• Journal of the Korean Institute of Landscape Architecture
• /
• v.42 no.5
• /
• pp.101-109
• /
• 2014

In order to save costs and enhance quality in construction without damaging the environment, the VE/LCC analysis method is increasingly used. This study was carried out to conduct a value analysis for the ecological restoration of a slope considering life cycle cost and performance. The construction conditions were classified into three types(A, B, C) according to the condition of each base. Three construction methods for slope ecological restoration were selected by each condition. Eventually, a value analysis was conducted for total nine conditions by analyzing the life cycle cost and performance. The gradient of slope and base of Condition 1 were below 1:1.2 and general soil, while condition 2 and 3 were below 1:1.0(reaping rock) and below 1:0.7(soft rock, blasted rock), respectively. A value analysis was conducted based on the value estimated via life cycle cost and performance analysis. The result showed that the B construction method had the highest value in Condition 1 as it showed 108.4, while A and C showed 90.3 and 45.8, respectively. When it comes to Condition 2, Construction Method A indicated the highest value as it showed 89.1(B: 47.5, C: 47.0). In Condition 3, Construction Method A(89.1) was the highest, while B and C showed 55.4 and 40.2, respectively. Based on the result of this study, in order to make a reasonable decision that can enhance quality and reduce costs in slope ecological restoration, the slope ecological restoration method must be reviewed in consideration of life cycle cost and performance.

• Journal of Animal Environmental Science
• /
• v.17 no.sup
• /
• pp.61-68
• /
• 2011

To assess the total cost with all stages of facilities, the feasibility of Life Cycle Cost (LCC) analysis was examined in this study to estimate the livestock manure treatment system and optimal decision making process. For the economic evaluation, the plant/equipment investment and annual operation cost of four Public Livestock Recycling Facilities, whose treatment capacity is 100 ton piggery manure per day, was compared. The initial cost was in the range of 2,699 million won to 3,202 million won, where T and E methods were highest and lowest, respectively. The annual operation cost was in the level of 378 million to 498 million won, which decreased in the following order : T method > J method > E method > B method. For the LCC analysis, 4.7% of interest rate, 3.13% of inflation rate, and 1.52% of net discount rate was considered by the data received from Bank of Korea and Statics Korea in the period of 2000 to 2009. Also, for the calculation of present value factor, the durable years of civil engineering & construction, machinery and electric instrument was 30 years, 10 years and 15 years, respectively. Based on these consideration, operation cost was in the range of 17,570 won/ton to 20,661 won/ton, and E method (17,570 won/ton) was economical and B method (20,661 won/ton) was non-economical. Though initial cost of T method was higher than that of B method, LCC analysis of T method was lower than that of T method due to the lower operation cost. Therefore, LCC analysis, which considers both initial cost and operation cost, is more reasonable evaluation method than either initial cost or annual operation cost. For the change of LCC analysis according to the uncertainty, the sensitivity analysis was carried out using fluctuation magnitude of discount rate in the period of 2000 to 2009. As a result, LCC analysis evaluated by discount rate was stable for the uncertain factors since the cost leadership did not change even though the sensitivity analysis varied. In summary, the economic evaluation using LCC analysis could be an efficient reference to choose the suitable livestock manure treatment plants. Furthermore, standardization of statement calculation for the actual cost analysis should be conducted and more detailed study is necessary to validate this summary. Therefore, the application of comprehensive technology evaluation, which considers LCC analysis, should contribute in obtaining objectivity and enhancing reliability for the 'Evaluation of Livestock Manure Treatment System and its Technology'.

• Korean Journal of Microbiology
• /
• v.37 no.3
• /
• pp.209-213
• /
• 2001

By FISH and spore staining methods, the changes of Bacillus spp. numbers were investigated at municipal waste water treatment system, which operated with B3 process. Total bacterial numbers, which is the sum ofDAPI bound cells and numbers of spore, were ranged TEX>$3.2{\times}10^8 ~ 4.4{\times}10^8 $ cells/ml. The Bacilli numbers whichis the sum of probe S-G-Bacill-0597-a-A-22 bound cells and numbers of spore were from $0.3{\times}10^7 ~ 8.4{\times}10^7 $ cells/ml. The ratios of Bacillus sp. to total bacteria were ranged from 8 to 60%. Among 4 aeration tanks, thefirst tank had shown the highest proportions of Bacillus sp. And third and fourth tanks, the numbers of sporewere increasing.

• Journal of Korean Society of Environmental Engineers
• /
• v.35 no.10
• /
• pp.756-762
• /
• 2013

The economical feasibility was conducted to find the adequate method to treat the dredged sediments from agricultural reservoirs in a pilot project that had been operated to improve the quality of water and benthic environments by dredging of contaminated sediments. For benefit/cost (B/C) analysis, the net expenses were considered as the costs of project, and the benefits were calculated from the saving of waste-treatment cost through reuse of dredged sediment, the saving of construction cost of settling pond, and the values of retained water by dredging. Although the economic feasibility depended on the sites of operation, the average B/C value of the pilot project was estimated as 1.32, indicating this project is economically feasible. Depending on the treatment methods, the B/C values were in the order of the methods of coagulating sedimentation, machinery dewatering, stabilization through exothermic reaction, and soil improvement and stabilization. The machinery dewatering method is estimated as the most adequate one to treat the dredged sediments because of the minimum riskiness of secondary pollution, the recyclability, and its economic feasibility.

• Journal of Korean Society of Water and Wastewater
• /
• v.24 no.4
• /
• pp.407-412
• /
• 2010

The purpose of this study was to investigate removal efficiencies of contaminants in night soil treatment plant using the B3 system. The samples were collected from retaining tank and settlement tank in Yechon night soil plant. We experimented concentrations of BOD, COD, SS, TN and TP. Concentration data were processed using removal efficiencies by season and correlation analysis with pilot running parameters. Removal efficiencies of total organic carbon was over 96%, TN was 98% during summer, 80.9% during winter. In the case of TP, the highest removal efficiencies was 94.1% during fall and the lowest removal efficiencies was 82% during spring. Results of correlation analysis showed two positive correlation groups and one negative group. Positive correlations were among temperature, BOD and TN. The others were pH, BOD, COD, SS, TN and TP. Negative correlation were among MLSS, BOD, COD, SS, TN, TP.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2009.05a
• /
• pp.479-484
• /
• 2009

우리나라에서 많은 하천정비사업이 이루어지고 있으며 하천정비사업을 위해 하천설계가 실시되고 있다. 하천설계시 호안 설계가 중요한 비중을 차지하고 있으나 현재까지 설계된 사업에서 적절한 호안공법이 선정되었는지는 검증이 되지 않고 있다. 따라서 하천설계에 적용된 호안공법의 적합성을 평가할 필요가 있으며, 이에 따라 본 연구에서는 자연형 하천설계에 적용된 호안공법의 적합성을 평가하였다. 평가방법은 편익(B)/비용(C)방법을 사용하였다. 편익평가방법은 기존의 호안을 평가하는데 사용되는 방법을 기본으로하여 약간의 수정을 가하여 사용하였다. 평가항목은 수리적안정성, 환경생태성, 어메너티의 항목으로 되어 있고 각 항목은 몇 개의 소항목으로 구성되어 각 항목별로 평가점수를 부여한다. 다음 하천의 위치에 따라 도시, 농촌, 산지로 분류하여 위치별 가중치를 도입한다. 편익을 하천위치에 따라 3가지 항목평가 점수와 가중치를 곱한 값을 더하여 산정하였다. 비용은 호안시공비와 재료비의 합으로 산정하고 5단계로 등급을 나누었다. 최종적으로 계산된 편익과 비용을 이용하여 호안의 경제성을 평가하였다. 평가에 이용된 하천은 하천분류별로 각각 몇 개씩 선정하였으며 하천보고서를 이용하여 평가하였다. 평가결과는 각 하천별로 점수화할 수 있으며 따라서 호안설계점수를 상대적으로 비교할 수 있다. 호안공법별로 평가한 결과 식생매트를 사용한 호안의 경제성이 가장 좋으며 방틀공법을 사용한 호안의 경제성이 가장 나쁜 것으로 나타났다. 본 연구의 평가방법은 호안을 설계할 때 가장 적절한 호안공법을 선정하는데 도움을 줄 수 있을 것이다.

• Computational Structural Engineering
• /
• v.12 no.3
• /
• pp.95-101
• /
• 1999

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.8 no.3
• /
• pp.627-631
• /
• 2007

The factors affecting on sludge sedimentation are reported as F/M ratio, ingredient, composition of influent substrate, dissolved oxygen concentration, temperature, pH, filamentous bacteria and SRT. Aeration tank applying Bacillus sp. has an important role for maintaining the dominant microorganism species to make steady progress for spore growth affecting sedimentation. This research aims to investigate the affecting factor for the sedimentation in B3 system and RABC system with aeration tank applying tapered aeration. Extracellular polymeric substances(EPS), protein and carbohydrate can be produced for the extreme condition, that is down to 0.2 mg/L of dissolved oxygen in the aeration tank. This research found out the relation between the sedimentation and the EPS production, especially the ratio of protein/carbohydrate. The spore of Bacillus sp. was formed at the low DO then microorganisms produced EPS. The results showed that the production of EPS was 109.95 mgEPS/gSS at 1.6 mg/L of DO, however it was 131.77 mgEPS/gSS at 0.5 mg/L of DO. The sedimentation was affected by protein content in EPS and the ratio of protein and carbohydrate. The settleability of sludge was not affected by the ratio of protein/carbohydrate in B3 process, meanwhile settleability was affected by the ratio of it in RABC process, respectively.

• Proceedings of the Korean Institute of Industrial Safety Conference
• /
• 2005.04a
• /
• pp.264-269
• /
• 2005

• International Journal of Highway Engineering
• /
• v.8 no.3 s.29
• /
• pp.77-88
• /
• 2006

The maintenance / repair of concrete pavements has become an issue as a result of increasing of concrete pavements' service year. Asphalt overlay is applied to the concrete pavements after partial repairs on all occasions. This thesis discusses the application standard, evenness, skid resistance, noise, economical efficiency, extension of life span, etc. of diamond grinding, a method of maintenance about concrete pavements. Based on this, it was applied to the field and measured the performance. It was measured the longitudinal evenness of before and after the construction through measurement equipment. and surveyed the skid resistance the each lane classified using the SN standard value. In case of noise, it is selected the kind of vehicle, velocity, then measured the noise between control and constructed site. In addition, it is evaluated the average texture depth. As a result of the analysis, longitudinal evenness is improved about $6{\sim}40%$, skid resistance is improved 66% at first section,37% at second section. Noise is reduced 3.4dB average, and average texture depth is 79% deeper than control section. Therefore, it can be concluded that diamond grinding is suitable as maintenance / repair method of concrete pavements.