• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 2003년도 추계 학술발표회논문집
• /
• pp.3-7
• /
• 2003

The velocity structure beneath the CHNB broadband station is determined by receiver function analysis using by from teleseismic P waveforms. The detailed broadband receiver functions are obtained by stacking method for source-equalized vertical, radial and tangential components of teleseismic P waveforms. A time domain inversion uses the stacked radial receiver function to determine vertical P wave velocity structure beneath the station. The crustal velocity structures beneath the stations are estimated using the receiver function inversion method in the case at the crustal model parameterized by many thin, flat-lying, homogeneous layers. Events divide into 4 groups. four azimuths corresponding to events in group a(southwest), b(south), c(southeast), d(northeast). The result of crust at model inversion shows the crustal velocity structure beneath the CHNB station varies smoothly with increasing depth. The conard discontinuity lies around 18 km and moho discontinuity lies range from 30 to 34 km.

• 한국가시화정보학회지
• /
• 제21권3호
• /
• pp.39-48
• /
• 2023

In this study, we investigate the effects of slots installed on the tip of a rotor blade on aerodynamic characteristics. The slots weaken the strength and spatial coherence of the tip vortex at early vortex age and accelerate the dissipation of the generated tip vortex. Accordingly, the turbulence intensity of the rotor wake is reduced at both near and far wake, which leads to a reduction in broadband noise. Tonal noise is also reduced by mitigation of tip vortices, but tonal noise reduction is limited to a narrower range of azimuths than broadband noise due to the extinction of tip vortices. In addition, slots reduce both mean thrust and thrust fluctuations. Reduction in thrust fluctuations leads to a reduction in blade loading noise, resulting in a reduction in tonal noise.

• 지질공학
• /
• 제6권1호
• /
• pp.33-43
• /
• 1996

본 연구에서 세 성분 단일 관측을 이용해서 국지와 광역 지진 및 폭발외 진원 깊이, 진원시등을 재결정 했다. 우리는 진원 방위각, 시범 지진 진앙이 산출될 수 있느 편파분석 방법예 의하여 이 연구를 수행하려고 한다.일정한 층속도 모텔에 기초를 두고 이론적 주시표가 각 이벤트 입력 지진 위상들에 맞도록 계산 될 수 있다. 지진 규모는 P파 코다(coda)의 지속시간을 이용해서 결정한다. 최소 오차에 대응하는 결과는 이 연구소에서 모두 지진의 평균 깊이는 15km 이라는 것을 보여주는데 이것은 다른 연구소 조사와 매우 일치함을 알 수 있다(Kang and Choi, 1993).

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2009년도 춘계학술대회 논문집
• /
• pp.103-107
• /
• 2009

Because individual HRTFs (Head-Related Transfer Functions) vary from a person to a person, a HRTF database has been measured by researchers to investigate the inter-subject variation, and to generate high fidelity virtual sound image. Individual HRTFs not only vary between subjects but also vary due to wearing clothes and glasses in daily life. However, influence of different dressing condition on the measured HRTF was not sufficiently investigated. To quantify the effect of wearing clothes and glasses, dummy's HRTF is measured in an anechoic chamber with various dressing condition, and is evaluated in the sense of spectral distortion. HRTFs are measured both in the median plane and in the horizontal plane. In the median plane, under 6kHz, effect of different wearing clothes and glasses is negligible. Over 6kHz, however, effect of clothing distorts HRTF about 6dB in the sense of spectral distortion. Moreover, at high frequencies, effect of glasses is no longer negligible. In the horizontal plane, at some azimuths, even additional light cloth over the dummy can change the spectrum of HRTF (6dB spectral distortion) especially when sound source is at contralateral positions. Therefore, HRTF measurement with different wearing conditions can broaden the capability of HRTF customization whose technique utilizes a HRTF database.

• 한국소음진동공학회논문집
• /
• 제19권12호
• /
• pp.1260-1268
• /
• 2009

Three methods(the stepped sine method, the statistical method(random excitation method) and the maximum-length sequence(MLS) method) for head-related transfer functions(HRTFs) are experimentally compared in view point of accuracy and efficiency. First, the stepped sine method has high signal-to-noise ratio, but low efficiency. Second, the statistical method is fast measurement speed, but weak to noise than the other methods. Finally, the MLS method shows both good efficiency and high signal-to-noise ratio, but it needs additional software or equipment such as MLS signal generator. For comparison of measurement accuracy, HRTFs of KEMAR dummy are measured for various azimuths and elevations. Error norms for magnitude and phase of HRTFs are defined and calculated for the measured HRTFs. The calculated error norms show that the methods give similar results in magnitude and phase except a little phase difference in the MLS method.

• 한국지구물리탐사학회:학술대회논문집
• /
• 한국지구물리탐사학회 2007년도 공동학술대회 논문집
• /
• pp.151-156
• /
• 2007

In December 2006, 2D surface streamer and Ocean Bottom Seismometer (OBS) data were acquired in the Ulleung basin in Korea where strong Bottom Simulating Reflectors (BSR) were shown as a result of 2D and 3D multichannel (MCS) reflection survey. The aim of this study is to provide another reliable source for estimating P wave velocity around BSR depth using OBS data in addition to velocity information from 2D surface seismic data. Four OBSs were deployed and four 20-km shot lines which pass two OBSs respectively were designed. To derive P wave velocity profile, interactive interval velocity analysis using ${\tau}$-p trajectory matching method (Kumar, 2005) was used for OBS data and semblance analysis was used for surface data. The seismic profiles cross the OBS instruments in two different directions yield recordings for four different azimuths. This raised the confidence for the results. All velocity profiles in the vicinity of BSR depth of four OBS sites show almost definite velocity changes which we could consider as upper BSR and free gas layer. Making comparison between velocity from OBS and that from 2D seismic semblance velocity analysis gives consistency in result.

• Nuclear Engineering and Technology
• /
• 제55권10호
• /
• pp.3677-3691
• /
• 2023

Since containment building is the major shielding structure to ensure safety of nuclear power plant, the structural behavior and ultimate pressure capacity of containments must be studied in depth. This paper addresses ambiguous issue of determining free-field position for liner failure by suggesting an expanded free-field region and comparing internal pressure capacities obtained by test data, conservative assumption and suggested free-field region. For this purpose, a practical approach to determine the free-field position for the evaluation of liner tearing is carried out. The maximum principal strain histories versus internal pressure capacities among different free-field positions at various azimuths and elevations are compared with those at the equipment hatch as a conservative assumption. The comparison shows that there are considerable differences in the internal pressure capacity at liner failure within the expanded free-field region compared to the vicinity of the equipment hatch. Additionally, this study proposes an approximate correlation with conservative factors by considering the expanded free-field ranges and material characteristics to determine realistic failure criteria for liner. The applicability of the proposed correlation is demonstrated by comparing the internal pressure capacities of full-scale containment buildings following liner failure criteria according to RG 1.216 and an approximate correlation.

• 한국측량학회지
• /
• 제25권2호
• /
• pp.165-175
• /
• 2007

오늘날 도시공간에 건축되는 건축물은 건물사이 공간을 크게 확보하여 건물내부에 충분한 일광을 얻도록 노력하고 있으며, 건물의 일조량은 건물의 높이뿐만 아니라 건물간의 간격이 매우 중요하다. 하지만 오늘날 고밀도 개발로 인하여 건물사이 간격을 충분하게 확보할 수 없고 쾌적한 거주환경에 대한 요구가 강해지면서 일조권 분쟁이 증가되고 있다. 따라서 본 연구에서는 LiDAR 자료와 수치지도를 연계하여 3차원 국토정보를 구축한 후 일조권분석에 적용하여 다음과 같은 결론을 얻었다. 태양의 고도와 방위각을 이용하고 3차원 도시공간을 정확하게 시뮬레이션하여 각각의 세대별 일조권을 총 일조시간과 연속 일조시간으로 구분하여 정량적으로 분석함으로서 일조권 침해 여부를 보다 정밀하게 판단할 수 있는 방법을 제시하였다. 3차원 국토정보를 이용한 일조권분석방법은 지자체에서 도시계획 및 건축 인허가 업무를 수행할 때 보다 정확한 자료를 제공하여 줄 것으로 판단된다.

• 지질공학
• /
• 제5권2호
• /
• pp.181-192
• /
• 1995

원격지진과 핵실험의 구별에 관한 연구는 많은 지진학자들에 의해서 연구되어 왔다(너틀리와 김, 1976;달만과 이스라엘손, 1977;마세, 1981). 그러나 지역적인 미세지진과 인공지하폭발(진앙거리 400km보다 가까운)은 지진학적 관심에서 볼때 활발하데 연구되지 않았다. 더우기 최근 IAEA(국제 원자력기구)가 북한의 핵무기 개발을 명백하게 분석하는데 이 문제는 매우 중요하지만 한국에서 이런 종류의 연구는 전혀 되지 않았다. 본 연구는 지난 6년동안 북한에서 발생한 인공지하폭발 (약 100개)중에 KSRS자료를 이용하여 수행되었다. 방위각.외견입사각, 진앙거리 및 진앙 등은 단일 관측의 3성분자료를 이용하여 결정된다. 그리고 인공지하폭발의 탐지.진앙확인은 Polarization 기술과 주파수 필터링 방법으로 수행된다. 이 방법은 전환파(converted waves)를 정밀 분석할 수 있으며 비동질의 지각구조 모델을 결정하는데 크게 이용할 수 있었다.

• 한국태양에너지학회 논문집
• /
• 제35권4호
• /
• pp.25-34
• /
• 2015

This research is carried out to provide fundamental data for the design of solar photovoltaic systems. Methodologically, the solar radiation installations from 10 different pyreheliometers are measured, which are set up at 6 and 4 different levels of tilts and azimuth, respectively. Maximum of a yearly accumulated solar radiation is $1,569.8kWh/m^2{\cdot}year$ with a tilt angle of $30^{\circ}$ and an azimuth angle of $0^{\circ}$(south), $1,558.5kWh/m^2{\cdot}year$ with an azimuth angle of $0^{\circ}$(south) in combination of a tilt angle of $35^{\circ}$. This paper estimates that in designing fixed solar photovoltaic systems with a tilt angle of $12.5^{\circ}{\sim}50^{\circ}$(south) and a tilt angle of $35^{\circ}$ in combination of an azimuth angle of $S45^{\circ}W{\sim}S45^{\circ}E$, a tilt angle and an azimuth angle will cause a maximum 6.8% and 9.9% of efficiency variation respectively, depending on a installed solar module's angle and direction.