• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2011.03a
• /
• pp.54-54
• /
• 2011

방사 공정 최적화를 위해 칩(chip)건조를 실시하여 칩의 수분을 모두 제거한 후 실험을 진행하게 된다. 칩은 그 자체가 공정수분율(0.4%) 또는 그 이상의 수분을 함유하고 있으므로 건조하지 않고 방사하면 현저히 가수분해가 일어난다. 가수분해가 일어난다면 PET 분자량도 저하되어 고분자의 성질을 잃게 되어 방사된 섬유의 물리 화학적 성질에 중요한 영향을 받게 된다. 그러므로 가수분해를 방지하기 위하여 칩내 수분을 제거하는 건조 공정을 거치는 것이다. 개발된 나노은입자을 함유한 Ag/PET 마스터배치의 제사성 및 가연성 평가을 위한 파일럿연구를 행했다. 본 연구에서 사용한 은나노 M/B 칩(chip)의 경우 일반적으로 사용하는 PET 칩에 비하여 낮은 고유점도를 가지므로 방사성에 칩의 수분이 더욱 영향을 미칠 것이라 판단되어 건조공정에 특별한 주의을 하여 진행하였다. 마스터배치의 고유점도(IV)값의 변화에 따른 제사성 및 가연성 평가를 관찰하였다. #3 M/B 칩의 제사성이 #1 M/B 칩 대비 공정성이 개선되어 두 품종 모두 비출사가 발생하지 않았으며, M/B 제조시 분산제 유무에 따른 방사공정성의 차이는 없는 것으로 보인다. 따라서 #1 M/B 대비 공정성이 개선된 점은 M/B의 IV개선에 기인하는 것으로 판단되었다.

• Journal of Sasang Constitutional Medicine
• /
• v.16 no.1
• /
• pp.53-60
• /
• 2004

Purpose This study is to find the characteristics of voice quality based on the classifying the sound characteristics and B.M.I. by Sasang Constitution. Methods To make the notion of the consensus of Sasang Constitution's Voice, classification into 4 categories was made: clear/hoarse, high/low, powerful/powerless, fast/slow. Result The voice quality of Soyangin group was classified as powerful and fast, and that of Taeumin group was classified as powerful and hoarse and low, and that of Soeumin group was classified as powerless and clear. The mean B.M.I. of Soeumin group was classified as 21.4, and that of Taeumin group was classified as 26.3. Conclusion 1. Taeumin was significantly high compared with Soeumin in B.M.I. 2. It can be classified as Taeumin when B.M.I. is high(26.3). 3. It can be classified as Soeumin when B.M.I. is low(21.4). 4. The voice quality of Soyangin group was classified as clear and fast, or strong and clear, and that of Taeumin group as powerful and hoarse, and that of Soeumin group as powerless and low.

• Proceedings of the KIEE Conference
• /
• 1988.07a
• /
• pp.644-646
• /
• 1988

This paper has been aimed to develop M68020 Software Development System on a host computer 3B20S for the TDX-2 fully electronic Switching system by transporting M68020 C Cross Compiler. M68020 C Cross Compiler source code which includes assembler, run-time library and optimizer has been analyzed for the installation on the host computer 3B20S system. Moreover, the linkage editor source file has been analyzed and installed on the3B20S to produce the executable file correctly. Through these procedures, the M68020 object codes could be obtained on the 3B20S computer for the multi-using purposes. It has also been confirmed that the M68020 Software Development System on the 3B20S works correctly.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.24 no.10A
• /
• pp.1494-1500
• /
• 1999

In order to provide high speed multimedia data rate service, Multi-Code CDMA has been proposed which converts high speed serial data stream into N parallel low speed data streams with orthogonal PN codes for spreading. However this signal has multi level and causes interferences to be increased at the neighboring cell boundary in the reverse link. Therefore in order to solve the above mentioned problem, M/B-MC/CDMA, in which multi level signal is converted to binary level signal using M/B conversion, is proposed and the performance is compared with MC-CDMA.

• Korean Journal of Pharmacognosy
• /
• v.34 no.2 s.133
• /
• pp.142-144
• /
• 2003

Acetone extracts of 301 strains of marine-derived fungus were tested for antimicrobial activity against three strains of bacteria. The bacteria consisted of three pathogens, Staphylococcus aureus, methicillin-resistant S. Aureus, and multidrug-resistant S. aureus. The acetone extracts of 10 strains (MFA117, MFA130, MFA134, MFA206, MFA217, MFA268, MFA277, MFA291, MFA292, MFA301) showed strong activity, inhibiting 100% of the bacterial growth. These antimicrobial active strains were cultlued in SWS medium on a 1 L scale and the resulting broth and mycelium were extracted to afford mycelium extract (000M) and broth extract (000B), respectively. Antimicrobial activity for all extracts has been tested as the results, the mycelium extract of one strain (217M) and the broth extracts of 9 strains (117B,130B, 134B, 206B, 268B, 277B, 291B, 292B, 301B) exhibited relatively high levels of activity at minimal inhibitory concentration (MIC) values of $500-125\;{\mu}g/mL$ range. Among them, the extracts, 277B, 291B, 292B and 301B showed the most significant antimicrobial activity with $IC_{50}$ values of $125\;{\mu}g/mL$.

• Journal of Welding and Joining
• /
• v.20 no.6
• /
• pp.30-30
• /
• 2002

It has been reported that the creep characteristics on weldment which is composed of weld metal(W.M), fusion line(F.L), heat-affected zone(HAZ), and base meta(B.M) could be unpredictably changed in severe service conditions such as high temperature and high pressure. However, the studies done on creep damage in power plant components have been mostly conducted on B.M and not the creep properties of the localized microstructures in weldment have been thoroughly investigated yet. In this paper, it is investigated the creep characteristics for three microstructures like coarse-grain HAZ(CGHAZ), W.M, and B.M in X20CrMoV121 steel weldment by the small punch-creep-(SP-Creep) test using miniaturized specimen(l0×10×0.5mm). The W.M microstructure possesses the higher creep resistance and shows lower creep strain rate than the B.M and CGHAZ. In the lower creep load the highest creep strain rate is exhibited in CGHAZ, whereas in the higher creep load the B.M represents the high creep strain rate. The power law correlation for all microstructures exists between creep rate and creep load at 600℃. The values of creep load index (n) based on creep strain rate for B.M, CGHAZ, and W.M are 7.54, 4.23, and 5.06, respectively and CGHAZ which shows coarse grains owing to high welding heat has the lowest creep loade index. In all creep loads, the creep life for W.M shows the highest value.

• Journal of Welding and Joining
• /
• v.20 no.6
• /
• pp.754-761
• /
• 2002

It has been reported that the creep characteristics on weldment which is composed of weld metal(W.M), fusion line(F.L), heat-affected zone(HAZ), and base meta(B.M) could be unpredictably changed in severe service conditions such as high temperature and high pressure. However, the studies done on creep damage in power plant components have been mostly conducted on B.M and not the creep properties of the localized microstructures in weldment have been thoroughly investigated yet. In this paper, it is investigated the creep characteristics for three microstructures like coarse-grain HAZ(CGHAZ), W.M, and B.M in X20CrMoV121 steel weldment by the small punch-creep-(SP-Creep) test using miniaturized specimen($10{\times}10{\times}0.5mm$). The W.M microstructure possesses the higher creep resistance and shows lower creep strain rate than the B.M and CGHAZ. In the lower creep load the highest creep strain rate is exhibited in CGHAZ, whereas in the higher creep load the B.M represents the high creep strain rate. The power law correlation for all microstructures exists between creep rate and creep load at $600^{\circ}C$. The values of creep load index (n) based on creep strain rate for B.M, CGHAZ, and W.M are 7.54, 4.23, and 5.06, respectively and CGHAZ which shows coarse grains owing to high welding heat has the lowest creep loade index. In all creep loads, the creep life for W.M shows the highest value.

• Development and Reproduction
• /
• v.13 no.3
• /
• pp.155-161
• /
• 2009

It has been reported that ganglioside GT1b is expressed during neuronal cell differentiation from undifferentiated mouse embryonic stem cells (mESCs), which suggests that ganglioside GT1b has a direct effect on neuronal cell differentiation. Therefore, this study was conducted to evaluate the effect of exogenous addition of ganglioside GT1b to an in vitro model of neuronal cell differentiation from undifferentiated mESCs. The results revealed that a significant increase in the expression of ganglioside GT1b occurred during neuronal differentiation of undifferentiated mESCs. Next, we evaluated the effect of retinoic acid (RA) on GT1b-treated undifferentiated mESCs, which was found to lead to increased neuronal differentiation. Taken together, the results of this study suggest that ganglioside GT1b plays a crucial role in neuronal differentiation of mESCs.

• Korean Journal of Optics and Photonics
• /
• v.8 no.4
• /
• pp.327-332
• /
• 1997

We fabricated the high speed 1.55${\mu}{\textrm}{m}$ distributed feedback laser diodes (DFB-LD) using both two-step mesa etching process and semi-insulating InP current blocking layers. The devices characteristics were threshold current of ~15mA, slope efficiency of ~0.13mW/mA, and dynamic resistance of ~6.0Ω, with as-cleaved facets. The fabricated DFB-LD showed the single longitudinal mode with more than 40dB up to 6 $I_{th}$(CW condition), emitting at the wavelength of 0.546${\mu}{\textrm}{m}$. The -3dB bandwidth was >10㎓ at the driving current of 27mA, and the maximum -3dB bandwidth was ~18㎓ at 90 mA current, showing the superior frequency response of SI-PBH DFB-LD. In the 10Gb/s transmission experiment for 1.55${\mu}{\textrm}{m}$ DFB-LD module, maximum 10 km of single mode fiber(SMF) or 80 km of dispersion shifted fiber (DSF) could be transmitted with error free.

• Applied Biological Chemistry
• /
• v.29 no.3
• /
• pp.279-287
• /
• 1986

The changes in peroxidase activity and its isozyme pattern in the different parts of mung bean sprout were investigated; The enzyme activity in cotyledon and root showed a tendency to increase at an early stage and then decreased gradually as germination continued. However, the crude homogenate of epicotyl and hypocotyl showed a continuous decline in the enzyme activity. In particular, the enzyme activity of the root was $1.5{\sim}3.5$ times higher than that of other parts. Gel electrophoresis of the crude homogenate revealed that the number of isozyme in every part of the mung bean sprout increase during germination up to 6th days. Two isozymes from root were partially purified by ammonium sulfate fractionation, gel filtration by Sephadex G-75 and DEAE cellulose column chromatography. One of the isozymes (A) was purified 16-fold by the present procedure, but the purity of the other isosyme (B) was not increased , significantly. Isozyme A was the most active at $65^{\circ}C$ and isozyme B at $70^{\circ}C$, while both isozyme (A, B) have a optimal pH of 5.6. The Km values of isozyme A and B for 0-dianisidine as a hydrogen donor determined to be 0.071 mM and 0.052mM, respectively, and those for isozyme A and B using $H_2O_2$ as a hydrogen acceptor were 0.28mM and 0.23mM, respectively.