• Korean Journal of Food Science and Technology
• /
• v.31 no.5
• /
• pp.1268-1274
• /
• 1999

Pine twigs with buds were cut into $2{\sim}3\;mm$ long pieces and about 18g was used for each experiment. Pressure and temperature ranges employed were $100{\sim}300\;bar$ and $35{\sim}55^{\circ}C$, respectively. Volatile compounds of extracts were isolated and identified by gas chromatography and mass selective detector. Twenty three compounds from the extracts were identified. Limonene and ${\beta}-pinene$ were found to be the major components with $32.6{\sim}43.4%$ being limonene. Extracts obtained by supercritical fluid extraction were lower in monoterpene and higher in oxygenated terpenoids than those by steam distillation and solvent extraction (SDE). Sensory evaluation showed that the pine flavor extracted using supercritical carbon dioxide was much better in quality than that of SDE. In conclusion, it was found out that supercritical fluid extraction can successfully be applied to extract high quality flavor from pine.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.11a
• /
• pp.177-180
• /
• 2008

Recently, the research of FRP bar as an alternative reinforcing material in reinforced concrete structures has increased to get an innovative solution to the corrosion problem. In addition to the noncorrosive nature of FRP materials, they also have a high strength-to-weight ratio. Therefore, when light weight concrete reinforced with FRP bar is used in marine environment, for instance floating structures, some advantages can be expected. But researches for the light weight concrete structure using FRP bar as a flexural reinforcement are limited to date. In this paper, the concrete shear contribution of the light weight concrete beam reinforced with GFRP bar was studied. Experiment for beams varying concrete compressive strengths and flexural reinforcement ratios was conducted and analysed. The test results showed that 75% of values obtained from proposed equation in preceding research were well agreed with the test results and were better results than the one predicted by the ACI 440.1R-06 code.

• Journal of the Korea Concrete Institute
• /
• v.15 no.6
• /
• pp.811-819
• /
• 2003

The corrosion of steel reinforcing bar(re-bar) has been the major cause of the reinforced concrete deterioration. FRP(Fiber-reinforced polymer) reinforcing bar has emerged as one of the most promising and affordable solutions to the corrosion problems of steel reinforcement in structural concrete. However, FRP re-bar is pone to deteriorate due to other degradation mechanisms than those for steel. The high alkalinity of concrete, for instance, is a possible degradation source. Other potentially FRP re-bar aggressive environments are sea water, acid solution and fresh water/moisture. In this study long-term durability performance of FRP re-bar were evaluated. The mechanical and durability properties of two type of CFRP-, GFRP re-bar and one type of AFRP re-bar were investigated; the FRP re-bars were subjected to alkaline solution acid solution, salt solution and deionized water. The mechanical and durability properties were investigated by performing tensile, compressive and short beam tests. Experimental results confirmed the desirable resistance of FRP re-bar to aggressive chemical environment.

• Korean Journal of Acupuncture
• /
• v.21 no.1
• /
• pp.175-199
• /
• 2004

Objectives : To study acupuncture and moxibution treatments for stomatopathy( aphthae, oral ulceration, mycolic stomatitis, halitosis, thirst, bitter) the ancient and the present literatures were reviewed. Methods : We've got compared and analyzed 55 kinds of literatures. Results and Conclusions : 1. The acupuncture meridians used frequently for stomatopathy were $Su-yangmy\bar{o}ng-Taejang-ky\bar{o}ng(LI),\;Chok-yangmy\bar{o}ng-Wi-Ky\bar{o}ng(S),\;Immaek-Ky\bar{o}ng(CV)$. 2. The acupoints used frequently for aphthae were $Sungjang(CV_{24}),\;Yomchon(CV_{23}),\;Hapkok(LI_4),\;Nogung(P_8),\;Chok-samni(S_{36}),\;Hyopko(S_6),\;Sugu(GV_{26})$. 3. The acupoints used frequently for oral ulceration were $Hapkok(LI_4),\;Nogung(P_8),\;Chok-samni(S_{36}),\;Kokchi(LI_{11}),\;Sotaek(SI_1),\;Pisu(B_{20}),\;Wisu(B_{21}),\;Samgan(LI_3),\;Yomchon(CV_{23}),\;Chichang(S_4)$. 4. The acupoints used frequently for mycolic stomatitis were $Hapkok(L_4),\;Chichang(S_4),\;Hyopko\;(LI_4),\;Sungjang(CV_{24}),\;Samumgyo(SP_6)$. 5. The acupoints used frequently for halitosis were $Naejong(S_{44}),\;Chok-samni(S_{36}),\;Chung-wan\;(CV_{12}),\;Sang-wan(CV_{13}),\;Hawan(CV_{10}),\;Kongson(SP_4),\;Wisu(B_{21}),\;Nogung(P_8),\;Sugu(GV_{26}),\;Sungjang(CV_{24})$. 6. The acupoints used frequently for thirst were $Sosang(L_{11}),\;Sangyang(LI_1),\;Sotaek(SI_1),\;Kwanch'ung(TE_1),\;Ch'\bar{o}kt'aek(L_5),\;T'ae-gye(K_3),\;Kokt'aek(P_3),\;Sugu(GV_{26}),\;Samgan(LI_3),\;Igan(LI_2),\;T'aech'ung(Liv_3),\;Sojangsu(B_{27})$. 7. The acupoints used frequently for bitter were $Yangn\bar{u}ngch'\bar{o}n(G_{34}),\;Hy\bar{o}njong(G_{39}),\;Kwanch'ung(TE_1),\;Tamsu(B_{19}),\;Chokkyu\bar{u}m(G_{44}),\;Y\bar{o}n-gok(K_2),\;Shinmun(H_7),\;Chok-Samni(S_{36})$.

• The Journal of the Korean dental association
• /
• v.54 no.12
• /
• pp.1024-1034
• /
• 2016

Purpose. The purpose of this study was to compare the type and frequency of prosthetic complications associated with attachment types for implant overdenture. Material and methods. In this retrospective study, 38 patients (mean age, 63.5 years) have been treated with implant overdentures from 2007 to 2014. Ten patients received a bar-clip attachment. Eleven patients had received a milled bar with Locator attachment. Seventeen patients had received a Locator attachment. The mean follow-up period was 36.9 months (range, 15-83 months). The type and frequency of prosthetic complications was recorded. The frequency was analyzed to determine the statistical difference among the 3 different attachments by using one-way ANOVA (${\alpha}=.05$) and Bonferroni post hoc method at a 5% level of significance. Results. The total number of prosthetic complications was higher in the bar-clip attachment (55 events) than in the milled bar with Locator attachment (39 events) and the Locator attachment (34 events). There were no statistically significant differences, and the most common prosthetic complication was the loss of retention. In the bar-clip attachment group, the average frequency of prosthetic complications was 3.0 events per prosthesis during the first year. In the milled bar with Locator attachment and Locator attachment groups, the average frequencies were 1.45 events and 2.35 events, respectively. Statistically significant differences were observed in the frequency of the complication. (p = .043) Conclusions. Compared to the bar-clip attachment, implant overdentures that use milled bars with the Locator attachment have a significantly lower incidence of prosthetic complications in the first year of follow-up after placement.

• The Journal of Korean Medical History
• /
• v.22 no.2
• /
• pp.15-22
• /
• 2009

In this thesis, the emphasis is laid especially on the culture & structure of Huizhou Province, China as the prime mover of the specifically-regional Huizhou $X{\bar{i}}n^{\prime}{\bar{a}}n$ medicine. Huizhou was the home town & stronghold of Neo-coufucian masters Cheng-Zhu (Cheng brothers and Zhu-hsi)". The tradition of the region as "The arts province" resulted in the flourishing trend of nurturing prominent Confucian-doctors. The remarkable all round activities of Huizhou Merchants (新安商人 $X{\bar{i}}n^{\prime}{\bar{a}}nsh{\bar{a}}ngr{\acute{e}}n$), as the reigning power merchant at the period were the second mover of the Zeitgeist. Their nation-wide network all over China made it possible to gain valuable inlormation and access to news including the field of medicine in time. Some merchants actually have "abandoned their own jobs to become doctors of medicine". This Confucian-Merchant culture was one of intrinsic characteristics of Huizhou region, inducing "Pragmatic Scholarship". With the enlargement of the population of Confucian-tumed doctors and improvement of the societal status of doctors, the resultant occupational triad of local Confucian govemment officials, local $X{\bar{i}}n^{\prime}{\bar{a}}nsh{\bar{a}}ngr{\acute{e}}n$ merchants, and local doctors was established after the Middle-Ming Dynasty. Ultimately, the two prime movers of the concomitant development of medicine in the Province Huizhou in this study are concluded to be the synergy effects of the Neo-Confucian tradition and economic power of the prevalent Huizhou Merchants ($X{\bar{i}}n^{\prime}{\bar{a}}nsh{\bar{a}}ngr{\acute{e}}n$).

• Korean Journal of Construction Engineering and Management
• /
• v.5 no.5 s.21
• /
• pp.135-142
• /
• 2004

This paper proposes the CPM bar chart (CBC), a hybrid of the bar chart and the critical pad method (CPM). The CBC overcomes shortages of the fenced bar chart, while still keeping advantages. The fence with direction is applied instead of the broken fence, which triggers considerable problems to identify and apply in the fenced bar chart. In addition, the notorious task to find dummy activities is no longer required. Upon the benefits of simplicity in the bar chart and logical work sequence in the CPM network. the CBC provides a relatively easy way to create and understand a schedule, thus improving communication quality between project participants. With the advantages, the CBC can also be effectively applied to various scheduling techniques such as resource constrained scheduling, resource leveling, scheduling with activity split, delay impact analysis, etc.

• Journal of Industrial Technology
• /
• v.25 no.B
• /
• pp.171-174
• /
• 2005

In this paper, we propose a new data encoding algorithm for a two-dimensional bar code system. In general, the one-dimensional bar code is just a key which can access detailed information to the host computer database. But the two-dimensional bar code is a new technology which can obtain high density information without access to the host computer database. We implemented the encoding algorithm for Data Matrix bar code which is the most widely used among the many kinds of two-dimensional bar codes in the field of marking using Digital Signal Processor (TMS320C31). The performance of the proposed algorithm is verified by comparing the imprinted symbols on the steel surfaces with the codes which are decoded by a bar code reader.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1999.10a
• /
• pp.663-666
• /
• 1999

Ground Penetrating Radar (GPR) attached with 1 GHz center frequency antenna has been used to measure a dielectric constant of mortar, and to detect and locate a steel bar embedded inside laboratory size mortar specimens at various depth. Mortar specimens are made for the measurements with the dimensions of 100cm (width)$\times$100cm (length)$\times$14cm (depth). Each specimen has a 13mm diameter D13 steel bar at 2, 4, 6, 8, 10 and 12cm depth. In this paper, results of radar measurments are provided with a sample output, which successfully located the bar. It has been found that the reflected wave of the steel bar interacts with that of surface when the steel bar has the close distance to the surface.

• Proceedings of the Korea Society of Information Technology Applications Conference
• /
• 2005.11a
• /
• pp.65-68
• /
• 2005

In this paper, an algorithm to extract bar-space area is suggested. In a section of bar-code space area the threshold value is computed, and bar and space are extracted according to threshold value. PDF417 is used everyday life and printed in many different materials. The printed PDF417 is especially influenced by various light source. The decision of bar and space is very hard under the change of illumination. The fixed threshold value to distinguish the bar and space can not be applied. in these cases, The proposed algorithm is developed to investigate variable threshold. The variable threshold can be obtained by simple calculation.