key, transmits the commitment of the hash chain, and sends all the messages gathered from cars with authentication information.

• 농업과학연구
• /
• 제46권4호
• /
• pp.885-895
• /
• 2019

Plant biotechnologists have long dreamed of technologies to manipulate genes in plants at will. This dream has come true partly through the clustered regularly interspaced short palindromic repeats (CRISPR)/Cas9 technology, which now has been used to edit genes in several important crops. However, there are many restrictions in editing a gene precisely using the CRISPR/Cas9 technology because CRISPR/Cas9 may cause deletions or additions in some regions of the target gene. Several other technologies have been developed for gene targeting and precision editing. Among these, base editors might be the most practically and efficiently used compared to others. Base editors are tools which are able to cause a transition from cytosine into thymine, or from adenine into guanine very precisely on specific sequences. Cytosine base editors basically consist of nCas9, cytosine deaminase, and uracil DNA glycosylase inhibitor (UGI). Adenine base editors consist of nCas9 and adenine deaminase. These were first developed for human cells and have since also been applied successfully to crops. Base editors have been successfully applied for productivity improvement, fortification and herbicide resistance of crops. Thus, base editor technologies start to open a new era for precision gene editing or breeding in crops and might result in revolutionary changes in crop breeding and biotechnology.

• 대한치과교정학회지
• /
• 제22권1호
• /
• pp.229-239
• /
• 1992

This study was performed to define the adaptation patterns of each skeletal components to the flexures of cranial bases, using 91 males from the ages of 17 to 36 and 64 females from the ages of 16 to 34, without orthodontic or prosthetic treatment experiences and with pleasant profiles as subjects. The conclusions are as follow: 1. When considering the changes of flexure of cranial base (Ba-SE-FMN) in both sexes, changes in the anterior cranial base angle to the PM Vertical line (SE-FMN/PMV) were greater than the changes in the posterior cranial base angle to the PM Vertical line (Ba-SE/PMV). Subsequently the nasomaxillary complex showed antero-superior rotating effect as the cranial base angles were increased and postero-inferior rotating effect as they were decreased. 2. Horizontal mandibular angle (Ba-SE-Me) was increased in both sexes as cranial base angle increases (Ba-SE-FMN) and it decreased as the latter was decreases. There by indicating compensatory effects. 3. Maxillary angle (SE-FMN-A) was decreased in both sexes as cranial base angle (Ba-SE-FMN) increases and it increased as the latter was decreased. There by indicating compensatory effects. 4. Mandibular ramus angle to posterior cranial base was decreased in both sexes as cranial base angle increases. There by indicating compensatory effect to anteriorly displaced maxilla and the mandibular ramus angle was increased as the cranial base angle decreases. There by indicating compensatory effect to posteriorly displace maxilla. 5. The length of posterior upper facial height was decreased in both sexes as the cranial base angle increases and it increased as the latter was decreased.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제33권3호
• /
• pp.204-210
• /
• 2007

This study was intended to compare the cranial base morphology between the mandibular prognathism and maxillary retrognathism in skeletal class III patients. The subject of the present study was composed of 88 patients divided into two groups; Group 1 (Skeletal Class III with mandibular prognathism. SNA within normal range, SNB over normal range, n=54) and Group 2(Skeletal Class III with maxillary retrognathism. SNA below normal range, SNB within normal range, n=34). Lateral cephalogram were taken immediate before surgery and 18 landmarks were used to analyze the characteristics of cranial base and maxillomandibular skeleton. The result revealed that cranial base angle is significantly smaller in Group 1 than Group 2, which implies the influence of the cranial base angulation on the mandibular position. However the posterior cranial base length did not influence the mandibular horizontal position and anterior cranial base length did not influence the maxillary horizontal position. As the anterior cranial base length was closely related with ramal height, it is recommendable to investigate the regulatory mechanism of chondrogenesis of cranial base and condyle cartilage in the future research.

• 분석과학
• /
• 제8권3호
• /
• pp.265-272
• /
• 1995

본 연구는 중금속 이온의 신속한 현장분석을 위하여 HPLC용 Schiff Base 컬럼과 Glow Discharge 검출기의 개발에 관한 연구결과를 정리한 것이다. 현재 사용한 컬럼의 소재로는 hydrazide Schiff base 리간드인 N, N'-oxalybis(salicylaldehydrazone) (OBSH), N, N'-malonylbis (salicylaldehydrazone) (MBSH), 그리고 N, N'-succinylbis(salicylaldehydrazone) (SBSH)들과 HPLC 컬럼용 고분자 수지인 poly(styrene divinylbenzene)를 혼합하여 그 특성을 관찰하고 앞으로의 HPLC용 컬럼으로서의 응용성을 살펴보았다. 다음으로 중금속 이온들의 효과적인 검출을 수행할 수 있는 검출기의 필요성에 따라 현재 본 연구실에서 새로 개발한 Hollow Cathode Glow Discharge-Atomic Emission Spectrometry(HCGD-AES)를 사용하여 금속이온의 검출을 수행하였다. 이때 리간드-수지 혼합 컬럼을 통하여 용리된 용리액 중의 구리, 루비듐, 납, 수은 등의 금속이온 검출을 시도하였고, 실험결과를 토대로 Schiff Base를 사용한 컬럼이 금속이온에 따라 선택성을 보여 주고 있음을 살필 수 있었다. 또한 금속이온의 검출을 위한 HPLC용 검출기의 개발을 글로우 방전을 이용하여 추진하고 있으며 이에 대한 기초실험 결과를 정리하였다.

• Journal of Welding and Joining
• /
• 제25권5호
• /
• pp.45-50
• /
• 2007

The Ni-base superalloy GTD111 DS is used in the first stage blade of high power land-based gas turbines. Advanced repair technologies of the blade have been introduced to the gas turbine industry over recent years. The effect of the filler metal powder on Transient Liquid Phase bonding phenomenon and tensile mechanical properties was investigated on the GTD111 DS superalloy. At the filler metal powder N series, the base metal powders fully melted at the initial time and a large amount of the base metal near the bonded interlayer was dissolved by liquid inter metal. Liquid filler metal powder was eliminated by isothermal solidification which was controlled by the diffusion of B into the base metal. The solids in the bonded interlayer grew from the base metal near the bonded interlayer inward the insert metal during the isothermal solidification. The bond strength of N series filler metal powder was over 1000 MPa. and ${\gamma}'$ phase size of N series TLP bonded region was similar with base metal by influence of Ti, Al elements. At the insert metal powder M series, the Si element fluidity of the filler metal was good but microstructure irregularity on bonded region because of excessive Si element. Nuclear of solids formed not only from the base metal near the bonded interlayer but also from the remained filler metal powder in the bonded interlayer. When the isothermal solidification was finished, the content of the elements in the boned interlayer was approximately equal to that of the base metal. But boride and silicide formed in the base metal near the bonded interlayer. And these boride decreased with the increasing of holding time. The bond strength of M series filler metal powder was about 400 MPa.

• 대한물리치료과학회지
• /
• 제15권3호
• /
• pp.31-41
• /
• 2008

Purpose : The purpose of this study is to examine the muscle activity of shoulder stabilization according to change of supporting base interval between push-up bend and push-up plus position and is to prevent or treat a shoulder injury by the most effective exercise for rehabilitation. Methods : This study analyzed the muscle activity according to change of supporting base interval between push-up bend and push-up plus movement. The participants without neuromuscular disease were 25 students - 12 males and 13 females - all twenty or over and the surface electrode of EMG attached on pectoralis major, triceps long head, middle trapezius, lower trapezius, serratus anterior and latissimus dorsi. The process has practiced 3 sessions of supporting base interval - narrowing interval, two shoulder interval, broad interval - by push-up bend and push-up plus movement. Result : 1. The muscle activity of pectoralis major was significantly increased according to narrow interval of supporting base on push-up plus movement and was significant difference(p<.05). 2. The muscle activity of biceps was significantly increased according to narrow interval of supporting base on push-up bend movement(p<.05). 3. The muscle activity of middle or lower trapezius was a difference according to change of supporting base on push-up bend and push-up plus movement but was not significant difference. 4. The muscle activity of serratus anterior was significantly increased according to broad interval of supporting base on push-up bend movement(p<.05). 5. The muscle activity of latissimus dorsi was significantly increased according to broad interval of supporting base on push-up bend movement(p<.05). Conclusion : These results lead us to the conclusion that push-up bend exercise have the effect of muscle strength of biceps on narrowing interval, of serratus anterior or latissimus dorsi on broad interval and push-up plus exercise have the effect of muscle strength of pectoralis major on narrowing interval of support base.

• 대한치과보철학회지
• /
• 제39권3호
• /
• pp.250-259
• /
• 2001

Since the late 1930s, acrylic resins have been the materials of choice for the fabrication of complete denture bases. It has excellent esthetic properties, adequate strength, low water sorption, and low solubility. But acrylic resin has disadvantage of processing shrinkage that reduces denture retention and accuracy of denture occlusion. Metals also have been used in denture base material. Metals used in denture bases display excellent strength and dimensional stability. The major disadvantages associated with metal denture bases include increased cost, difficulty in fabrication, compromised esthetic qualities, and inability to re-base. The purpose of this study is to compare the artificial tooth movements of complete dentures with resin bases and metal bases after curing, deflasking, polishing immersion in water for 1 week and 4 weeks. Twenty-four maxillary complete resin denture bases with artificial teeth were fabricated. Twelve of them were resin based and other twelve of them were metal based. Fine crosses were marked on the incisal edges of right central incisors and distobuccal cusps of be second molars. Measurements were done for the changes of distances of reference points at the time of wax denture, after deflasking after decasting after polishing after immersion in water for 1 week and 4 weeks Meaurements were done to the accuracy of 0.001mm with a measuring microscope. The results were as follows : 1. Metal base showed significantly less tooth movement than resin base after curing and decasting (p<0.01). 2. Metal base showed significantly less tooth movement than resin base after polishing (p<0.01). 3. After immersion in water for 1 week and 4 weeks, metal base showed less movement than resin base. Difference was significant for anterior-posterior distances (p<0.01), but not significant for molar-to-molar distance (p>0.01). 4. 1 week and 4 weeks of immersion failed to compensate the initial processing shrinkage of metal and resin bases (p>0.01).

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2009년도 공동학술대회
• /
• pp.55-59
• /
• 2009

1999년부터 운영이 시작된 해안 DGPS 기준국을 기반으로 우리나라에서는 내륙에서의 NDGPS 이용을 위하여 2002년부터 무주 기준국을 시작으로 하여 2009년 7월에 운영될 춘천기준국에 이르기까지 6개의 내륙 기준국의 구축을 완료하게 되었다. 이에 현재 구축이 진행 중인 춘천 기준국을 제외한 5개의 내륙기준국의 신호 특성을 조사 분석하여 더 나은 내륙 기준국의 서비스의 발전방향을 고찰하고자 한다.