• 한국전기전자재료학회논문지
• /
• 제15권8호
• /
• pp.671-677
• /
• 2002

In this study, the high frequency SMD ceramic resonators with the size of $3.7{\times}3.1{\times}0.385\textrm{mm}^3$ were fabricated using $Pb_{0.88}(La_{0.6}Nd_{0.4})_{0.08}(Mn_{1/3}Sb_{2/3})_{0.02}Ti_{0.98}O_3$ ceramics with the variations of electrode radius size. With increasing the electrode radius size, resonant resistance in third overtone mode was decreased and electromechanical coupling factor($k_{t3}$) in third overtone mode was showed constant values. Taking into consideration mechanical quality factor($Qm_{t3}$) of 5,552 and dynamic range(D.R) of 60.72dB in third overtone mode, the ceramic resonator with the electrode radius size of $\theta$1.13mm was suitable for 20MHz resonator application.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 D
• /
• pp.1534-1536
• /
• 1998

We designed and fabricated plate-type linear ultrasonic motor. It used multi-vibration mode, 1st Longitudinal and 4th Bending mode. To analyze vibration mode and find maximum displacement point, we simulated using FEM(Finite Element Method). The plate-type linear ultrasonic motor was fabricated by the simulation results. Also, to confirm application to card-forwarding device, frequency and load characteristics were measured. Its resonance frequency was 49.6 kHz, and its maximum speed was about 0.6m/s when no load. Also, its maximum efficiency was 1.2 % and in that time, speed and torque was 0.3 m/s and 0.7 mNm, respectively.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 학술대회 논문집 전문대학교육위원
• /
• pp.14-16
• /
• 2004

This paper describes a boost converter to be operated at the boundary of continuous current mode(CCM) and discontinuous current mode(DCM) for power factor correction and low cost. A control method to be utilized in simulation is a average Current mode method in case of operating in CCM. The simulation results show that Better is the CCM converter then the DCM converter in harmonic content and input current waveform. And A Double-boost converter is superior to single-boost converter for input-current harmonic.

• 전자공학회논문지A
• /
• 제32A권4호
• /
• pp.24-31
• /
• 1995

In this paper, the dual-mode burst-error-correcting decoding algorithm is adapted to the multiple trellis-coded .pi./4 shift QPSK in order to achieve the improvement of bit error rate (BER) performance over fading channels. The dual-mode adaptive decoder which combines maximum likelihood decoding with a burst detection scheme usually operates as a Viterbi decoder and switches to time diversity error recovery whenever an uncorrectable error pattern is identified. Rayleigh fading channels and Rician fading channels having the Rician parameter K=5dB are used in computer simulation, and the simulation results are compared with those of interleaving techniques. It is shown that under the constraint of the fixed overall memory quantity, the dual-mode adaptive decoding scheme gains an advantage in the BER performance with respect to interleaving strategies.

• 전자공학회논문지D
• /
• 제34D권4호
• /
• pp.87-93
• /
• 1997

An electro-optic polymer digital optical switch with a coupling region modified for optimum mode coupling is proposed, and it is analyzed by using the beam propagation method combined with the effective index method. Its modified coupling region is adiabatically introduced along the propagation direction from the branching point of the two waveguides. The structure of the modified coupling region and its refractive index profiles are designed to optimize the mode coupling in the Y-branch waveguide. Therefor, the switching performance of the device may be enhanced with a fixed device length. It is confirmed from the numerical calculation that the drive voltage is reduced by more than 30 percents and te crosstalk is improved by about 8dB.

• 한국소음진동공학회논문집
• /
• 제12권1호
• /
• pp.12-20
• /
• 2002

To control the noise of an enclosed sound field, we built a state space model using the acoustic modal parameter description. Using the state space model, we can investigate the controllability and observability, and find an appropriate position of control speaker and microphone to control sound field of the enclosed space. We implemented LQR(linear quadratic regulator) controller and reduced order observer to reduce the first acoustic mode. Experiments showed satisfactory results of 4∼10 dB reduction of magnitude of the first acoustic mode, and support the feasibility of the proposed scheme to lightly damped acoustic field.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 심포지엄 논문집 정보 및 제어부문
• /
• pp.319-321
• /
• 2007

This paper introduces a general overview of the 6000m class deep-sea ROV. Hemire and Henuvy. and then describes its motion control system. It is developed by Korea Ocean Research & Development Institute(KORDI) for 6 years since 2001. sponsored by the Ministry of Maritime Affairs and, Fisheries (MOMAF). Hemire is remotely operated by a fiber optic telemetry. where 6 thrusters are controlled by operator in manual mode and by auto depth control and auto heading control in auto mode. In this paper. operational mechanism of manual and automatic mode with some convenient functions for operator is desc.ribed. Finally, results of sea trial conducted at the Philippine sea where a depth is 5.770m are shown.

• Journal of Power Electronics
• /
• 제18권3호
• /
• pp.871-878
• /
• 2018

In this paper, the conducted EMI reduction performances of active feed-forward current-sensing current-actuation (CSCA) and voltage-sensing current-actuation (VSCA) filters for a three-phase induction motor drive system are evaluated by experiments. For comparison purposes, the conducted EMI (CM emission, DM emission and total emission) of a three-phase induction motor drive with a conventional CM choke, a conventional CM choke in series with an active VSCA filter, and an active CSCA filter (where the CM choke was modified and used as a sensing current transformer) were compared to the case of a system without any filter inserted. Experimental results show that the active CSCA and VSCA filters can improve the CM reduction performance of the conventional CM choke by about 5 dB especially at low-frequencies. However, for DM comparisons, it shows that there is no different between cases with and without filters inserted.

• 대한의용생체공학회:학술대회논문집
• /
• 대한의용생체공학회 1992년도 추계학술대회
• /
• pp.127-129
• /
• 1992

In this paper, we describe about control system for eletro-hydraulic LVAD(Left Ventricular Assist Device) and control algorithm for two operation mode. One is asynchronous operation mode and the other is synchronous operation mode synchronized with natural heart's R pulse. We also present implementation method of software PI algorithm for velocity control of motor used in LVAD system and its response.

• 동력기계공학회지
• /
• 제9권4호
• /
• pp.175-180
• /
• 2005

Incorrections between model and plant are parameter, system order uncertainties and modeling error due to disturbance like friction. Therefore to achieve a good tracking performance, adaptive discrete time sliding mode tracking controller is used under time-varying desired position. Based on the diophantine equation, a new discrete time sliding function is defined and utilized for the control law. Robustness is increased by using both a recursive least-square method and a sliding function-based nonlinear feedback. The effectiveness of the proposed control algorithm is proved by the results of simulation and experiment.