• Proceedings of the Korean Environmental Sciences Society Conference
• /
• 2003.05a
• /
• pp.267-270
• /
• 2003

수용성 양이온 안료인 RhB를 대상으로 분말 $TiO_2$와 고정화 $TiO_2$를 이용하여 색도제거실험을 수행한 결과 다음과 같은 결론을 얻었다. 1) 분말 $TiO_2$의 최적 투입량은 0.2 g/L였으며, 대부분 광촉매 반응에 의하여 제거되었다. 고정화 $TiO_2$의 최적 투입량은 210.7 g/L이었고, 광촉매와 흡착에 의해 제거되었다. Langmuir - Hinshelwood 식으로 표현되지 못하였다. 2) 고정화 $TiO_2$를 이용하여 Rhodamine B를 제거할 경우 광촉매 분리 문제는 해결할 수 있으며, 광 투과율을 증가시킬 수 있으나 같은 제거율을 얻기 위해 투입량이 분말에 비해 매우 높은 것이 문제점으로 나타났다.

• Journal of the Korean Ceramic Society
• /
• v.41 no.5
• /
• pp.401-405
• /
• 2004

Undoped SrB $i_2$T $a_2$O$_{9}$, donor-doped Sr$_{0.99}$B $i_2$(Ta$_{0.99}$W$_{0.01}$)$_2$O$_{9}$ and acceptor-doped SrB $i_2$(Ta$_{0.99}$Ti$_{0.01}$)$_2$O$_{8.99$ ceramics were prepared and their microstructure, ferroelectric P-E hysteresis and Curie temperature were investigated. Grain size did not influence P-E hysteresis curve in undoped SrB $i_2$T $a_2$O$_{9}$ ceramics. Donor-Doped Sr$_{0.99}$B $i_2$(Ta$_{0.99}$W$_{0.01}$)$_2$O$_{9}$ ceramics showed more saturated P-E hysteresis curve with larger remanent polarization (P$_{r}$) than undoped SrB $i_2$T $a_2$O$_{9}$ ceramics while acceptor-doped SrB $i_2$(Ta$_{0.99}$Ti$_{0.01}$)$_2$O$_{8.99}$ ceramics led to a pinched P-E hysteresis loop. Larger polarization in donor-doped Sr$_{0.99}$B $i_2$(Ta$_{0.99}$W$_{0.01}$)$_2$O$_{9}$ ceramics resulted from easier domain wall motion by Sr-vacancies.

• Journal of the Korean institute of surface engineering
• /
• v.25 no.5
• /
• pp.215-221
• /
• 1992

This research is aimed at developing(110) preferred TiS2 cathode films and glass typed solid electro-lytes which have high ionic migrations and low electron conductivities for thin secondary solid batteries. To obtain preferred oriented TiS2 thin films on a substrate by CVD method using TiCl4 and H2S gases three factors of heating temperature, inner pressure of furnace and TiCl4/H2S gas mole fraction were ex-amined systematically. To obtain solid films of Li2O-B2O3-SiO2 electrolytes by r.f. sputtering for thin proto-type batteries of Li/Li2O-B2O3-SiO2TiS2, sputtering conditions were examined. TiS2 cathode films showed columnar structure, namely c axis oriented parallely. At low pressure of reaction chamber and low heating temperature, surface of smooth TiS2 films couldd be obtained. Ionic conductivity of Li2O-B2O3-SiO2 films manufactured by r.f. magnetron sputtering were 3$\times$10-7$\Omega$-1cm-1 and electron conductivities were 10-11$\Omega$-1cm-1. Open cell voltage of thin lithium batteries were 2.32V with a designed prototype cell.

• Korean Journal of Materials Research
• /
• v.9 no.10
• /
• pp.1041-1046
• /
• 1999

(Zr(sub)0.8Sn(sub)0.2)$TiO_4$세라믹스와 소결조제로서 ($B_2$$O_3$.Li$_2$O)의 첨가에 따른 마이크로파 유전특성 및 미세구조에 미치는 영향에 대하여 연구하였다. 1.0 mol.% $Sb_2$O(sub)5를 첨가하고 130$0^{\circ}C$에서 5시간 소결한 (Zr(sub)0.8Sn(sub)0.2)$TiO_4$세라믹스의 경우 ($B_2$$O_3$.Li$_2$O)첨가량 증가에 따라 치밀화 및 결정립 성장에 의해 유전상수와 Q.f값은 증가하여 첨가량이 0.35wt.%에서 최대값인 38과 59,000을 각각 나타내었으며, 0.50wt.% 이상 첨가한 경우에서는 제 2상의 생성으로 인하여 감소하였다. 1.0 mol% Sb$_2$O(sub)5와 0.35wt.% ($B_2$$O_3$.$Li_2$O)를 첨가한 (Zr(sub)0.8Sn(sub)0.2)TiO$_4$세라믹스를 125$0^{\circ}C$와 135$0^{\circ}C$에서 5시간 소결한 경우에는 각각 미반응 TiO$_2$의 존재와 과대입자성장에 의한 결정립내기공의 생성으로 인하여 마이크로파 유전특성은 저하되었다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.08a
• /
• pp.172-172
• /
• 2010

$MgB_2$ doped with $TiO_2$ was prepared by the in-situ solid state reaction to study the effects of $TiO_2$ dopant on the flux pinning behavior of $MgB_2$ superconductor. From the field-cooled and the zero-field-cooled temperature dependences of magnetization, the realms of vortex-glass and vortex-liquid states of $TiO_2$-doped $MgB_2$ were determined in the H-T diagram (the temperature dependence of upper critical magnetic field and irreversibility line). The critical current density was estimated from the width of hysteresis loops in the framework of Beam's model at different temperatures. The results indicate that nano-scale $TiO_2$ inclusions play a role of the effective pinning centers and lead to the enhanced upper critical field and critical current density. It is suggested that the grain-boundary pinning mechanism is realized in $TiO_2$-doped $MgB_2$ superconductor.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.1289-1290
• /
• 2007

The composites were fabricated 61Vo.% ${\beta}$-SiC and 39Vol.% $TiB_2$ powders with the liquid forming additives of 12wt% $Al_{2}O_{3}+Y_{2}O_{3}$ as a sintering aid by pressure or pressureless annealing at $1650^{\circ}C$ for 4 hours. The present study investigated the influence of annealed sintering on the microstructure and mechanical of SiC-$TiB_2$ electroconductmive ceramic composites. Reactions between SiC and transition metal $TiB_2$ were not observed in the microstructure and the phase analysis of the SiC-$TiB_2$ electroconductive ceramic composites. Phase analysis of SiC-$TiB_2$ composites by XRD revealed mostly of ${\alpha}$-SiC(6H), $TiB_2$, and In Situ YAG($Al_{5}Y_{3}O_{12}$). The relative density, the flexural strength, the Young's modulus showed the highest value of 86.69[%], 136.43[MPa], 52.82[GPa] for pressure annealed SiC-$TiB_2$ ceramic composites.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.07b
• /
• pp.677-680
• /
• 2003

The effect of $B_2O_3$ addition on the sintering behavior and microwave dielectric properties of $(Zn_{0.8}Mg_{0.2})TiO_3$ ceramic system were investigated. Highly dense samples were obtained at the sintering temperatures below $900^{\circ}C$. Temperature coefficient of resonance frequency(${\tau}_f$) changes to a positive value with increasing the amount of $B_2O_3$ because of the increased amount of rutile phase. The $Q{\times}f_o$ values were determined by the microstructures and sintering shrinkages which are affected by the rutile or second phase. When 6.19 mol.% of $B_2O_3$ added and sintered at $900^{\circ}C$ for 5h, it exhibits ${\epsilon}_r$ =23.5, $Q{\times}f_o$= 67,500 GHz, and ${\tau}f=-1.42ppm/^{\circ}C$.

• Journal of the Korean Ceramic Society
• /
• v.52 no.6
• /
• pp.489-496
• /
• 2015

In this study, novel $Ag_2Se$ sensitized $TiO_2$ nanocomposites were prepared by facile sonochemical assisted synthesis method. The as-prepared products were characterized by X-ray diffraction (XRD), Scanning electron microscopy (SEM) with energy dispersive X-ray (EDX) analysis, transmission electron microscopy (TEM), and N2 adsorption BET analysis. The as-prepared $Ag_2Se/TiO_2$ nanocomposites simultaneously possessed great adsorptivity for organic dyes and efficient charge separation properties. In the decolorization of rhodamine B, a significant enhancement in the reaction rate was observed for the $Ag_2Se/TiO_2$ nanocomposite compared to the cases of using pure P25 or $TiO_2$. The sonocatalysis activity was higher due to the greater formation of reactive radicals, as well as to the increase of the active surface area of the $Ag_2Se/TiO_2$ nanocomposite.

• Journal of the Korean institute of surface engineering
• /
• v.34 no.1
• /
• pp.25-32
• /
• 2001

$TiB_2$ ceramics were oxidized at 800, 900 and $1000^{\circ}C$ in air for 40 hr, and their oxidation property was investigated using TGA, XRD, SEM and EPMA. The oxidation resistance decreased with an increase in oxidation temperature. The scale was essentially composed of $TiO_2$ only. $B_2$$O_3$ formed during oxidation escaped from the $TiO_2$ oxide scale owing to its high vapor pressure. This made the oxide scale highly porous and thick. The oxidation reaction was mainly governed by the inward transport of oxygen.$ TiO_2$ existing at the outermost scale grew into peculiarly shaped blades, as the reaction progressed.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.11a
• /
• pp.321-324
• /
• 2003

The effects of various sintering additives such as $Bi_2O_3+V_2O_5$, $BiVO_4$, $B_2O_3$, and $CuO+V_2O_5$ on the low-temperature sintering and microwave dielectric properties of $(ZnMg)TiO_3$ system were studied. Sintering was enhanced by the sintering additives and highly dense samples were obtained for $(Zn_{0.8}Mg_{0.2})TiO_3$ at the sintering temperature of $910^{\circ}C$. $(Zn_{0.8}Mg_{0.2})TiO_3$ with 6.19 mol.%$B_2O_3$ was found to show the best sintering and microwave dielectric properties.