• Journal of Biosystems Engineering
• /
• v.24 no.2
• /
• pp.107-114
• /
• 1999

To find the best combustion conditions in the heavy oil burner kinetic viscosity of heavy oil A, B and C at different temperature range, from 40 to 140$^{\circ}C$, and the droplet sizes of the heavy oils at different temperature and pump pressure were measured. And, combustion characteristics were investigated under the different conditions : two different heavy oil and three different oil temperature. At temperature of 70, 100, 130$^{\circ}C$ the kinetic viscosity of heavy oil A and B are 7.9, 5.7, 4.3 and 30.4, 13.7, 7.9cSt, respectively. The greatest and smallest viscosity were 7,455 cSt at C oil on 27$^{\circ}C$ and 4.26cSt at A oil on 140$^{\circ}C$. The magnitude of viscosity difference between at 100$^{\circ}C$ and 140$^{\circ}C$ under 6 cSt in cases of A and B oil, but more than 30cST on C oil. Of the droplet sizes, the biggest and smallest droplet size in A oil were 98$\mu\textrm{m}$ at oil temperature of 130$^{\circ}C$(4.3cSt), pump pressure of 1.57MPa and 72$\mu\textrm{m}$ at 70$^{\circ}C$(7.9cSt), 2.35MPa, respectively. It appeared that as spraying pressure increased the droplet size decreased, however, no distinct differences were found in the effects of kinetic viscosity on the droplet sizes of the test range. The best combustion performance was observed when droplet size, spraying pressure and oil temperature were 73$\mu\textrm{m}$, 2.35MPa and 70$^{\circ}C$ producing CO2 of 13.1%, CO of 13ppm and flue gas temperature of 250$^{\circ}C$ in A oil combustion For B oil, it was100$^{\circ}C$, 2.35MPa, 52$\mu\textrm{m}$, producing CO2 of 10ppm and flue gas temperature of 260$^{\circ}C$. In general, it appeared that better combustion results were observed in the smaller droplets produced burner condition.

• Applied Chemistry for Engineering
• /
• v.5 no.3
• /
• pp.419-424
• /
• 1994

An oil stain on the steel induced by metal working oil was studied on the six kinds of fat and oil compounds(rapeseed oil, oleic acid, methyl oleate, oleyl alcohol, lauryl amino, and lanolin) by MIL-C-22235A test. The samples used for the printing on the oil stain plates were prepared by the addition of fat and oil compounds(10wt% ) and antioxidants(B. H. T, B. T, T. C. P; 0.5wt%) to base oil(spindle oil; 1.5wt% of sulfur). An analysis based on the experimental data indicated that B.T was more effective than B. H. T and T. C. P as antioxidant for inhibiting oil stains. And acid values exerted a bad influence upon the preventation of oil stains. As expected by the chemical structure of fat and oil compound, oleic acid that could react with iron ions produced more stains on the steel pannel.

• Nutrition Research and Practice
• /
• v.3 no.4
• /
• pp.323-327
• /
• 2009

This study was to investigate the role of complementary and alternative medicine in the prevention and treatment of benign prostatic hyperplasia. For this purpose, a randomized, double-blind, placebo-controlled trial was performed over 12 months on 47 benign prostatic hyperplasia patients with average age of 53.3 years and international prostate symptom score over 8. Subjects received either sweet potato starch (group A, placebo, 320 mg/day), pumpkin seed oil (group B, 320 mg/day), saw palmetto oil (group C, 320 mg/day) or pumpkin seed oil plus saw palmetto oil (group D, each 320 mg/day). International prostate symptom score, quality of life, serum prostate specific antigen, prostate volume and maximal urinary flow rate were measured. In groups B, C and D, the international prostate symptom score were reduced by 3 months. Quality of life score was improved after 6 months in group D, while those of groups B and C were improved after 3 months, compared to the baseline value. Serum prostate specific antigen was reduced only in group D after 3 months, but no difference was observed in prostate volume in all treatment groups. Maximal urinary flow rate were gradually improved in groups B and C, with statistical significance after 6 months in group B and after 12 months in group C. None of the parameters were significantly improved by combined treatment with pumpkin seed oil and saw palmetto oil. From these results, it is suggested that administrations of pumpkin seed oil and saw palmetto oil are clinically safe and may be effective as complementary and alternative medicine treatments for benign prostatic hyperplasia.

• Korean Journal of Remote Sensing
• /
• v.39 no.3
• /
• pp.311-323
• /
• 2023

Oil spill accidents can cause various environmental issues, so it is important to quickly assess the extent and changes in the area and location of the spilled oil. In the case of oil spill detection using satellite imagery, it is possible to detect a wide range of oil spill areas by utilizing the information collected from various sensors equipped on the satellite. Previous studies have analyzed the reflectance of oil at specific wavelengths and have developed an oil spill index using bands within the specific wavelength ranges. When analyzing multiple images before and after an oil spill for monitoring purposes, a significant amount of time and computing resources are consumed due to the large volume of data. By utilizing Google Earth Engine, which allows for the analysis of large volumes of satellite imagery through a web browser, it is possible to efficiently detect oil spills. In this study, we evaluated the applicability of four types of oil spill indices in the area of various land cover using Sentinel-2 MultiSpectral Instrument data and the cloud-based Google Earth Engine platform. We assessed the separability of oil spill areas by comparing the index values for different land covers. The results of this study demonstrated the efficient utilization of Google Earth Engine in oil spill detection research and indicated that the use of oil spill index B ((B3+B4)/B2) and oil spill index C (R: B3/B2, G: (B3+B4)/B2, B: (B6+B7)/B5) can contribute to effective oil spill monitoring in other regions with complex land covers.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.43 no.9
• /
• pp.1400-1406
• /
• 2014

This study investigated the quality characteristics of sea salt coated with coffee oil (SCO). Three-year-old salt was used after drying in an oven at $105^{\circ}C$ for 2 hours. Product A was composed of 100 g of sea salt and 8 g of coffee oil, product B was 100 g of sea salt and 16 g of coffee oil, and product C was 100 g of sea salt, 8 g of coffee oil, and 0.3 g of shell powder. The moisture content, ash content, color, peroxide value, acid value, and sensory evaluation of sea salt coated with coffee oil were determined monthly during 5 months of storage at room temperature. The contents of moisture and ash of SCO were 2~3% and 81~83%, respectively, but not significantly different during the storage period. Calcium content of product C was higher than that of product A or B. Coffee flavor in all SCO products was retained for 3 months. Hunter L, a, and b color values in SCO decreased with increasing storage period. However, redness and yellowness of product B were higher than those of other products. The peroxide and acid values of products A and C were lower than those of product B during storage period. Sensory evaluation during the storage period showed that quality of product A and C was maintained for 4 months, whereas product B was preserved for 3 months.

• Journal of Environmental Impact Assessment
• /
• v.7 no.2
• /
• pp.89-102
• /
• 1998

The purpose of this study is to seek AEI(Air Environmental Indices), PSI(Pollutant Standard Index) and the urban air quality control goal(the best available alternative energy program) by assessing the best ratio of energy types used in urban enterprises, based on harmful health effect and air quality standard and costs. This study is focused on an urban area(Puchun), where area sourcees are associated with heavy traffic, large population, and its industrial sources with large emissions. In the first step, air modeling, estimation of AEI and PSI, and benefit-cost analysis were carried out. In the second step, we assessed that 660 scenarios about the ratio of B-C oil, light oil and LNG used in urban enterprises with regard to air quality and cost. In the third step, the best available alternative energy program was selected for the ratio of energy species(B-C oil, light oil and LNG) by using the lexicographic method. From the emission analysis, main source of $NO_2$ is identified as industries and air quality is evaluated according to the ratio of B-C oil, light oil and LNG used in urban enterprise. The modeling data of TSP, $SO_2$, $NO_2$, CO, $O_3$, by ISC3 and PBM are respectively $118{\mu}g/m^3$, 0.027ppm, 0.025ppm, 2.0ppm, 0.55ppm in indurstrial area. That data are close to Environmental Air Quality Standard. By means of sensitivity analysis, we obtained the difference in concentration between the areas(Nae-dong, Joong-dong) according to the ratio of B-C oil, light oil and LNG used in the industries. From the result of alternatives assessment the lowest AEI value and cost, the ratio of B-C oil, light oil and LNG are 2.5%, 20%, 77.5%, respectively.

• Journal of Energy Engineering
• /
• v.12 no.4
• /
• pp.267-273
• /
• 2003

Emulsion fuel is a very attractive fuel because of its energy saving and pollution prevention properties. We investigated and compared the combustion efficiency of B-C oil and emulsion fuel i.e. fuel made from the mixture of B-C oil and waste water. By installing an R-type thermocouple and an optical pyrometer on each side of the boiler, and by placing a combustion analyzer at the point of gas emissions, We were able to measure and compare each flame temperature, combustion rate and the concentration of emitted gas when B-C oil and emulsion fuel are burned. The following results were obtained: The flame temperature of emulsion fuel at the front and rear of the boiler is about 50$^{\circ}C$ lower than the flame temperature of B-C oil. The reason for this difference in temperature is that both latent and sensible heat is lost due to the moisture in the waste water of emulsion fuel. An analysis of emitted gases shows that when emulsion fuel is used polluting substances decrease also the concentration of CO becomes considerably lower. The combustion efficiency for B-C oil and emulsion fuel is 85.5% and 84.8% respectively.

• Food Quality and Culture
• /
• v.1 no.1
• /
• pp.13-17
• /
• 2007

The volatile flavor compounds of Saussurea lappa C.B. Clarke, a perennial, aromatic and medicinal herbaceous plant of the Asteraceae family, were isolated by the hydro distillation extraction method using a Clevenger-type apparatus, and analyzed by gas chromatography (GC) and gas chromatography-mass spectrometry (GC/MS). The plant yielded a light yellow colored oil (0.02%, v/w). From S. lappa C.B. Clarke root oil, sixty-three volatile flavor compounds were tentatively identified, among which sesquiterpene was predominant (21.70%). The identified compounds of the root oil constituted 87.47% of the total peak area. From the constituents making up more than 5% of the volatile flavor components, a long-chain aldehyde, (7Z, 10Z, 13Z)-7, 10, 13-hexadecatrienal, was the most abundant volatile flavor compound (21.20%), followed by dehydrocostuslactone (10.30%) belonging to sesquiterpene lactone, valerenol (5.30%) and vulgarol B (5.06%).

• Molecular & Cellular Toxicology
• /
• v.1 no.3
• /
• pp.189-195
• /
• 2005

Industrial development has increase consumption of crude oil and environmental pollution. A large number of microbial lipolytic enzymes have been identified and characterized to date. To development for a new lipase with catalytic activity in degradation of crude oil as a microbial enzyme, Acinetobactor sp. B2 was isolated from soil samples that were contaminated with oil in Daejon area. Acinetobactor sp. B2 showed high resistance up to 10 mg/mL unit to heavy metals such as Ba, Li, Al, Cr, Pb and Mn. Optimal growth condition of Acinetobactor sp. B2 was confirmed $30^{\circ}C$. Lipase was purified from the supernatant by Acinetobactor sp. B2. Its molecular mass was determined to the 60 kDa and the optimal activity was shown at $40^{\circ}C$ and pH 10. The activation energies for the hydrolysis of p-nitrophenyl palmitate were determined to be 2.7 kcal/mol in the temperature range 4 to $37^{\circ}C$. The enzyme was unstable at temperatures higher than $60^{\circ}C$. The Michaelis constant $(K_{m})\;and\;V_{max}$ for p-nitrophenyl palmitate were $21.8{\mu}M\;and\;270.3{\mu}M\;min^{-1}mg\;of\;protein^{-1}$, respectively. The enzyme was strongly inhibited by $Cd{2+},\;Co^{2+},\;Fe^{2+},\;Hg^{2+},\;EDTA$, 2-Mercaptoethalol. From these results, we suggested that lipase purified from Acinetobactor sp. B2 should be able to be used as a new enzyme for degradation of crude oil, one of the environmental contaminants.

• Korean journal of food and cookery science
• /
• v.16 no.4
• /
• pp.328-335
• /
• 2000

This study was investigated the effect of application methods of frying oil on the physicochemical properties of frying oil in the school foodservice. Frozen pork cutlet was fried for this study. The most frequent application methods of frying oil in school foodservice and treatments of this paper were as follows ; (A) use the frying oil (36ι) just one day(200ea.$\times$ 5times) (B) reuse the used oil(A method) once more adding 50%(18 ι) fresh oil after 3 or 5 or 7 days (C) reuse the used oil(A method) once more after 3 or 5 or 7 days. The major fatty acids of fresh oil were linoleic acid, oleic acid, palmitic acid, and linolenic acid in order to content. The viscosity of frying oil was increased gradually by increasing the number of frying times and storage period of frying oil after once used. Both redness and yellowness of frying oil showed similar trend to viscosity. As a result of this study, the application methods of frying oil in the school foodservice influenced on the physicochemical properties of frying oil, but acid and peroxide value were under the safety level of frying oil prescribed in the Health Social Affairs Ministry.