• 한국구조물진단유지관리공학회 논문집
• /
• 제13권3호통권55호
• /
• pp.164-172
• /
• 2009

현수교는 주케이블이 목표하는 형상을 이루어 기하학적 강성을 갖도록 앵커, 새들과 같은 장치를 적용하고 있다. 지금까지의 연구에서는 두 장치를 모두 고정절점으로 단순화하여 해석하는 것이 일반적이었다. 그러나 새들의 경우 주케이블의 슬라이딩 현상이 발생할 수 있으며 이로 인하여 구조물의 응답이 달라진다. 특히 현수교의 시공단계 초기에 셋백로프를 철거하거나 셋백을 수행하지 않는 경우 새들 전후 주케이블의 장력 차이가 커지므로 슬라이딩이 발생하기 쉽다. 따라서 본 연구는 유한요소법을 이용한 케이블의 슬라이딩 해석방법을 제시하고 슬라이딩을 고려한 현수교의 시공단계별 해석을 수행하여 슬라이딩을 고려하지 않은 해석결과와 차이를 분석하였다. 슬라이딩을 고려한 해석을 통해 얻어진 결과는 구조물에 불리한 응답을 나타낼 수 있으므로 주케이블과 새들 사이의 슬라이딩을 고려한 해석은 필수적이다. 또한 본 연구의 슬라이딩 해석방법 및 해석결과는 이후 현수교의 설계와 시공시의 참고자료로 활용될 수 있다.

• 척추신경추나의학회지
• /
• 제10권1호
• /
• pp.47-61
• /
• 2015

Objectives : The purpose of this study is body parameters characteristics through posture analysis system of musculoskeletal problem patient Methods : Posture analysis system were performed for 164 patients to measure body parameters such as Q-angle, body inclination, neck inclination, PCMT(posterior cervical muscle tension), Knee flexion and posture balance. Statistical analysis using statistical analysis techniques and Pearson correlation coefficients was performed to assess the body parameters obtained by posture analysis system. Results : More than half of people out of 164 reported low back pain, 34.8% of the total was found to have neck pain. There was not a significant difference between genders from the characteristics of gender based body parameters expect for the statistical difference in Q angle, PCMT. There was a significant correlation between low back pain and multiple response status. There was a significant correlations between knee pain and Q angle. Also There was a significant correlations between pelvic pain and posture balance of ankle. Conclusions : Posture analysis system can be used to perform the analysis in place of X-ray measuring body posture and clinical parameters. The results of this study are expected to be the basis for further research on the clinical application of posture analysis system.

• Korean Journal of Acupuncture
• /
• 제30권1호
• /
• pp.21-26
• /
• 2013

Objectives : The purpose is to introduce the recent large-scale clinical researches for safety, efficacy and effectiveness of acupuncture in Germany. Results : In 2000, the German Federal Committee of Physicians and Health insurer proposed that large research initiatives on acupuncture, Acupuncture Model Projects(Modellvorhaben Akupunktur), could be conducted by health insurance companies for several pain that acupuncture is syndromes to justify the insurance-based reimbursement. Accordingly, 4 clinical researches were carried out; the Acupuncture Safety and Health economics studies(ASH), the Acupuncture Randomised Trial(ART), the Acupuncture in Routine Care studies(ARC), and the German Acupuncture trial(GERAC). Meanwhile, ASH is a prospective observational study for safety and costs. ART and GERAC are composed of RCTs for efficacy. ARC includes 6 pragmatic RCTs with additional non-randomized cohort study for effectiveness. We investigated the papers related to them and discussed about the outcomes. The researches showed that acupuncture is effective in practice for several chronic conditions such as migraine, tension-type headache, chronic low back pain, osteoarthritis of knee, dysmenorrhea, and allergic rhinitis. Based in part on them, the German health authorities decided that acupuncture would be included into routine reimbursement by social health insurance funds for chronic low back pain and chronic osteoarthritis of the knee in 2006. Conclusions : The German clinical researches may suggest the clues for establishing the evidence of acupuncture treatment.

• 대한약침학회지
• /
• 제3권2호
• /
• pp.1-25
• /
• 2000

We were trying to study the validity of Puffer fish's poison(Tetrodotoxin- TTX) to make a traditional Korean Medical treatment. The following conclusions were made after literary studies. 1. The first record of the puffer fish dates back 2000 years ago in the Chinese text Book of Mountain and Sea and other texts from the similar period. 2. Puffer fish's poison IS known as tetrodotoxin which is an amino perhydroquinazoline compound. It has a chemical formula of $C_{11}H_{17}N_3O_8$ in the hemiacetal structure and has the molecular weight of 319. 3. Tetrodotoxin (TTX) plays a role as potent neurotransmitter blocker by blocking the $Na^+$ -gate channel which hinders the influx of $Na^+$ ion into the cell. 4. Symptoms of the puffer fish poisoning ranges from blunted sense in the lips and tongue, occasional vomiting in the first degree to sudden descending of the blood pressure, apnea, and other critical conditions in the fourth degree. Intoxication of the puffer fish poison progresses at a rapid pace as death may occur after an hour and half up to eight hours in maximum. Typical death occurs after four to six hours. 5. Ways to treat the puffer fish poisoning include gastric irrigation, induce vomiting, purgation, intravenous fluid injection, and correcting electrolytic imbalance and acidosis. In cases of dyspnea, apply oxygen inhalation and conduct artificial respiration. 6. Tetrodotoxin (TTX) may be applied in treating brain disorders, ocular pain, excess pain in the large intestine and ileum, and relieving tension of the skeletal museles, neuralgia, rheumatism, arthritis, and etc. 7. In terms of Oriental medicine, the puffer fish poison has characteristics of sweet, warm, and poisonous. It's known efficacies are to tonify weakness, dispel damp, benefit the lower back, relieve hemorrhoid, kills parasites, remove edema, and so forth. And the puffer fish eggs processed with ginger are said to be effective against tuberculosis and lung cancer, thus, it's validity must be investigated and further research should be followed.

• 한국지반공학회지:지반
• /
• 제2권3호
• /
• pp.51-66
• /
• 1986

본 연구는 재래식 옹벽의 단점을 보완하여 skin element로써 간단한 L-type concrete block을 사용하고 reinforcing strip재로써 plastic fabric strip를 이용하며, back fill재는 우리 주위에서 흔히 접하는 나강암풍화토를 사용하여 만든 보강벽체를 통하여 몇가지 실험을 한 결과 이들 서반재료의 특성을 발안하여 개발된 이론식에 의하여 결정한 벽체의 보강은 삽입한 strip의 간격, 층수, 뒷채움 재의 입도분포, 다짐상태 및 strip의 인장강맥에 좌우되며 본보강옹벽체는 구조적으로 안정하고 경제적인 시공이 가능함이 확인되었으며 우리나라 특히 강원도와 같은 유간지역에서는 보다 효과적으로 이용될 수 있을 것으로 판단된다.

• 동국한의학연구소논문집
• /
• 제8권2호
• /
• pp.155-173
• /
• 2000

한의학의 진단(診斷)에는 망(望) 문(聞) 문(問) 절(切)의 사진법(四診法)과 여러 가지의 변증체계(辨證體系), 즉 기혈진액변증(氣血津液辨證) 장부변증(臟腑辨證), 육경변증(六經辨證), 위기영혈변증(衛氣營血辨證), 삼초변증(三焦辨證), 사상체질변증(四象體質辨證) 등이 응용되어 지고 있으며, 또한 그와 더불어 병상(症狀) 증후감병진단법(證候鑑別診斷法)등이 선택적으로 활용되어 지고 있다. 이러한 광범위(廣範位)한 진단방법(診斷方法)가운데 절진(切診)은 손가락 및 손바닥의 감각(感覺)을 운용(運用)해서 일정부위(一定部位)를 촉지(觸指), 접압(接壓)하는 검사방법(檢査方法)으로써 절맥진(切脈診)과 접진(接診)으로 크게 나눌 수 있다. 이중 안진(按診)이란 손을 사용하여 직접 환부에 촉모(觸摸) 안압(按壓)하여 이상변화를 알아내고 나아가서는 질병(疾病)의 부위(部位)와 성질(性質)과 병정(病情)의 경중(輕重) 등의 내부(內部)의 변화(變化)와 체표(體表)의 반응(反應)을 관찰(觀察)하여 중요(重要)한 변증자료(辨證資料)를 얻는 진단방법(診斷方法)의 한 종류(種類)를 말한다. 또한 접진(接診)에는 안기표(按肌表), 접수족(接手足), 안흉복(按胸腹), 접유혈진법(接兪穴診法)등을 들 수 있다. 배유혈(背兪穴)의 진단법(診斷法)은 경기(經綺)이라는 반응로(反應路)를 통(通)하여 체표(體表)에 발현(發現)되는 압통(壓痛), 자발통(自發痛), 긴장(緊張), 이완(弛緩), 경결(硬結) 및 조색상물(條索狀物) 등의 현상(現象)으로 부터 내부장기(內部臟器)의 병변(病變)을 진단(診斷)하는 방법(方法)이다. 이에 저자(著者)는 접진(接診)의 내용(內容)과 방법(方法)을 연구하면서 십이경맥(十二經脈)의 시동병(始動病) 소생병(所生病)을 알아보고 혈위진단(穴位診斷)의 방법(方法) 및 주의점(注意點)등을 아울러 정리하므로써 다음과 같은 결론(結論)을 얻었다. 1. 유혈(兪穴)은 각(各) 장부(臟腑)의 사기(邪氣)가 주입(注入)하는 곳으로 장병(臟病) 한증(寒症) 허증(虛症)의 의미를 내포한 음성병증(陰性病症) 치료(治療)에 중요(重要)한 곳이다. 2. 유차(兪次)의 촉진(觸診) 즉(卽) 모지(母指)로서 척추극돌기(脊椎棘突起) 좌우측(左右側)을 접압(接壓)하여서 상향(上向)이나 하향(下向)으로 추압지(推壓指)하면 극돌기(棘突起)의 돌(突), 함요(陷凹), 긴장(緊張), 이완(弛緩) 및 압통(壓痛)의 출현부위(出現部位)에 따라 계통별(系統別) 질환(疾患)을 판단(判斷)할 수 있다. 3. 실제(實際) 임상(臨床)에서 환자(患者)의 진단(診斷) 치료(治療)에 있어서 배부접진(背部接診)은 중요(重要)한 진단(診斷)의 한 영역(領域)으로 빠뜨리지 말고 꼭 참고(參考)하여야 할 것으로 사료(思料)된다. 4. 장부질환(臟腑疾患)에 대한 진단방법(診斷方法)의 다양화(多樣化)와 치료영역(治療領域)의 확대(擴大) 및 치료율(治療率)의 상승(上昇)을 위해 배부유혈(背部兪穴)의 정확(正確)한 인식(認識)과 유혈접진(兪穴接診)을 통하여 정확(正確)한 진단(診斷)이 되었으면 한다.

• 한국강구조학회 논문집
• /
• 제16권3호통권70호
• /
• pp.345-353
• /
• 2004

대공간 구조물의 중요한 문제중의 하나는 지붕 구조물의 자중을 극복하는데 있다. 이 문제는 인장부재를 효과적으로 사용함으로서 해결할 수 가 있다. 이러한 면에서 텐세그러티 구조시스템인 케이블 돔 구조물은 대공간을 구성하는데 효과적으로 사용되고 있다. 그러나 케이블 돔 구조시스템은 외력의 증가에 따라 전체좌굴의 위험성을 가진다. 본 연구는 케이블 돔 구조물인 Geiger형과 Flower형을 대상으로 초기장력 작용에 의한 형상문제를 해결하고 축대칭 하중 재하시 완전형상과 초기형상불완전을 가지는 형상에서의 불안정 현상을 파악한다.

• 한국정밀공학회지
• /
• 제30권6호
• /
• pp.629-637
• /
• 2013

In this study, a theoretical analysis method was suggested for predicting forming loads of continuous deep drawing and ironing processes (D.D.I. processes) by considering back tension and continuity equation, and FEA for D.D.I. processes was performed. Dimensions of a punch and a mold on the basis of design rules for a CNG storage vessel were applied for the analysis. To verify the suggested theoretical analysis, the results of theoretical analysis were compared with both those of FEA and experiments of previous studies. As the result of analysis, the values and tendencies of the loads predicted by the theoretical analysis were in agreement with those of FEA and the experiments. So, it is considered that the analysis suggested has reliability for predicting the forming loads of the continuous processes(deep drawing+ironing(1)+ironing(2)).

• 대한치과교정학회지
• /
• 제24권3호
• /
• pp.709-719
• /
• 1994

The aim of this investigation was to identify which suing is more suitable for uprighting of the 30 degree inclined lower second molar in different situations. Between four different molar uprighting springs which were A, B, C type and T-loop spring, the author tested T-loop suing as a control material and the other springs were experimental group. Each spring was fabricated from .017' $\times$ .025' TMA wire and preactivated with 40 degree tip-back bend. Stabilizing unit included from the lower right central incisor to the lower right second premolar which were made by acrylic resin. The photoelastic overview of the lower right quadrant showed that stress concentrations were observed in its photoelastic model. The obtained results were as follows. 1. Higher concentration of compression can be seen clearly at the distal curvature than the mesial of the lower second molar when A type uprighting spring was applied, which can be used as a space regainer. 2. Higher level compression was presented at the mesial root apex area than the distal of the lower second molar in B type uprighting spring, which can be used as a space closer. 3. Areas of higher compression and tension were observed about the mesial and distal root of the lower second moalr than A and B type in C type uprighting spring, which can be used as a partial space regainer.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2002년도 춘계학술대회 논문집
• /
• pp.631-636
• /
• 2002

The purpose of this study was to present the method to choose the optimization machining condition for the wire electric machine. This was completed by examining the ever- changing quality of the material and by improving the function of the wire electric discharge machine. Precision metal mold products and the unmanned wire electric discharge machining system were used and then applied in industrial fields. This experiment uses the wire electric discharge machine with brass wire electrode of 0.25mm. To measure the precision of the machining surface, average values are obtained from 3 samples of measures of center-line average roughness by using a third dimension gauge and a stylus surface roughness gauge. In this experiment, we changed no-node voltage to 7 and 9, pulse-on-time to $6\mu\textrm{s}$, $8\mu\textrm{s}$ and $10\mu\textrm{s}$, pulse-off-time to $8\mu\textrm{s}$, $10\mu\textrm{s}$ and $13\mu\textrm{s}$, and experimented on wire tension at room temperature by 1000gf, 1200gf, and 1400gf, respectively