• Korean Journal of Food Science and Technology
• /
• v.29 no.2
• /
• pp.266-272
• /
• 1997

In order to investigate the compression and decompression properties of cucumber, radish, garlic, ginger and potato, edible parts of samples were prepared to size of ${\Phi}\;5\;mm{\times}H\;5\;mm$, and force deformation relationship during application and removal of force were observed. Compositions of sample and cell characteristics were measured, and correlations between them were investigated. Deformation rate was large in initial stage of compression and decreased afterward, but the reverse trends were observed in the decompression. The time and deformation to 9 N were large of 5.30 sec and 1.344 mm in potato, and small of 4.62 sec and 0.896 mm in garlic, respectively. Force(y)-deformation(x) curve between compression and decompression were clearly showed hysteresis loop and relationship of x and y were as follows: y=esp (a+b log(x)). The maximum work was $3.888{\sim}5.099{\times}10^{-3}\;J$ for potato in compression and $2.09{\times}10^{-3}\;J$ for garlic in decompression. Irrecoverable work were large as $77{\sim}96%$ in cucumber, radish and potato, and small as $36{\sim}42%$ in garlic. Compression deformation were large as $1.016{\sim}1.344\;mm$ in potato, and small as $0.656{\sim}0.896\;mm$ in garlic. Degree of elasticity were large as $0.756{\sim}0.777$ in garlic, and small as $0.301{\sim}0.465$ in radish and potato. Compression and decompression characteristic values were showed high correlation with moisture, viscosity of juice, ceil size, density and regularity.

• Journal of the Korean Magnetics Society
• /
• v.12 no.5
• /
• pp.184-188
• /
• 2002

The Cu/Ni/Cu(002)/Si(100) films which have perpendicular magnetic anisotropy were deposited by e-beam evaporation methods. From the reflection high energy electron diffraction pattern, the films were confirmed to be grown epitaxially on silicon. After 2X lots ions/$\textrm{cm}^2$ C+ irradiation, magnetic easy-axis was changed from surface normal to in-plane as shown in the hysteresis loop of magneto-optical Kerr effects. It became manifest from analysis of X-ray reflectivity and grazing incident X-ray diffraction that even though interface between top Cu layer and Ni layer became rougher, the contrast of Cu and Ni's electron density became manifest after ion irradiation. In addition, the strain after deposition of the films was relaxed after ion irradiation. Strain relaxation related with change of magnetic properties and mechanism of intermixed layer's formation was explained by thermo-chemical driving force due to elastic and inelastic collision of ions.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.250-250
• /
• 2012

Recently, multiferroic materials have attracted much attention due to their fascinating fundamental physical properties and potential technological applications in magnetic/ferroelectric data storage systems, quantum electromagnets, spintronics, and sensor devices. Among single-phase multiferroic materials, $BiFeO_3$, in particular, has received considerable attention because of its very interesting magnetoelectric properties for application to spintronics. Enhanced ferromagnetism was found by Fe-site ion substitution with magnetic ions. In this study, $BiFe_{1-x}Ni_xO_3$ (x=0 and 0.05) bulk ceramic compounds were prepared by solid-state reaction and rapid sintering. High-purity $Bi_2O_3$, $Fe_3O_4$ and NiO powders were mixed with the stoichiometric proportions, and calcined at $450^{\circ}C$ for 24 h to produce $BiFe_{1-x}Ni_xO_3$. Then, the samples were directly put into the oven, which was heated up to $800^{\circ}C$ and sintered in air for 20 min. The crystalline structure of samples was investigated at room temperature by using a Rigaku Miniflex powder diffractometer. The Raman measurements were carried out with a Raman spectrometer with 514.5-nm-excitation Ar+-laser source under air ambient condition on a focused area of $1-{\mu}m$ diameter. The field-dependent magnetization and the temperature-dependent magnetization measurements were performed with a vibrating-sample magnetometer. The x-ray diffraction study demonstrates the compressive stress due to Ni substitution at the Fe site. $BiFe_{0.95}Ni_{0.05}O_3$ exhibits the rhombohedral perovskite structure R3c, similar to $BiFeO_3$. The lattice constant of $BiFe_{0.95}Ni_{0.05}O_3$ is smaller than of $BiFeO_3$ because of the smaller ionic radius of Ni3+ than that of Fe3+. The field-dependent magnetization of $BiFe_{0.95}Ni_{0.05}O_3$ exhibits a clear hysteresis loop at 300 K. The magnetic properties of $BiFe_{0.95}Ni_{0.05}O_3$ were improved at room temperature because of the existence of structurally compressive stress.