• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.6
• /
• pp.103-108
• /
• 2020

Generally, the cargo tank of LPG carriers corresponds to an independent tank Type A defined by the International Maritime Organization (IMO). The outside of the tank is insulated by polyurethane foam, and the tank is made of expensive low temperature steel that can withstand temperatures as low as -50℃. The cargo tank is composed of outer shell plates, bulkheads, stiffeners, web frames, and stringers. Among them, the outer shell plates, bulkheads, and stiffeners can be designed without structural analysis by the Classification Rules and are constructed easily through optimal design. On the other hand, optimal design, including numerous structural analysis, is not performed because web frames and stringers should be designed and approved through structural analysis. Only adequate design, which determines the design dimensions through several dozen structural analysis, is performed. In this study, for finite element analysis, eight loading conditions were applied, and the deformation of the entire ship for each loading condition was considered. The minimum weight design was performed for the web frames of cargo tanks in the 82,000 ㎥ LNG carrier through the gradient-based optimization technique, and the weight was reduced by approximately 108 tons per ship.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.43 no.6 s.348
• /
• pp.23-29
• /
• 2006

It is difficult to apply conventional security algorithms to the wireless sensor networks composed of nodes that have resource constraints such as memory, computing, power resources limitation. Generally, shared key based algorithms with low resource consumption and short key length are used for broadcast packets in authentication of base station. But it is not suitable that all the nodes hold the same shared key only for packet authentication. Recently, broadcast authentication algorithm for sensor network is proposed, which uses key chain generation by one-way hash function, Message Authentication Code generation by each keys of the key chains and delayed key disclosure. It provides suitable authentication method for wireless sensor networks but may leads to inefficient consequence with respect to network conditions such as broadcast ratio, key chain level, and so on. In this paper, we propose an improved broadcast authentication algorithm that uses key chain link and periodical key disclosure. We evaluated the performance of proposed algorithm using TOSSIM(TinyOS Simulator) in TinyOS. The results show that the proposed algorithm ensures low authentication delay, uses memory and computing resource of receiving nodes efficiently and reduces the amount of packet transmitting/receiving.

• Journal of Advanced Navigation Technology
• /
• v.20 no.4
• /
• pp.321-328
• /
• 2016

Typical MLC NAND flash devices are considered less reliable than SLC NAND flash devices. Although raw bit error rate (RBER) of MLC flash had been considered approximately 1000times or more higher than that of SLC flash, recent research conducted on Google's data center shows that it is much lower than such expectation. Based on the research, we devised In Drive Data Duplication (IDDD) scheme that efficiently exploit MLC flash's sufficient capacity to improve its data reliability without structural complexity increment using SSD intrinsic firmware layer, and showed the data reliability expectation of MLC flash could be significantly higher than that of SLC flash from measured and calculated error rates. Even though RBER of SLC flash was lower than that of MLC flash in 44 out of 48 cases we studied, applying IDDD scheme, RBER of MLC flash was became lower than that of SLC in all 48 cases and uncorrectable bit error rate (UBER) of MLC flash was became lower than that of SLC flash in 45 out of 48 cases.

• Journal of Astronomy and Space Sciences
• /
• v.25 no.4
• /
• pp.435-444
• /
• 2008

High energy charged particles are trapped by geomagnetic field in the region named Van Allen Belt. These particles can move to low altitude along magnetic field and threaten even low altitude spacecraft. Space Radiation can cause equipment failures and on occasions can even destroy operations of satellites in orbit. Sun sensors aboard Science and Technology Satellite (STSAT-l) was designed to detect sun light with silicon solar cells which performance was degraded during satellite operation. In this study, we try to identify which particle contribute to the solar cell degradation with ground based radiation facilities. We measured the short circuit current after bombarding electrons and protons on the solar cells same as STSAT-1 sun sensors. Also we estimated particle flux on the STSAT-l orbit with analyzing NOAA POES particle data. Our result clearly shows STSAT-l solar cell degradation was caused by energetic protons which energy is about 700keV to 1.5MeV. Our result can be applied to estimate solar cell conditions of other satellites.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.42 no.8 s.338
• /
• pp.35-42
• /
• 2005

This paper describes novel flip-flops with improved robustness and reduced power consumption. Variable sampling window flip-flop (VSWFF) adjusts the width of the sampling window according to input data, providing robust data latching as well as shorter hold time. The flip-flop also reduces power consumption for higher input switching activities as compared to the conventional low-power flip-flop. Clock swing-reduced variable sampling window flip-flop (CSR-VSWFF) reduces clock power consumption by allowing the use of a small swing clock. Unlike conventional reduced clock swing flip-flops, it requires no additional voltage higher than the supply voltage, eliminating design overhead related to the generation and distribution of this voltage. Simulation results indicate that the proposed flip-flops provide uniform latency for narrower sampling window and improved power-delay product as compared to conventional flip-flops. To evaluate the performance of the proposed flip-flops, test structures were designed and implemented in a $0.3\mu m$ CMOS process technology. Experimental result indicates that VSWFF yields power reduction for the maximum input switching activity, and a synchronous counter designed with CSR-VSWFF improves performance in terms of power consumption with no use of extra voltage higher than the supply voltage.

• Journal of IKEEE
• /
• v.19 no.3
• /
• pp.415-423
• /
• 2015

The DO-178C guide, which is referenced as the software development guide when a certification of the airworthiness in the commercial airplane is acquired by FAA in US, is recently referenced for the local military aircraft airworthiness. This indicates that when the auditor of the military aircraft airworthiness looks over the software development documents, the auditor reviews if all of the documents are verified in accordance with the DO-178C guide. However, when we developed the military aircraft intercom, We developed its control software in accordance with the CMMI level 3, since there were no requirements for the compliance of the DO-178C guide. Therefore, When we consider the airworthiness of this intercomm system, The analysis for how much the software development based on the CMMI level 3 is different from the DO-178C guide is needed to prepare the essential software documents additionally. Thus, This study analyzes the differences between CMMI level 3 and DO-178C guide and provides that which data on the CMMI level 3 is necessary for the compliance of the aircraft airworthiness comparing with the DO-178C. The analyzed result can be applied at the software development of the other military aircraft avionics equipment based on the CMMI model environment considering the compliance of the military aircraft airworthiness.

• The Korean Journal of Air & Space Law and Policy
• /
• v.28 no.2
• /
• pp.97-115
• /
• 2013

The world-wide principal criteria of aircraft operations is ICAO Annex 6. Operations of Aircraft. Among ICAO Annex 6, Part I is for International Commercial Air Transport - Aeroplanes and it assumes major part of civil aviation. ICAO has been providing Contracting States with SARPs(Standards and Recommended Practices) and monitor each State's reflection degree into their domestic air law, so-called USOAP(Universal Safety Oversight Audit Program). Current ICAO USOAP is Snap-shot method, but it will be changed to USOAP-CMA method from the year of 2013. ICAO USOAP results have overall effects on national aviation industry such as routes, insurance, airlines cooperation and so forth. Low grades of results attract international attention and that leads to flag carrier's operation stoppage, route restriction, airlines cooperation restriction, insurance increase directly or indirectly. Thus it is important to get excellent grades in ICAO USOAP and to maintain confidence. Our government ranked top to get 98.89 grades in 2008 ICAO USOAP but after 2008 the revised provisions have not been reflected sufficiently into our air law. So I would like to grip reflection ratio of ICAO Annex 6 Part I into our domestic air law by using the most updated revised edition on this paper. Together I would like to suggest alternatives for the non-reflected and partially reflected.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.42 no.12
• /
• pp.9-16
• /
• 2005

A new online routing algerian is proposed in this paper, which use the interference-prediction to solve the network congestion originated from extension of Internet scope and increasing amount of traffic. The end-to-end QoS has to be guaranteed in order to satisfy service level agreements (SLAs) in the integrated networks of next generation. For this purpose, bandwidth is allocated dynamically and effectively, moreover the path selection algorithm is required while considering the network performance. The proposed algorithm predicts the level of how much the amount of current demand interferes the future potential traffic, and then minimizes it. The proposed algorithm considers the bandwidth on demand, link state, and the information about ingress-egress pairs to maximize the network performance and to prevent the waste of the limited resources. In addition, the interference-prediction supports the bandwidth guarantee in dynamic network to accept more requests. In the result, the proposed algorithm performs the effective admission control and QoS routing. In this paper, we analyze the required conditions of routing algorithms, the aspect of recent research, and the representative algorithms to propose the optimized path selection algorithm adequate to Internet franc engineering. Based on these results, we analyze the problems of existing algorithms and propose our algorithm. The simulation shows improved performance by comparing with other algorithms and analyzing them.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.3
• /
• pp.94-100
• /
• 2021

To improve the productivity of cargo containment construction for a membrane LNG carrier, it is important to shorten the installation period and process of the scaffolding system, which is a construction workbench of a cargo containment for a membrane LNG carrier. As an effective method, opinions are being gathered to enlarge the lifting unit from the existing two stages to eight stages. On the other hand, the stresses around the pin and hole will increase significantly because of the increase in lifting load according to the large size of the module. The purpose of this study was to establish a new large module-lifting plan by introducing TRIZ to solve these problems. This study adopted a method to utilize 40 inventive principles, which is one of the various problem-solving tools of TRIZ. First, technical contradictions were derived, the engineering parameters were selected. Second, efficient inventive principles were selected to overcome the technical contradictions using a contradiction matrix. Finally, the general and specific solutions were derived through the selected inventive principle, and structural analysis confirmed that the stress generated in the structure was low. The utility of TRIZ was confirmed by the successful lifting of large modules using the established lifting method.

• Journal of the Korea Society of Computer and Information
• /
• v.27 no.8
• /
• pp.77-84
• /
• 2022

In this paper, we propose a system for monitoring air pollutants such as fine dust using an unmanned aerial vehicle capable of autonomous navigation. The existing air quality management system used a method of collecting information through a fixed sensor box or through a measurement sensor of a drone using a control device. This has disadvantages in that additional procedures for data collection and transmission must be performed in a limited space and for monitoring. In this paper, to overcome this problem, a GPS module for location information and a PMS7003 module for fine dust measurement are embedded in an unmanned aerial vehicle capable of autonomous navigation through flight information designation, and the collected information is stored in the SD module, and after the flight is completed, press the transmit button. It configures a system of one-stop structure that is stored in a remote database through a smartphone app connected via Bluetooth. In addition, an HTML5-based web monitoring page for real-time monitoring is configured and provided to interested users. The results of this study can be utilized in an environmental monitoring system through an unmanned aerial vehicle, and in the future, various pollutants measuring sensors such as sulfur dioxide and carbon dioxide will be added to develop it into a total environmental control system.