• Journal of Electrical Engineering and Technology
• /
• 제7권2호
• /
• pp.184-192
• /
• 2012

The torque and unbalanced magnetic forces in permanent magnet machines are resultants of the tangential, axial and normal magnetic forces, respectively. Those are in general influenced by pole-teeth-winding configuration. A study of the torque and unbalanced magnetic forces of a small flux concentrating permanent magnet transverse flux machine (FCPM-TFM) in segmented compact structure is presented in this paper. By using FLUX3D software from Cedrat, Maxwell stress tensor has been solved. Finite element (FE-) magneto static study followed by transient analysis has been conducted to investigate the influence of unsymmetrical winding pattern, in respect to the rotor, on the performance of the FCPM-TFM. Calculating the magnetic field components in the air gap has required an introduction of a 2D grid in the middle of the air gap, whereby good estimations of the forces are obtained. In this machine, the axial magnetic forces reveal relatively higher amplitudes compared to the normal forces. Practical results of a prototype motor are demonstrated through the analysis.

• 대한기계학회논문집A
• /
• 제32권1호
• /
• pp.7-12
• /
• 2008

The vacuum interrupter (VI) is used for medium-voltage switching circuits due to its abilities and advantages as a compacted environmental friendly circuit breaker. In general, the application of a sufficiently strong axial magnetic field (AMF) permits the arc to be maintained in a diffused mode to a high-current vacuum arc. A full understanding of the vacuum arc physics is very important since it can aid to improve the performance of vacuum interrupter. In order to closely examine the vacuum arc phenomena, it is necessary to predict the magnetohydrodynamic (MHD) characteristics by the multidisciplinary numerical modeling, which is coupled with the electromagnetic and hydrodynamic fields, simultaneously. In this study, we have investigated the effect of changing geometrical parameters for electromagnetic behaviors of high-current vacuum arcs with two different types of AMP contacts, which are coil-type and cup-type, using a commercial finite element analysis (FEA) package, ANSYS. The present results are compared with those of MAXWELL 3D, a reliable electromagnetic analysis software, for verification.

• KIEE International Transaction on Electrical Machinery and Energy Conversion Systems
• /
• 제4B권1호
• /
• pp.6-11
• /
• 2004

The single phase switched reluctance motor (SRM) has many merits; simple structure and driving circuits, easy operation and speed control, and etc. This paper presents the torque characteristics of disk type single phase SRM by changing the salient pole lengths and pole arcs. The prototype single phase SRM has a three dimensional magnetic flux pattern because of its structure. That is, the radial and axial magnetic flux contributes to torque generation. Thus, 3D analysis is required for computation of its magnetic field. In this paper, 3D FEM is used for analyzing the magnetic flux distribution and magnetic co-energy.

• 한국결정성장학회지
• /
• 제6권1호
• /
• pp.1-10
• /
• 1996

초크랄스키법에 의한 8언치 실리콘 단결정 성장시 커스프자장의 영향에 관한 수치 해석적 연구를 행하였다. 액상실리콘의 유동에 대한 모렐은 저레이놀즈수 모렐을 사용하였다. 대칭커스프자장은 유션의 강도를 감쇄하였고, 특히 도가니 벽면 근처에서의 유동의 감쇄효과가 현저하였다. 결정으로 혼업되는 산소의 농도는 인가되는 커스프자장의 증가에 따라 감소하였다. 그리고, 결정으로 혼업되는 산소농도의 균일성은 향상되었다. 비대칭커스프 자장은 결정으로 혼 입되는 산소의 농도를 중가시켰지만, 반경방향의 산소농도의 분포는 일정하게 유지되었다. 대칭 과 비대청 커스프자장의 적절한 조합을 행하면 축방향으로 일정한 산소의 분포를 갖는 적절한 조업조건이 도출될 것으로 예상된다.

• Structural Engineering and Mechanics
• /
• 제24권6호
• /
• pp.699-707
• /
• 2006

In the paper, a direct method of solution of the Navier equation is presented. An orthotropic thick hollow cylinder under a one-dimensional steady-state temperature distribution and a uniform magnetic field with general types of thermal and mechanical boundary conditions is considered. The Navier equation in terms of displacement is derived and solved analytically by the direct method, and magnetothermoelastic responses and perturbation of the magnetic field vector in the orthotropic thick hollow cylinder is described. The present method is suitable for orthotropic thick hollow cylinders placed in an axial magnetic field with arbitrary thermal and mechanical boundary conditions. Finally, numerical examples are carried out and discussed.

• 지구물리와물리탐사
• /
• 제23권2호
• /
• pp.67-71
• /
• 2020

이 논문에서는 축 방향 대칭성을 가지는 원통형 이상체에 대한 자력 변화율 텐서의 해석해를 유도하였다. 일정한 방향으로 자화된 원통형 이상체에 대한 3성분 벡터 자력 반응식을 기존 연구에서 이미 유도하였으므로, 이를 직교좌표계에서 각 축 방향으로 미분하여 자력 변화율 텐서 반응식을 유도하였다. 원통형 이상체가 가지는 축 방향 대칭성 때문에 벡터 자력 반응식은 원통 좌표계의 변수를 포함한 식으로 표현되어 있으므로 직교 좌표계와 원통 좌표계 사이의 변수 미분 관계를 적용하여 자력 변화율 텐서를 유도하였다.

• Journal of Magnetics
• /
• 제22권2호
• /
• pp.333-343
• /
• 2017

A rotating magnetic field (RMF) ${\Phi}_1-{\Phi}_2$ model was developed in consideration of the skin effect. The rotating magnetic field's induced three-dimensional flow was simulated numerically, and the influence of the skin effect was investigated. The rotating magnetic field drives the rotating convection in the azimuthal direction, and a secondary convection appears in the radial-meridional direction. The results indicate that ignoring the skin effect results in a smaller azimuthal velocity component and larger radial and axial velocity components, and that the deviation becomes more obvious with the larger dimensionless shielding parameter K.

• 한국우주과학회:학술대회논문집(한국우주과학회보)
• /
• 한국우주과학회 2008년도 한국우주과학회보 제17권2호
• /
• pp.22.2-22.2
• /
• 2008

Radio and X-ray observations of radio lobes in galaxy clusters indicate large energies stored in the magnetic fields in the radio lobes. These magnetic fields are undoubtedly produced and amplified by the accretion onto the central supermassive black hole. I review recent progress and remaining problems in our understanding of the ways how these magnetic fields can be produced and amplified in the accretion disks and what can be the limiting strength of the magnetic field. The major remaining issue is how ordered magnetic spirals (or jets) can emerge from the turbulent small scale magnetic fields produced by MRI. Another issue is the ratio of the axial to the azimuthal magnetic field in jets.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1992년도 하계학술대회 논문집 B
• /
• pp.949-951
• /
• 1992

A low pressure DC plasma jet has been used to obtain diamond films from a mixture of $CH_4$ and $H_2$ with high deposition rate (>1$\mu\textrm{m}$/min). The effects of the deposition conditions such as torch geometry, substrate temperature, gas mixing ratio, chamber pressure, axial magnetic field on the diamond film properties such as morphology, purity, uniformity of the film and deposition rate, etc. have been examined with the aid of Scanning Electron Microscopy, X-Ray Diffraction, and Raman Spectroscopy. Both the growth rate and particle size increased rapidly for low methane concentrations but saturated and the morphology changed from octahedral to cubic structure when the concentration exceeded 1.0 %. Higher growth rates (>1.5${\mu}m$/min) can be obtained by applying an axial magnetic field to the DC plasma jet. Diamond obtained from the magnetized plasma jet also shows a sharp peak at 1332.5$cm^{-1}$ in the Raman Spectra and this result implies that higher growth rate with a good quality diamond films can he obtained by applying an external magnetic field to the plasma jet.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2015년도 추계학술대회 논문집
• /
• pp.217-218
• /
• 2015

Two axial flux permanent magnet (AFPM) machines using soft magnetic composite (SMC) and lamination steel are studied. Generally stator cores of AFPM machines are manufactured using SMC because AFPM machines need 3 dimensional core structures. However, SMC cores have very disadvantages in magnetic properties. Especially permeability value is much lower than that of lamination steel, so magnetic field density is also lower. In terms of core losses, SMC cores have much larger loss values than lamination steel cores because SMC core can't be laminated. In this study, AFPM machine was designed using laminated steel, and iron losses in two machines using SMC and laminated steel were studied. Simulations were carried out by a commercial 3-D FEM tool.