• 대한치과보철학회지
• /
• 제29권1호
• /
• pp.39-52
• /
• 1991

The purpose of this study were to compare the condylar path and the anterior angle of glenoid fossae, and analyze the condylar path, and classify the patterns of condylar path. Thirty-three male and female dental students with normal occlusion and masticatory system ranging in age from 24 to 27, without present symptoms and any history of TM joint disturbance, were selected for this study. Then, sixty-six TM joint were examed. Transcranial radiographs of TM joint and Cephalometric radiographs under mandibular protrusive movement were obtained. They were taken at six positions on protrusive movement. The results obtained were as follows : 1. The sequence of the frequeny of condylar movement patterns were concave curve, "S"shape curve, convex curve, and reverse "S"shape. 2. The horizontal distance of the greatest changed position of condylar angle averaged 2.6mm. 3. The condylar path angle averaged 36.91 degree. 4. The angle of the anterior slope of glenoid fossae averaged 37.28 degree. 5. The distance fo condylar movement averaged 5.98mm and the distance of condylar horizontal movement averaged 4.71mm. 6. The slope of articular eminence was correlated to the condyalr path and three were no significant differences between right and left side of the anterior slope of articular eminence, and the condyalr path angle.

• Journal of the Korean Statistical Society
• /
• 제17권2호
• /
• pp.121-133
• /
• 1988

In this paper a class of mixture designs for estimating the slope of second order Scheffe polynomial response surfaces for mixture experiments with q components is presented. The variance of the estimated directional slope at a point is a function of the direction of the slope and the design. If the variance is averaged over all possible directions in the (q-1)-dimensional simplex, the averaged variance is only a function of the point and the design. By choice of design, it is possible to make this variance constant for all points equidistant from the centroid point. This property is called "slope-rotatability over al directions in the simplex", and the necessary and sufficient conditions for mixture design to have this property are given and proved. The class of designs with this property is compared with other mixture designs and discussed.discussed.

• 대한치과보철학회지
• /
• 제30권3호
• /
• pp.321-337
• /
• 1992

The objective of this study was to compare the condylar path and the anterior angle of articular fossa and to analyze the pattern of condylar path in edentulus patients. Nineteen male and female edentulous patients with normal masticatory system ranging in age 42 to 78, without present symptoms and any history of TMJ disturbance were selected for this study. On the computer analysis on the transcranial radiographs of the TMJ, the angle of slope of articular eminance and condylar path to the Frankfort Horizontal Plane and the height of glenoid fossa was measured respectively, and stuied their interrelationship comparatively. Obtained results were asfollows. 1. The angle of the slope of articular eminence averaged 37.28 degree. and there was no significant difference between the right and left side. 2. The condylar path angle averaged 29.05 degree and there was no significant difference between the right and left side. 3. The height of the glenoid fossa averaged 8.11 mm and there was no significant difference between the right and left side. 4. The sequence of the frequence of condylar movement patterns were concavex curve(39.5% ), 'S' shape curve(34.2%), reverse 'S' shape(15.8%) and convex curve(10.5%). 5. The horizontal distance of the point of the changed curve of the condylar path averaged 2.91 mm. 6. The height of glenoid fossa was highly correlated to the slope of articular eminence and relatively highly correlated to tile condylar path and the condylar path was closely correlated to the slop of articular eminence.

• 품질경영학회지
• /
• 제14권1호
• /
• pp.26-32
• /
• 1986

A class of multi-factor designs for estimating the slope of second order response surfaces is presented. For multi-factor designs the variance of the estimated slope at a point is a function of the direction of measurement of the slope and the design. If we average the variance over all possible directions, the averaged variance is only a function of the point and the design. By choice of design, it is possible to make this variance constant for all points equidistant from the design origin. This property is called "slope-rotatability over all directions", and the necessary and sufficient conditions for a design to have this property are given and proved. The class of design with this property is mainly discussed.

• Journal of the Korean Statistical Society
• /
• 제8권1호
• /
• pp.37-64
• /
• 1979

Criteria and designs are developed for estimating derivatives of P-variable second order polynomial response surfaces. The basic criterion used is mean square error of the estimated derivative, averaged over all directions and then averaged over a region of interest. A new design concept called slope-rotatability is introduced. A simplex optimization program is used to find minimum mena square error designs for the two variable case for $6 \leq N \leq 12$.

• Wind and Structures
• /
• 제4권2호
• /
• pp.119-130
• /
• 2001

The paper addresses the suitability of wind pressure coefficients specified in contemporary design standards and codes of practice for gable roofs of intermediate slope (roof angle $10^{\circ}-30^{\circ}$). In a recent research study, a series of low building models with different roof slopes in this intermediate range were tested in a boundary layer wind tunnel under simulated open country terrain conditions. This was different from the original study in the 70's, which produced the current provisions on the basis of a model tested only for a single roof slope (4:12) in this range. The results of the study suggest that a modification to the American wind provisions would be warranted to make them more representative of the true local and area-averaged wind loads imposed on gable roofs of intermediate slope.

• Journal of Electrical Engineering and Technology
• /
• 제2권2호
• /
• pp.274-279
• /
• 2007

This study focuses on the enhancement of maskless photolithography as well as the peptide synthesis application with single crystalline silicon micromirrors. A single crystalline silicon micromirror array has been designed and fabricated in order to improve its application to the peptide synthesis. A micromirror rotates about ${\pm}\;9^{\circ}$ at the pull-in voltage, which can range from 90.7 V to 115.1 V. A $210\;{\mu}m-by-210\;{\mu}m$ micromirror device with $270\;{\mu}m$ mirror pitch meets the requirements of an adequately precise separation for peptide synthesis. Synthetic 16 by 16 peptide array corresponds to the same number of micromirrors. The large size of peptide pattern and the separation facilitate biochip experiments using fluorescence assay. The peptide pattern has been synthesized on the GPTS-PEG200 surface with BSA-blocking and thereupon the background was acetylated to reject non-specific bindings. Hence, an averaged slope at the pattern edge has been distinguishably improved in comparison to patterning results from an aluminum micromirror.

• 한국환경과학회지
• /
• 제21권6호
• /
• pp.725-738
• /
• 2012

Recently, a variety of GIS-based tools enabling to generate topographic parameters for hydrologic and hydraulic researches have been developed. However, most of GIS-based tools are usually insufficient to estimate and visualize river channel slopes especially along the river network, which can be possibly utilized for many hydraulic equations such as Manning's formula. Many existing GIS-based tools have simply averaged cell-based slopes for the other advanced level of hydrologic units as likely as the mean watershed slope, thus that the river channel slope from the simple approach resulted in the inaccurate channel slope particularly for the mountain region where the slope varies significantly along the downstream direction. The paper aims to provide several more advanced GIS-based methodologies to assess the river channel slopes along the given river network. The developed algorithms were integrated with a newly developed tool named RiverSlope, which adapted theoretical formulas of river hydraulics to calculate channel slopes. For the study area, Han stream in the Jeju island was selected, where the channel slopes have a tendency to rapidly change the upstream near the Halla mountain and sustain the mild slope adjacent to watershed outlet heading for the ocean. The paper compared the simple slope method from the Arc Hydro, with other more complicated methods. The results are discussed to decide better approaches based on the given conditions.

• Wind and Structures
• /
• 제31권4호
• /
• pp.351-362
• /
• 2020

In this study, the impact of roof slope on the flow characteristics over low-sloped gable roofs was investigated using steady computational fluid dynamics (CFD) simulations based on a k-ω SST turbulence model. A measurement database of the flow field over a scaled model of 15° was created using particle image velocimetry (PIV). Sensitivity analyses for the grid resolutions and turbulence models were performed. Among the three common Reynolds-averaged Navier-Stokes equations (RANS) models, the k-ω SST model exhibited a better performance, followed by the RNG model and then the realizable k-ε model. Next, the flow properties over the differently sloped (0° to 25°) building models were determined. It was found that the effect of roof slope on the flow characteristics was identified by changing the position and size of the separation bubbles, 15° was found to be approximately the sensitive slope at which the distribution of the separation bubbles changed significantly. Additionally, it is suggested additional attention focused on the distributions of the negative pressure on the windward surfaces (especially 5° and 10° roofs) and the possible snow redistribution on the leeward surfaces.

• Journal of Electrical Engineering and Technology
• /
• 제12권5호
• /
• pp.1970-1979
• /
• 2017

Ultra Lift Luo Converter (ULC) gained considerable research interest in recent years. The stability analysis of voltage mode and peak current mode controlled ULC in continuous conduction mode is analyzed in this paper. The Eigen value theory is used for the stability analysis of voltage mode controlled ULC. Then to characterize the dynamics of inner current loop, the expressions of closed loop transfer function and loop gain are determined. An algorithm has been developed to analyze the stability of the peak current mode controlled ULC. The theoretical results are correlated with the simulation results obtained using PSIM 9.1(SMARTCTRL 1.0) software. Finally it is proposed to fabricate a prototype and validate the performance by suitable experimental setup.