• 한국강구조학회 논문집
• /
• 제15권1호
• /
• pp.69-76
• /
• 2003

본 논문에서 새로운 냉간성형 각형강관 T형 접합부의 최대내력과 변형제한치에 대한 연구이다. 새로운 접합부는 지관을 트러스 평면에 대하여 $45^{\circ}$회전시켜서 주관에 용접하는 형상이고, 지관 $45^{\circ}$회전형 T형 접합부 실험결과 중에서 주관 웨브 파괴가 지배하는 접합부만을 대상으로 설정하였다. $16.7{\leq}2{\gamma}(B/T){\leq}33.3$이고 $0.63{\leq}{\beta}(b_1/B){\leq}0.7$ 범위의 지관 $45^{\circ}$회전형 T형 접합부에 대하여, 최대내력을 정의를 위한 변형제한치는 주관폭의 3% 변형량(3%B) 으로 제안하였다. $0.63{\leq}{\beta}{\leq}0.7$ 범위의 기본형에 대한 기존의 항복선모델을 검토하고, 지관 $45^{\circ}$회전형에 대한 내력식을 제안하였다. 제안내력식은 기둥좌굴이론에 근거하고 있고, 냉간성형시 발생한 곡률부분을 고려하였다. 최종적으로 최적화된 주관단면 선택을 위한, 항복응력도와 $2{\gamma}$의 최적조건을 제안하였다.

• 설비공학논문집
• /
• 제2권2호
• /
• pp.142-154
• /
• 1990

A theoretical cycle analysis has been performed for a basic heat pump, charged with non-azeotropic refrigerant mixtures, R22/R114 and R13B1/R152a. At first, a procedure is introduced to calculate thermodynamic properties simply and correctly, and the advantages of using refrigerant mixtures are discussed through the cycle analysis. It is shown that by using refrigerant mixtures in the heat pump, several improvements can be made. In comparison with conventional pure refrigerants, the application of refrigerant mixtures results in high reliabilities caused by the extension of the application limit, energetic improvements, and a continuous capacity control. From generalizing various results, the optimum compositions in refrigerant mixtures are also determined. The 30%/70% and 40%/60% compositions are selected for R22/R114 and R13B1/R152a, respectively.

• 한국안광학회지
• /
• 제7권2호
• /
• pp.181-187
• /
• 2002

수정체는 조절력의 변화에 의해서 곡률이 변화한다. 조절력은 탄성체인 수정체에 힘을 수직으로 주는 경우 정점 방향으로 길이가 늘어난다. 힘을 받는 수정체는 밀도 분포와 형태가 후면에 치우쳐있어, 후면 방향의 수평 힘 보다 전면 방향의 수평 힘이 더 크다. 그러므로 후면 방향 보다 전면 방향의 두께가 더 많아 늘어난다. 그러나 조절력이 일정 값 보다 커지기 시작하면 전면에서는 팽창률이 한계에 도달하다. 이 때 전면 방향의 수평 힘 보다 후면 방향의 수평 힘이 더 커지게 되어, 전면 방향 보다 후면 방향의 두께가 더 많아 늘어난다. 전면과 후면의 두께변화 차이는 조절력에 대해 2차 곡선(${\Delta}=B_1D+B_2D^2$)을 이룬다. 조절력에 따른 전면과 후면의 두께(${\Delta}t_a$, ${\Delta}t_p$) 차이 변화 곡선은 다음과 같이 표현된다. $${\Delta}t_a=t_a-t_{ao}=t_{max}+t_0{\exp}(-A/B)-t_{ao}$$ $${\Delta}t_p=t_p-t_{po}=t_{min}+t_0{\exp}(A/B)-t_{po}$$ 인간의 수정체에서 구한 각각의 Parameter값은 전면에서 $t_{min}=1.1.06$, $t_0=-0.33$, B=9.32, 후면에서 $t_{max}=1.97$, $t_0=0.10$ B=7.96 등을 얻었다. 조절력에 따른 수정체의 전면과 후면에서 정점 곡률 안정의 변화는 다음과 같다. $$R=R_0+R_1{\exp}(D/k)$$ 수정체에서 구한 각각의 Parameter 값은 전면에서 $R_{min}=5.55$, $R_1=6.87$, k=4.65, 후면에서 $R_{max}=-68.6$, $R_1=76.7$, k=308.5 등을 얻었다.

• 한국초전도학회:학술대회논문집
• /
• 한국초전도학회 1999년도 High Temperature Superconductivity Vol.IX
• /
• pp.178-184
• /
• 1999

We have measured I-V characteristics of Bi$_2Sr_2CaCu_2O_{8+{\delta}}$ mesa containing a small number of intrinsic stacked Josephson junctions in a magnetic field. We fabricated mesa with an area of 40${\times}$40 ${\mu}$m$^2$ containing 3${\sim}$20 intrinsic junctions. We applied magnetic field perpendicular to He CuO$_2$ planes up to 5T. We observed flux-flow branches and flux-flow steps in the I-V characteristics which might be due to collective motion of Josephson vortices in the long junction limit. In a parallel field, critical current I$_c$ varies as I$_c$(B) ${\sim}$ exp(-B/B$_0$), where B$_0$ is about 2T, which is consistent with the theoretical model. DC and AC intrinsic Josephson effects are also discussed.

• 대한기계학회논문집B
• /
• 제25권6호
• /
• pp.799-803
• /
• 2001

Miniature heat pipe(MHP) with woven-wired wick was used to cool the CPU of a notebook PC. The pipe with circular cross-section was pressed and bent for packaging the MHP into a notebook PC with very limited compact packaging space. A cross-sectional area of the pipe is reduced about 30% as the MHP with 4mm diameter is pressed to 2mm thickness. In the present study a performance test has been performed in order to review varying of operating performance according to pressed thickness variation and heat dissipation capacity of MHP cooling module that is packaged on a notebook PC. New wick type was considered for overcoming low heat transfer limit when MHP is pressed to thin-plate. The limiting thickness or pressing is shown to be within the range of 2mm∼2.5mm through the performance test with varying the pressing thickness. When the wall thickness of 0.4mm is reduced to 0.25mm for minimizing conductive thermal resistance through the wall of heat pipe, heat transfer limit and thermal resistance of MHP were improved about 10%. In the meantime, it is shown that the thermal resistance and heat transfer limit for the MHP with central wick type are higher than those of MHP with existing wick types. The results of performance test for MHP cooling modules with woven-wired wick to cool a notebook PC shows the stability as cooling system since T(sub)j(Temperature of Processor Junction) satisfy a demand condition of 0∼100$\^{C}$ under 11.5W of CPU heat.

• 품질경영학회지
• /
• 제18권2호
• /
• pp.1-8
• /
• 1990

Replacement policies based on both the system age and the random repair cost are studied. The system is replaced when it reaches age T (Policy A), or when it fails for the first time after age T (Policy B). If the system fails before age T, the repair cost is estimated and repair is then undertaken if the estimated cost is less than a predetermined limit L ; otherwise, the system is replaced. After repair, the system is as good as new with probability (1-p) or is as good as old with probability P. The expected cost rate is obtained, its behavior is examined, and way of obtaining optimal T and L is explored.

• 소성∙가공
• /
• 제17권7호
• /
• pp.466-472
• /
• 2008

In this paper, tension tests and formability tests are performed to construct a database related to mechanical properties and the formability of the AZ31B Mg alloy sheet. A forming test with a hemi-spherical punch is conducted at varying temperatures to establish a forming limit diagram. In order to verify the applicability of the analysis using the conventional flow hardening model, a finite element analysis is performed on the hemi-spherical punch forming process and the results are compared with experimental ones. The study investigates problems involving a computational analysis that does not consider flow softening of the magnesium alloy at elevated temperatures.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2008년도 춘계학술대회 논문집
• /
• pp.366-369
• /
• 2008

In this paper, tension tests and formability tests are performed to construct a database related to mechanical properties and the formability of the AZ31B Mg alloy sheet. A forming test with a hemi-spherical punch is conducted at varying temperatures to establish a forming limit diagram. In order to verify the applicability of the analysis using the conventional flow hardening model, a finite element analysis is performed on the hemi-spherical punch forming process and the results are compared with experimental ones. The study investigates problems involving a computational analysis that does not consider flow softening of the magnesium alloy at elevated temperatures.

• 한국초전도학회:학술대회논문집
• /
• 한국초전도학회 1999년도 High Temperature Superconductivity Vol.IX
• /
• pp.261-261
• /
• 1999

We observed leveling-off of the resistance in granular In/InO$_x$ thin films in the zero-temperature limit. The temperature T$_b$ at which the leveling-off appears gets larger as the sheet resistance R$_n$ increases. This is consistent with the concept that the leveling-off of the resistance is due to the dissipation of the bosonic phase and that the dissipation is enhanced as the resistance increases. The magnetic field dependence of the saturated resistance R$_b$ at low temperatures fits the modified square-root cusp-like form R$_b$/R$_n$=α exp[-b(B/B$_c$-1)$^{-1/2}$] for the magnetic field in the range B$_c$$_f$ where B$_c$ is the onset magnetic field of the resistance leveling-off. α and b are constants of order 1. For B>B$_f$ tansport properties are described by the theory of the fermi insulator. From the results, we attribute the leveling-off to the dissipative quantum tunneling of vortices, which supports the models predicting the vortex-motion-induced insulating phase related with the concept like"dirty boson" [1]l and "hose metal" [2].

• Journal of the Korean Statistical Society
• /
• 제13권2호
• /
• pp.87-106
• /
• 1984

It ${X_t}$ is a sequence of independent identically distributed normal random variables, then the conditional probability density of $X_1, X_2, \cdots, X_n$ given the first p+1 sample autocovariances converges to the maximum entropy probability density satisfying the corresponding covariance constraints as the length of the sample sequence tends to infinity. This establishes that the maximum entropy probability density and the associated Gaussian autoregressive process arise naturally as the answers of conditional limit problems.