• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.11 no.1
• /
• pp.20-26
• /
• 2001

Titanium boride ($\textrn{TiB}_{x}$) films were deposited on (100) silicon substrates at the substrate temperature of $500^{\circ}C$ by means of the co-evaporation of titanium and boron evaporants during deposition. The co-evaporation method makes it possible to deposit the non-stoichiometric films with different boron-to-titanium ratio($0{\le}B/Ti \le 2.5$). The resistivity increases linearly as the boron-to-titanium ratio in the as-deposited films is increased. The surface roughness of $\textrn{TiB}_{x}$ films is changed as a function of the boron-to-titanium ratio. The XRD spectrum for pure titanium film shows a highly (002) preferred orientation. For B/Ti=0.59 ratio only a single TiB phase that shows a (111) preferred orientation is observed. However, the $\textrn{TiB}_{x}$ phase with the hexagonal structure of the $AlB_2$(C32) type appears as the boron concentration increase, and only a single $\textrn{TiB}_{x}$ phase is observed for $B/Ti \ge 2.0$ ratio. The $\textrn{TiB}_{x}$/Si samples reveal a tensile stress (3~$20{\times}^9$dyn/$\textrm{cm}^2$) in the overall composition of the films, although the magnitude of the residual stresses is depended on the nominal B/Ti ratio.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.20 no.1
• /
• pp.35-42
• /
• 2010

In this paper, three types of CNT/$TiO_2$ composite electrodes were prepared with different methods. The changes in XRD patterns showed that the Electrode A contained a mixed phase of anatase and rutile while the Electrode B and Electrode C contained a typical single and clear anatase crystal structure. From SEM micrographs, $TiO_2$ particles were adhered on the surface of the CNT network in the forms of small clusters. The results of chemical elemental analysis indicated that the main elements such as C, O and Ti were existed. The results demonstrated that the efficiency of photoelectrocatalytic (PEC) oxidation for methylene blue (MB) was higher than that of photocatalytic (PC) oxidation. There was a clear enhancement trend of the MB degradation using the prepared CNT/$TiO_2$ composite electrodes with an increase of applied potential. Finally, the prominent PEC activities of the CNT/$TiO_2$ composites could be attributed to combination effects of photo-degradation of $TiO_2$, electron assistant of CNT and function of applied potential.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.25 no.4
• /
• pp.153-159
• /
• 2015

Inorganic pigments have been received a great attention for various applications including paint, glazed ceramic ink, art tile, and building exterior due to their excellent thermal and chemical stability. Traditionally, the compositions of $PbCrO_4$, CdS and CdSe have been widely used as a yellow inorganic pigment. However, the use of these compositions has been restricted in recent years, because they contain harmful elements such as Cd, Cr, Pb and Se. In this study, new environment-friendly ceria-based pigment was synthesized using solid state reaction. Crystal structure and morphology of the obtained $Ce_{1-x}Zr_xBi_yO_{2-y/2}$ yellow pigment were analyzed using XRD and SEM, respectively. Substitutional effect of Zr and Bi on the pigment color was analyzed using UV-vis. spectrophotometer and CIE $L^*a^*b^*$ analysis. The crystal structure of the obtained pigments was dependent on the calcination temperature. The color characteristics and absorption band of the pigments were dependent on the calcination temperature and Zr, Bi contents. As a result, all the obtained yellow pigments showed the effective absorption ranged from ultraviolet to visible light, and $Ce_{0.44}Zr_{0.36}Bi_{0.20}O_{0.19}$ (x = 0.36, y = 0.20) pigment showed the most brilliant yellow color.

• Journal of the Korean Ceramic Society
• /
• v.23 no.2
• /
• pp.13-20
• /
• 1986

Composite polycrystals including ${\gamma}$-$6Bi_2O_3$.$SiO_2$ crystal which have needlelike regular structure are useful for the high resolution optical devices. For the purpose of obtaining the composite polycrystals described above the melts of eutectic composition in the three eutectic systems including $6Bi_2O_3$.$SiO_2$ composition were unidirectionally solidified at a rate of 0.05 and 0.25 cm/h under a thermal gradient of 10$0^{\circ}C$/m. Composite polycrystals of relatively regular structure in which needlelike ${\gamma}$-$6Bi_2O_3$.$SiO_2$ crystals were arrayed in parallel with $2Bi_2O_3$.$B_2O_3$ crystal matrix were obtained when the eutectic melt of $6Bi_2O_3$.$SiO_2 -2Bi_2O_3$.$B_2O_3$ system was solidified at a rate of 0.25 cm/h. Partial structural irregularity however was found in the obtained composite polycrystals.

• Bulletin of the Korean Chemical Society
• /
• v.10 no.2
• /
• pp.177-184
• /
• 1989

The structure of cholesteryl isobutyrate, $(CH_3)_2CHCOOC_{27}H_{45}$, was determined by single crystal X-ray diffraction methods. Cholesteryl isobutyrate crystallized monoclinic space group $P2_1$, with a = 15.115 (8)${\AA}$, b = 9.636 (5)${\AA}$, c = 20.224 (9)${\AA}$, ${\beta}$ = 93.15 (5)$^{\circ}$, z = 4, $D_c = 1.03 g/cm^3 $and Dm= 1.04 g/$cm^3$. The intensity data were measured for the 3417 reflections, within $sin{\theta}/{\lambda} = 0.59{\AA}^{-1}$, using an automatic four-circle diffractometer and graphite monochromated Mo-$K_{\alpha}$ radiation. The structure was solved by fragment search Patterson methods and direct methods and refined by full-matrix least-squares methods. The final R factor was 0.129 for 2984 observed reflections. The two symmetry-independent molecules (A) and (B) are almost fully extended. The molecules are in antiparallel array forming monolayers with thickness $d_{100}$ = 15.2${\AA}$, and molecular long axes are nearly parallel to the [$\bar{1}$01] directions. The two distinct molecules form separate stacks with almost the same orientations, but with differing degrees of steroid overlap. Thers is a close packing of cholesteryl groups within the monolayers. The packing type is similar to those of cholesteryl hexanoate and cholesteryl oleate.

• Journal of the Korean Chemical Society
• /
• v.20 no.1
• /
• pp.3-14
• /
• 1976

The crystal structure of alicylaldehyde-4-piperidinothiosemicarbazone, $C_{13}H_{l7}N_3OS$, has been determined by single crystal X-ray analysis. The crystals are orthorhombic, space group $P2_12_12_1$, with unit cell dimensions a = 6.52(2), b = 13.42(4), c = 14.92(4)${\AA}$. There are four formular units in a unit cell. The structure was solved by the heavy atom method and refined by isotropic block diagonal least-squares methods to a final R value of 0.10 for 1019 observed reflections. The oxygen atom of the hydroxyl group is involved in two hydrogen bonds, one as donor in the intramolecular O-H${\cdots}$N hydrogen bond and the other as acceptor in the intermolecular N-H${\cdots}$O hydrogen bond, the distances of the hydrogen bonds 2.56 and 3.00${\AA}$ respectively.The molecules are joined into infinite columns by the N-H${\cdots}o$O hydrogen bonds which form spirals along the two fold screw axis parallel to the a axis. The molecular columns are held together by van der Waals forces.

• Bulletin of the Korean Chemical Society
• /
• v.19 no.11
• /
• pp.1175-1179
• /
• 1998

The aerobic reaction of 2-(acetylpyridine)-S-methyldithiocarbazate (acpy-mdtcH) and 2-(acetylpyridine)-N-phenylthiosemicarbazate(acpy-phTscH) with manganese(Ⅱ) acetate affords Mn(acpy-mdtc)2 and Mn(acpyphTsc)2, respectively. The spectroscopic data and X-ray structure of Mn(acpy-mdtc)2 are reported. Crystal data for Mn(acpy-mdtc)2; C18H20N6S4Mn, mol wt 503.58, monoclinic crystal system(P21/c) a=12.240(5) Å, b= 10.918(l) Å, c=17.651(3) Å, β=105.93(2), and V=2268(l) Å3, Z=4, 5071 data collected with 0°< 2θ < 52.64°, 2995 data with I > 3σ(I), R= 0.046, Rw= 0.065. The ligands act as tridentate NNS donors. The two Mn-S distances are not equal, and respectively 2.512(2) Å and 2.541(2) Å. The average Mn-N (azomethine) length, 2.242(5) Å, is slightly shorter than the average Mn-N (pyridyl) length, 2.262(5) Å. The coordination environment about MN(Ⅱ) center deviates considerably from octahedral geometry. The manganese(Ⅱ)-manganese(Ⅰ) and manganese(Ⅰ)-manganese(0) reduction potentials of Mn(acpy-mdtc)2 are ∼-l.71 and ∼-l.98 V while those of Mn(acpy-phTsc)2 are ∼-l.87 and ∼-2.11 V vs. Ag/Ag+ in dimethyl sulfoxide, respectively.

• Korean Journal of Crystallography
• /
• v.7 no.1
• /
• pp.20-29
• /
• 1996

Sr0.6Ca0.4CuO2 single crystal has been synthesized by flux method and characterized by the single crystal X-ray diffraction. The compound has the orthorhombic system and the space group is Cmcm(63), lattice parameters are a=3.4645Å, b=16.1417Å, c=3.8727Å. In the (Sr1-xCax)CuO2 compound the limit of Ca from substitution for Sr was determined by the change of bond length. For this, X-ray diffraction, scanning electron microscopy (SEM), energy dispersive X-ray fluorescence (EDAX) and electron probe micro-analysis (EPMA) were used. From the change of Cu-O bond length as the Ca substitution, we concluded the limit of Ca incorporation Xca≒0.73.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.25 no.12
• /
• pp.1869-1878
• /
• 2001

Experiments are carried out to investigate the effect of pulsations on the flow and heat transfer characteristics of an axisymmetric impinging jet on a flat plate heated by using a gold coated aim. Vertex motion in the impinging jet is visualized using a fog generator, and a thermochromatic liquid crystal (TLC) technique is used to measure the time averaged local temperature distributions on the impingement plate. In addition, the quantitative data for mean velocity and turbulence intensity are obtained employing hot-wire anemometer. Parameters such as pulsating frequency (f = 0, 10 and 20 Hz) and the nozzle-to-palate spacing (H/D = 2, 10) are considered at the jet Reynolds number of 20,000. Consequently, the significant changes of flow structure and local Nusselt number distribution due to pulsations are observed. In the case of H/D = 2, the enhanced heat transfer coefficient exceeding 30 % is observed at the stagnation point. At the high H/D, heat transfer rate increases with pulsation frequency.

• Korean Journal of Materials Research
• /
• v.21 no.9
• /
• pp.515-519
• /
• 2011

The purpose of this study was to determine the optimal firing condition and composition for $Al_2TiO_5$ crystal, which is suitable for stable coloration in glazes at high temperatures, using $Cr_2O_3$ as chromophore for the synthesis of $Al_2TiO_5$ system pigments. $Al_2TiO_5$ has a high refractive index and good solubility of chromophore in the $Al_2TiO_5$ lattice, making this structure a good candidate for the development of new ceramic pigments. Pigments were synthesized by using $Al_2O_3$ and $TiO_2$ mainly. Various amounts of $Cr_2O_3$ such as 0.01, 0.02, 0.03, 0.04 and 0.05 mole were also added. Each compound was synthesized at $1300^{\circ}C$, $1400^{\circ}C$, and $1500^{\circ}C$ for 2 hours and cooled naturally. The crystal structure, solubility limit, and color of the synthesized pigments were analyzed by XRD, SEM, Raman spectroscopy, UV and UV-vis. The changes in color as the result of applying 6 wt% of the synthesized pigments to lime barium glaze were expressed as CIE-L*a*b* values. A $Cr_2O_3$ 0.03 mole doped $Al_2TiO_5$ brown pigment was successfully synthesize at $1400^{\circ}C$, and the values of CIE-L*a*b* parameters were L* = 44.62, a* = 3.10, and b* = 17.25. In the case of the pigment synthesized at $1500^{\circ}C$, the brown color was obtained at 0.01 mole and 0.02 mole $Cr_2O_3$, and the CIE-L*a*b* values were 55.34, 1.73, 28.64, and 49.39, 0.51, 21.33, respectively. At $1500^{\circ}C$, the maximum limit of solid solution was 0.03 mole $Cr_2O_3$. The glazed sample showed green color, and the values of the CIEL* a*b* parameters were L* = 45.69, a* = -0.98, and b* = 20.38.