• 제목/요약/키워드: Aza-15-crown-5

검색결과 9건 처리시간 0.019초

가교도를 가진 1-Aza-15-Crown-5-스틸렌-디비닐벤젠 수지 합성 (Resin Synthesis of 1-Aza-15-Crown-5-Styrene-divinylbenzene with Crosslink)

  • 박성규;김준태;노기환
    • 환경위생공학
    • /
    • 제17권1호
    • /
    • pp.63-68
    • /
    • 2002
  • 질소 주입하에 스틸렌과 디비닐벤젠의 양을 조절하면서 1%, 2% 및 5%의 가교도를 가진 공중합체를 합성하고 여기에 염화아연을 첨가하였다. 벤젠을 넣고 팽윤 시킨 다음 톨루엔 용매에서 요드화 칼륨과 21.93g의 1-aza-15-crown-5를 가하고 $55^{\circ}C$로 30시간 교반 환류하여 중감속 이온을 흡착 할 수 있는 기능성 수지를 합성하였다. 이들 수지는 가교도가 증가할수록 디비닐벤젠 함량이 증가하여 다공도가 작아져서 염소의 함량이 감소되고 이것이 치환 과정에서 거대고리 리간드에 영향을 주어 질소의 함량도 감소되었다. 그리고 기능성 합성수지의 형태는 수소와 염소 원자의 치환 반응으로 찌그러짐을 볼 수 있었다.

1-Aza-15-Crown-5-Styrene (위험물)-DVB 수지에 의한 희토류 금속 이온들의 흡착 특성 (Adsorption Characteristic of Rare Earth Metal Ions on 1-Aza-15-Crown-5-Styrene (Hazardous Materials)-DVB Resin)

  • 노기환;김관천;김선화;김준태
    • 공업화학
    • /
    • 제20권1호
    • /
    • pp.21-27
    • /
    • 2009
  • 1%, 2%, 5% 및 20%의 가교도를 가진 스타이렌(제4류 위험물) 디비닐벤젠 공중합체에 1-aza-15-crown-5 거대고리 리간드를 치환반응으로 결합시켜 수지를 합성하였으며, 이들 수지의 특성은 염소 함량, 원소 분석, 열 중량 분석, 비표면적(BET), 그리고 적외선 분광법으로 확인하였다. 수지 흡착제에 대한 금속 이온의 흡착에 미치는 pH, 시간, 수지의 가교도 그리고 용매의 유전상수에 따른 영향들을 조사한 결과 금속 이온들은 pH 3 이상에서 큰 흡착율을 보였으며, 금속 이온들의 흡착 평형은 2 h 정도였다. 한편, 에탄올 용매에서 수지에 대한 흡착 선택성은 우라늄($UO_2^{2+}$) > 망간 ($Mn^{2+}$) > 프라세듐($Pr^{3+}$) 이온이었고, 금속 이온의 흡착력은 1%, 2%, 5% 및 20%의 가교도 순이며, 용매의 유전상수 크기에 반비례하였다.

Spectrophotometric Study of the Interaction between Tetraethylammonium Halides and Aza-15-crown-5 with I2 and ICl in Acetonitrile Solution

  • Semnani, Abolfazl;Pouretedal, Hamid Reza;Hossein Keshavarz, Mohammad
    • Bulletin of the Korean Chemical Society
    • /
    • 제27권6호
    • /
    • pp.886-892
    • /
    • 2006
  • The interaction between tetraethylammonium chloride (TEACl) with ICl and tetraethylammonium iodide (TEAI) and aza-15-crown-5 (A15C5) with $I_2$ and ICl have been examined spectrophotometrically in acetonitrile solution. The results of TEACl-ICl indicate the formation of $ICl_2$ - through equilibrium reaction. In the case of TEAI-$I_2$ and A15C5-$I_2$, the equilibrium formation of $I_3$ - is confirmed. The interaction of TEAI-ICl begins with the simultaneous production of $I_2$ and IC$I_2$ - (at TEAI/ICl < 0.5) as well as continues with the simultaneous consumption of $I_2$ and formation of I$I_3$ - (at TEAI/ICl > 0.5). Similar behavior is also observed for A15C5-ICl system. However, the changes are seen at A15C5/ICl mole ratios less and more than 0.66. Several equations have been suggested for the formation of detected species. The formation constants of various reactions were evaluated from the computer fitting of the absorbance-mole ratio data. IR spectra of A15C5 and 1:1 A15C5:ICl or A15C5:$I_2$ complexes are compared and the effect of complexation on absorption bands is discussed.

물 소화약제로부터 Cryptand 이온교환수지의 Mg(II), Al(III) 및 Pb(II) 흡착특성 (Adsorption Characteristic of Mg(II), Al(III), Pb(II) Metal Ions on Cryptand Ion Exchange Resin from Water Fire Extinguishing Agent)

  • 김준태;김관천
    • 환경위생공학
    • /
    • 제23권1호
    • /
    • pp.57-65
    • /
    • 2008
  • Resins were synthesized with 1-aza-15-crown-5 macrocyclic ligand attached to styrene(dangerous matter) divinylbenzene(DVB) copolymer with crosslink of 1, 2, 6 and 15% by substitution reaction. The synthesis of these resins was confirmed by content of chlorine, element analysis, and IR-spectrum. The effects of pH, time and crosslink on adsorption of metal ion from water fire extinguishing agent by the synthetic resin adsorbent were investigated. The metal ion was showed fast adsorption on the resins above pH 3. The optimum equilibrium time for adsorption of metallic ions was about two hours. The adsorption selectivity determined in water was in increasing order of $Mg^{2+}>Al^{3+}>Pb^{2+}$. The adsorption was in the order of 1, 2, 6, and 15% crosslink resin.

Cryptand 합성수지에 위한 금속 이온들의 흡착 (Adsorption of Metal Ions on Cryptand Synthetic Resin)

  • 이치영;김준태
    • 환경위생공학
    • /
    • 제20권4호통권58호
    • /
    • pp.38-44
    • /
    • 2005
  • Cryptand resins were synthesized with 1-aza-15-crown-5 macrocyclic ligand attached to styrene divinylbenzene (DVB) copolymer with crosslink of $1\%,\;2\%,\;5\%\;and\;10\%$ by substitution reaction. The synthesis of these resins was confirmed by content of chlorine, element analysis, and IR-spectrum. The effects of pH, time, dielectric constant of solvent and crosslink on adsorption of uranium$(UO_2^{2+})$ ion were investigated. The uranium ion was showed fast adsorption on the resins above pH 3. The optimum equilibrium time for adsorption of metallic ions was about two hours. The adsorption selectivity determined in ethanol was in increasing order uranium$(UO_2^{2+})$ > zinc$(Zn^{2+})$ > samarium$(Sm^{3+})$ ion. The adsorption was in order of $1\%>2\%>5\%>10\%$ crosslink resin and adsorption of resin decreased in proportion to order of dielectric constant of solvents.

Cryptand 이온교환 수지를 이용한 우라늄(VI) 이온의 흡착 (Adsorption of Uranium(VI) Ion Utilizing Cryptand Ion Exchange Resin)

  • 박성규;김준태
    • 분석과학
    • /
    • 제17권2호
    • /
    • pp.91-97
    • /
    • 2004
  • 1%, 2%, 5% 및 10%의 가교도를 가진 스틸렌 디비닐벤젠 공중합체에 1-aza-15-crown-5 거대고리 리간드를 치환반응으로 결합시켜 cryptand 이온교환 수지들을 합성하였다. 이들 수지의 합성은 염소 함량과 원소 분석 그리고 IR-스펙트럼으로 확인하였다. 우라늄 ($UO{_2}^{2+}$) 이온의 흡착에 미치는 pH, 시간, 수지의 가교도 그리고 용매의 유전상수에 따른 영향들을 조사하였다. 우라늄 이온은 pH 3 이상에서 큰 흡착율을 보였으며, 금속 이온들의 흡착 평형은 2시간 정도였다. 한편, 에탄올 용매에서 수지에 대한 흡착 선택성은 우라늄 ($UO{_2}^{2+}$), 마그네슘 ($Mg^{2+}$), 네오디뮴 ($Nd^{3+}$) 이온이었고, 우라늄 이온의 흡착력은 1%, 2%, 5% 및 10%의 가교도순 이었으며, 용매의 유전상수 크기에 반비례하였다.

Styrene 위험물을 포함한 합성수지 흡착제에 의한 우라늄(VI) 이온의 흡착 (Adsorption of Uranium (VI) Ion on Synthetic Resin Adsorbent with Styrene Hazardous Materials)

  • 김준태
    • 공업화학
    • /
    • 제20권2호
    • /
    • pp.165-171
    • /
    • 2009
  • 1%, 2%, 8% 및 16%의 가교도를 가진 스타이렌(제4류 위험물 중 제2석유류) 디비닐벤젠 공중합체에 1-aza-15-crown-5 거대고리 리간드를 치환반응으로 결합시켜 수지를 합성하였으며, 이들 수지의 특성을 염소 함량, 원소 분석, 열 중량 분석, 비표면적(BET), 그리고 적외선 분광법으로 확인하였다. 수지 흡착제에 대한 금속 이온의 흡착에 미치는 pH, 시간, 수지의 가교도 그리고 용매의 유전상수에 따른 영향들을 조사한 결과 금속 이온들은 pH 3 이상에서 큰 흡착율을 보였으며, 금속 이온들의 흡착 평형은 2 h 정도였다. 한편, 에탄올 용매에서 수지에 대한 흡착 선택성은 우라늄$(UO_2^{2+})$ > 납$(Pb^{2+})$ > 크롬$(Cr^{3+})$ 이온이었고, 금속 이온의 흡착력은 1%, 2%, 8% 및 16%의 가교도 순이며, 용매의 유전상수 크기에 반비례하였다.

질소-주게 합성수지를 이용한 U(VI), Ca(II) 및 Lu(III) 금속 이온들에 관한 연구 (A Study on the U(VI), Ca(II) and Lu(III) Metal Ions Utilizing Nitrogen-Donator Synthetic Resin)

  • 정만태
    • 환경위생공학
    • /
    • 제15권1호
    • /
    • pp.25-33
    • /
    • 2000
  • 1%, 2%, 10%, 및 20%의 가교도를 갖는 클로로메틸화된 1,4-divinyl benzene에 1-aza-15-crown-5 거대고리 ligand를 치환반응으로 결합시키고, 이들 수지로부터 흡착에 미치는 pH, 시간, 수지의 가교도 그리고 용매의 유전상수 크기에 따른 흡착특성을 조사하였다. 금속이온들은 pH 4 이상에서 우라늄과 칼슘 이온들은 루테튬 이온보다 큰 흡착률을 보였으며, 금속이온들의 흡착 평형시간은 약 2 시간이었다. 한편, ethanol 매질에서의 흡착선택성은 $UO_2^{2+}>Ca^{2}>Lu^{3+}$ 이었고, 흡착력은 1%, 2%, 10%, 20%의 가교도 순 이었으며, 용매의 유전상수(물 : 78.54, 메탄올 : 32.63, 에탄올 : 24.30) 크기에 반비례하였다. 컬럼에서 1%의 가교도를 가진 수지와 금속이온들을 흡착시킨 후 용리액으로 pH2.5 $HNO_3$을 사용하여 각각 분리할 수 있었다.

  • PDF