Browse > Article
http://dx.doi.org/10.7736/KSPE.2013.30.6.629

A Study on D.D.I. Load for Forming of the CNG Storage Vessel  

Lee, Hyun Woo (Creative Engineering System, Pusan National Univ.)
Bae, Jun Ho (School of Mechanical Engineering, Pusan National Univ.)
Kim, Chul (Research Institute of Mechanical Technology, Pusan National Univ.)
Publication Information
Journal of the Korean Society for Precision Engineering / v.30, no.6, 2013 , pp. 629-637 More about this Journal
Abstract
In this study, a theoretical analysis method was suggested for predicting forming loads of continuous deep drawing and ironing processes (D.D.I. processes) by considering back tension and continuity equation, and FEA for D.D.I. processes was performed. Dimensions of a punch and a mold on the basis of design rules for a CNG storage vessel were applied for the analysis. To verify the suggested theoretical analysis, the results of theoretical analysis were compared with both those of FEA and experiments of previous studies. As the result of analysis, the values and tendencies of the loads predicted by the theoretical analysis were in agreement with those of FEA and the experiments. So, it is considered that the analysis suggested has reliability for predicting the forming loads of the continuous processes(deep drawing+ironing(1)+ironing(2)).
Keywords
D.D.I.; Compressed Natural Gas; Fuel Storage Vessel; Load; Forming; F.E. Analysis;
Citations & Related Records
Times Cited By KSCI : 2  (Citation Analysis)
연도 인용수 순위
1 Yoon, J. H., Jung, S. Y., Choi, Y., Kim, C., and Choi, J. C., "A Study on the Development of Computer- Aided Process Planning System for the Deep Drawing & Ironing of High Pressure Gas Cylinder," J. Korean Soc. Precis. Eng., Vol.19, No. 2, pp. 177-186, 2002.   과학기술학회마을
2 Choi, J. C., Kim, C., Choi, Y., Yoon, J. H., "Process Planning and Die Design for the Deep Drawing &Ironing of high pressure gas cylinder," Proc. of KSPE Spring Conference, pp. 138-143, 2000.
3 Brochure of Fielding Co. Ltd, U.K, 1998.
4 Jung, S. Y., "Development of Computer-Aided Process Design System for Deep Drawing & Ironing of High Pressure Gas Cylinder," M.Sc. thesis, Dept. of Precision Mechanical Engineering, Pusan National University, 2000.
5 Yoon, J. H., "Development of a Computer Aided Process Planning & Die Design System for the Deep Drawing & Ironing of High Pressure Gas Cylinder," Ph.D. thesis, Dept. of Precision Mechanical Engineering, Pusan National University, 2003.
6 Kim, E. S., Kim, J. H., Park, Y. S., Kim, C., and Choi J. C., "Development of an Automated Design System of CNG Composite Vessel using Steel Liner Manufactured by D.D.I. Process," J. Korean Soc. Precis. Eng., Vol. 20, No. 1, pp. 205-213, 2003.   과학기술학회마을
7 Lee, H. W., "A Study on the Hot Spinning & D.D.I. Process for CNG High Pressure Storage Vessel(TypeII)," Ph.D. thesis, Creative Engineering System, Pusan National University, 2013.
8 Shim, H. B. and Yang, D. Y., "Elastic-Plastic Finite Element Analysis of Deep Drawings of Circular and Square Cups Considering Bending," Trans. of the KSME, Vol. 18, No. 7, pp. 1738-1750, 1994.   과학기술학회마을