• The Research Journal of the Costume Culture
• /
• v.21 no.1
• /
• pp.81-92
• /
• 2013

Many women feel pain in their breasts while running due to an excessively large degree of breast movement. Therefore, most sports bras pursue a reduction in breast movement. The purpose of this study is to investigate the breast movement reduction effect of a selection of sports bra designs according to the intensity of the sport and the breast size of the wearer. The study measured differences in the vertical movement of the nipple with 4 types of sports bras and 3 exercise speeds(4km/h, 7km/h, and 10km/h). Subjects included women in their 20s with bra sizes of either B cup(n=3) or C cup(n=3). The results of the study are as follows. Breast movement differed according to running speed and breast size; breast movement significantly increased starting with jogging speed(7km/h), and the C-cup group had a larger degree of vertical movement than the B-cup group. A superior effect on breast movement during jogging(7km/h) and sprinting(10km/h) was observed differently by bra cup sizes. To C-cup group, encapsulation-style sports bra, which provides horizontal support across the upper breast and padding inside the shoulder strap and bra cup to ease impact was most effective and next effective style was the compression-style bra with a princess line to cover the breasts solidly. Most style sports bra were effective in the B-cup group. Besides aforementioned encapsulation-style sports bra, the compression-style bra with a band, which presses the breasts against the chest wall, reduced breast movement effectively.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.15 no.2
• /
• pp.15-26
• /
• 2013

The purpose of this study is to offer basic data for designing and making of brassiere with the consideration of the physiological nature of man. Each of 3/4-cup wired upward-support-type Mold Bra of 75 size with basic pad made at three representative domestic companies (A, B and C Company) was selected for analysis of pattern and components. The following is the result of this study. 1. That Company A's bra had the highest cup, relatively narrow width, the widest front-center and the highest front center at front pad. That of Company B had relatively short wing over the base and much difference at the height of cup depending on the presence of wire. That of Company C had low and wide cup, the widest bust span and the front center width, the front center height of front pad, the base length of front pad and the length of wings were observed to be of the figures between those of Company A and B. 2. The Bra of Company A had the biggest front center angle of $6^{\circ}$, while that of Company C had the biggest wing angle of $18^{\circ}$. The Bra of Company B showed the biggest difference of patterns depending on the presence of wire. Those of Company A and C showed very similar shape when wire was inserted. 3. The order of making brassiere is following: making of exterior mold cup${\rightarrow}$ sewing exterior cup and circumference of mold${\rightarrow}$ sewing base and wings${\rightarrow}$ sewing binding tape to base${\rightarrow}$ sewing cup and main pad${\rightarrow}$ sewing binding tape to upper sides and upper part of wings${\rightarrow}$ sewing wire-tape to interior base of cup${\rightarrow}$ inserting of wire inside wire-tape${\rightarrow}$ sewing hook & eye on the back of wings${\rightarrow}$ sewing shoulder string.

• Archives of Plastic Surgery
• /
• v.38 no.1
• /
• pp.63-68
• /
• 2011

Purpose: Mastectomy is one of the operative procedures of female to male transsexuals. It is aimed to excise all of breast tissues and to reconstruct male chest wall, areola, and nipple. Breast sizes are varied by developmental status and their hormonal therapy. There are several approaches for mastectomy. This study is aimed to suggest appropriate mastectomy methods according to breast size in the female to male transgenders. Methods: We retrospectively analysed 46 patients of female to male transgenders. Breast size was categorized by their inner wear size. In A cup size, mastectomy was done with periareolar approach. In C cup size, inframammary fold approach subcutaneous mastectomy was performed. In B cup size, periareolar approach was used for grade A or B ptosis patient, and inframammary fold approach was choosen for the patient with grade C ptosis. Results: Subcutaneous mastectomy was done through semicircular periareolar approach for 26 patients. There were 2 cases of major complications that should be corrected by hematoma evacuation. Circumareolar approach was used for 5 patients, and a case of nipple-areolar complex necrosis was observed. Two cases of another complications which were irregularity of breast and wound disruption could be corrected. Inframammary fold approach was selected for 15 patients. There was a case of wound disruption, so revision surgery whould be done. Four cases of breast irregularity was corrected spontaneously, and 2 cases of partial necrosis of nipple-areolar complex were corrected with secondary healing. Patient satisfaction score for periareolar, cicumareolar, and inframmammary fold approach were 4.5, 4.2 and 4.1, respectively. Some major and minor complications were observed, but satisfactory results could be secured. Conclusion: Semicircular periareolar incision looked adequate for A cup size patient, circumareolar incision was suitable for B cup size with grade A or B ptosis. In B cup size with grade C ptosis patient and C cup patients, inframammary fold incision looked suitable for optimal results.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.26 no.6
• /
• pp.821-832
• /
• 2002

The purpose of this study was to develop grading method of the basic brassiere patterns therewith, provide for 12 size's brassiere patterns and prove fitness of their's and shape. The collected data were statistically processed using the SAS 6.12 for Means, Standard Deviation, etc. The results of this study can be summarized as follows; 1. The basic sizes adopted at the first design stage (see fig.1-2) were 75AA, 75A and 75B each of which was designed as upper foundation basic pattern in reference to the cup size. At the second stage, each of the upper body foundation basic pattern was used to design lower cup, upper up, front panel and wing in their order(see fig.3-6). At the third stage, the other sizes were graded in reference to the three brassiere patterns (75AA, 75A and 75B) to produce 12 brassiere sizes(see Tab. 7-8). In order to develop the basic patterns of adult women's brassieres, 33 women were selected per 11 size combination(3 women per size combination), and then, their brassiere fitting was teated. As a result, the fronts of the basic patterns were found to have such problems as undone front center, poor levelling of upper cup's bottom line or lower cup's top line, poor shape of upper cup's outside top line and shoulder strip position. On the other hand, on the rear side of the basic patterns, the central part of the wing was slightly lifted, while the wing width and straps'interval did not befit the ful1-cup brassiere. The result of this first brassiere fitting test showed that the functionality and aesthetics of the basic pattern brassieres were more or less satisfactory, and thus, the problems were addressed for the second teat. In the second test, the aesthetics, breast-shaping effect and functionality of the basic pattern brassieres were much improved. 2. We were to present the final brassiere sizing system to extend the interior length of breast and the exterior length of breast on the basis of fitting test. Thereby, 75B$.$80A$.$80B$.$85A$.$85B's the interior lengths of breast were enlarged to 0.7cm, the rest size was enlarged to 0.5cm and the exterior length of breast was enlarged to 0.5cm regardless of sizes. 3. The upper foundation basic patterns of 75AA and 75B were presented and and the basic brassiere pattern and grading pattern were presented through to.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.49 no.5
• /
• pp.291-296
• /
• 2000

Recently large size color TV and computer monitor are very popular and a lot techniques are being developed to get a high quality picture on the screen through reducing the convergence error among the red, green and blue beams and achieving a high focusing. One of the techniques is considering the mutual effects of the components of the Brown tube. The magnetic deflection yoke, especially, stands immediately next to the electron gun and generates the leakage magnetic fields at the electron gun which affects the trajectories of the electron beams inside the gun. Hence a shield cup made of thin conducting plate is located at the end of electron gun in order to shield the leakage flux from the deflection yoke. Since the red, green and blue beams are placed unsymmetrically the shielding effects of the shield cup on the beams are not same and eddy current controller, made of thin conducting plate, is auxiliary placed inside the shield cup. In this paper a transient magnetic field analysis algorithm is developed using boundary element method, and applied to the analysis of the shielding effects of the eddy current controller of shield cup in an electron gun.

• International Journal of Internet, Broadcasting and Communication
• /
• v.15 no.1
• /
• pp.164-170
• /
• 2023

The purpose of this study is to analyze the big data of Adidas brand participating in the Qatar World Cup in 2022 as a FIFA partner to understand useful information, semantic connection and context from unstructured data. Therefore, this study collected big data generated during the World Cup from Adidas participating in sponsorship as a FIFA partner for the 2022 Qatar World Cup and collected data from major portal sites to understand its meaning. According to text mining analysis, 'Adidas' was used the most 3,340 times based on the frequency of keyword appearance, followed by 'World Cup', 'Qatar World Cup', 'Soccer', 'Lionel Messi', 'Qatar', 'FIFA', 'Korea', and 'Uniform'. In addition, the TF-IDF rankings were 'Qatar World Cup', 'Soccer', 'Lionel Messi', 'World Cup', 'Uniform', 'Qatar', 'FIFA', 'Ronaldo', 'Korea', and 'Nike'. As a result of semantic network analysis and CONCOR analysis, four groups were formed. First, Cluster A named it 'Qatar World Cup Sponsor' as words such as 'Adidas', 'Nike', 'Qatar World Cup', 'Sponsor', 'Sponsor Company', 'Marketing', 'Nation', 'Launch', 'Official', 'Commemoration' and 'National Team' were formed into groups. Second, B Cluster named it 'Group stage' as words such as 'Qatar', 'Uruguay', 'FIFA' and 'group stage' were formed into groups. Third, C Cluster named it 'Winning' as words such as 'World Cup Winning', 'Champion', 'France', 'Argentina', 'Lionel Messi', 'Advertising' and 'Photograph' formed a group. Fourth, D Cluster named it 'Official Ball' as words such as 'Official Ball', 'World Cup Official Ball', 'Soccer Ball', 'All Times', 'Al Rihla', 'Public', 'Technology' was formed into groups.

• The Journal of Korean Medicine Ophthalmology and Otolaryngology and Dermatology
• /
• v.20 no.3
• /
• pp.82-97
• /
• 2007

Objective : Cortex of Ulmi pumilae(CUP) has been used to treat several diseases including boil, swelling, and scabies etc. Recently, CUP was known to have wrinkle care and whitening actions. But, It's exact mechanisms are unclear. Methods : The present study was designed to investigate effects of CUP on Human HaCaT keratinocyte and malignant melanoma cells such as SK-MEL-2 and B16F10 in terms of cell viabilities, proliferations, DPPH free radical scavenging activities, oxygen free radical productions and inhibitory action on elastase activities. Results : CUP accelerated proliferation of HaCaT keratinocytes in the lower concentration. CUP also prevented cell death of HaCaT induced by Hydrogen peroxide, which products oxygen free radicals. On the contrary, CUP did not affect proliferations of SK-MEL-2 or B16F10. Futhermore, CUP showed inhibitory action against SK-MEL-2 proliferation at the concentration of $500{\mu}g/m{\ell}$ In addition, CUP was shown to have DPPH free radical scavenging activities and also have inhibitory effects on elastase activities too. On the fluorescent examinations, the present author knows that CUP elevated production levels of oxygen free radicals in malignant melanoma cell, SK-MEL-2. Conclusions : These results suggest that CUP has possibilities of usage for functional cosmetics which have wrinkle care and whitening activities and related mechanisms are involved in inhibition of elastase action and acceleration of oxidative stress in melanoma cell.

• Transactions of Materials Processing
• /
• v.15 no.7 s.88
• /
• pp.504-511
• /
• 2006

The drawability of AZ31B magnesium sheet is estimated at various temperatures($200,\;250,\;300,\;350\;and\;400^{\circ}C$), and forming speed(20, 50, 100mm/min), thickness(0.5, 0.8, 1.0, 1.4mm). The deep drawing process of circular cup and square cup were used in forming experiments. Experimental and FEM analysis are performed to investigate drawability and affection of controlled blank holding force. Through the controlled blank holding force, drawability was improved. Limit drawing ratio is increased from 2.1 to 3.0 in circular cup drawing and change of thickness is decreased from 16.3 to 6.9%. This result is verified by FEM analysis. Through the observation of microstructure, the main cause is investigated as a quantity of the dynamic recrystallization.

• Journal of applied mathematics & informatics
• /
• v.20 no.1_2
• /
• pp.61-74
• /
• 2006

Let G be a simple graph and let G denote its complement. We say that $\bar{G}$ is integral if its spectrum consists of integral values. In this work we establish a characterization of integral graphs which belong to the class $\bar{{\alpha}K_{a,a}\cup{\beta}K_{b,b}}$, where mG denotes the m-fold union of the graph G.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2007.10a
• /
• pp.70-73
• /
• 2007

The forming characteristics of cup-rod combined extrusion process were investigated with process parameter change. Simultaneous forward rod extrusion and backward cup extrusion was conducted with magnesium alloy, AZ31B. Process parameters such as forward extrusion ratio, backward extrusion ratio, and working temperature were controlled in a specific region and the effects of the parameter change were examined. Surface crack was developed in a certain state of the process parameters combination. The crack-free forming limit of the alloy in the combined process was disclosed by the parameter study. The microstructures of the initial and extruded workpieces were observed.