• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.29 no.6
• /
• pp.399-409
• /
• 2017

This study numerically investigates the characteristics of the velocity field including the average flow velocity, longshore current and turbulent kinetic energy acting as the main external forces of the salient formed behind the permeable submerged breakwaters. Shoreline response is also predicted by the longshore-induced flux. In this paper, a three-dimensional numerical wave tank based on the OLAFOAM, CFD open source code, is utilized to simulate the velocity field around permeable submerged breakwaters under the formation condition of salient. The characteristics of the velocity field around permeable submerged breakwaters with respect to the gap width between breakwaters and the installing position away from the shoreline under a range of regular waves for different wave height are evaluated. The numerical results revealed that as the gap width between breakwaters increases, the longshore currents become stronger. Furthermore, as the gap width becomes narrower, the point where flow converges moves from the center of the breakwater to the head part. As a result, it is possible to understand the formation of the salient formed behind the submerged breakwaters. In addition, it was found that the longshore currents caused by the gap width between breakwaters and the installation position away from the shoreline are closely related to the turbulent kinetic energy.

• Journal of the Korean Wood Science and Technology
• /
• v.44 no.5
• /
• pp.695-704
• /
• 2016

Physical and mechanical properties of Korean red pine wood grown in Anmyeon-do, Taean-gun, Chungcheongnam-do and Sogwang-ri, Uljin-gun, Gyeongsangbuk-do, Korea were measured and each relationships between them were analyzed. The ring width and latewood proportion along radial axis in Korean red pine at two-regions were measured by collecting the growth core of stands with age class V and IX. The ring width in Korean red pine at two-regions decreased with increasing cambium age. The average ring widths in age class V and IX in Anmyeon-do and Sogwang-ri were 2.865 mm, 1.705 mm, 4.764 mm, and 2.228 mm, respectively. The ring widths in Anmyeon-do were measured from 23% to 40% smaller than Sogwang-ri. The latewood proportion was negatively related with the ring width of Korean red pine at two-regions. The relationship between physical and mechanical properties of specimens for compressive and bending strength tests were analyzed with simple regression analysis. The relationship between latewood proportion and oven-dry density were positive and statistically significant. The relationship between latewood proportion and mechanical properties was slightly positive and not statistically significant, except the specimens for bending strength test of Anmyeon-do. The relationship between oven-dry density and mechanical properties was positive. It was just statistically significant in the specimens of Sogwang-ri. The compressive and bending strengths of Anmyeon-do and Sogwang-ri were 51.3 MPa, 80.5 MPa, 37.7 MPa, and 63.7 MPa, respectively. The strength difference between two-regions was determined to due to difference of ring width and latewood proportion by age class.

• Plant Resources
• /
• v.5 no.3
• /
• pp.214-223
• /
• 2002

The objective of this study was to understand the conservation of gene resources and provide information for mass selection' of winter bud characters among the selected populations of Kalopanax septemlobus Koidz using analysis of variance(ANOVA) tests. The obtained results are shown below; 1. Ten populations of K. septemlobus were selected for the study of the variation of winter bud characters in Korea. The results of the analysis of variance(ANOVA) tests shows that there were statistically significant differences in all of the winter bud characters among those populations. 2. Correlation analysis shows that width between Height and DBH(Diameter at breast height) characters have negative relationship with all of the characters, as ABL(Apical branch length), ABW(Apical branch width), AWBL(Apical branch winter bud length), AWBW(Apical branch winter bud width), ABT(Apical branch No. of thorns), ABLB(Apical branch No. of lateral bud) and LBL(Lateral branch length), LBW(Lateral branch width), LBT(Lateral branch No. of thorns), LBLB(Lateral branch No. of lateral bud). 3. The result of principal component analysis(PCA) for winter buds showed that the first principal components(PC' s) to the fourth principal component explains about 78% of the total variation. The first principal component(PC) was correlated with AWBW, LWBW, and LBL and the ratio of ABL/ABW and LBL/LBW out of 16 winter bud characters. The second principal component correlated with ABL, ABW, ABLB, LWBL(Lateral branch winter bud length), and LBW and the ratio of AWBL/AWBW. The third principal component correlated with ABL, ABW, LWBL, LBL, and the ratio of LBL/LBW. The fourth principal component correlated with LBL and the ratio of LWBL/LWBW(Lateral branch winter bud width), LBL/LBW. Therefore, these characters were important to analysis of the variation for winter bud characters among selected populations of K. septemlobus in Korea. 4. Cluster analysis using the average linkage method based on 10 selected populations for the 16 winter bud characters of K. septemlobus in Korea showed a clustering into two groups by level of distance 1.1(Fig. 3). As can be seen in Fig. 3, Group I consisted of three areas(Mt. Sori, Mt. Balwang and Mt. Worak) and Group Ⅱ contisted of seven areas(Suwon, Mt. Chuwang, Mt. Kyeryong, Mt. Kaji, Mt. Jiri, Muan, and Mt. Halla). The result of cluster analysis for winter bud characters corresponded well with principal component analysis, as is shown in Fig. 2.

• Journal of Life Science
• /
• v.8 no.4
• /
• pp.437-442
• /
• 1998

Seed and leaf size is the important morphological traits considered by plant breeder and is the important yield components in soybean. The objective of this research was to know the relationship between seed size and leaf size in 66 $F_2$ populations derived from half diallel mating system with 12 soybean strains, representing distinct seed and leaf size. The range of seed size for 12 parents used was 6.7 to 43.8 g/100 seed. Leaf width leaf length ranged 5.7 to 8.6 cm and 9.4 to 12.9 cm, respectively. Leaf width was highly correlated with leaf length with an R square of 0.754 in the $F_2$ generation. The $F_2$ regression` coefficient indicated that leaves were, on average 1.4 times greater length than in width . Leaf size (width) was highly correlated (r.0.91) with seed size (g/100 seed) in the $F_2$ generation with an R square of 0.833. Our results indicate postive correlation within seed and leaf size is common in $F_2$ segregating populations derived from crossing with soybean. The strong liner relationship we observed between leaf size and seed size in $F_2$ segragating population is useful in that in that indirect selection for a secondary character may be superior to direct selection for the primary character.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.29 no.3
• /
• pp.397-406
• /
• 2002

The purpose of this study was to clarify the palatal arch length, width and volume in the primary and permanent dentition. Samples were consisted of normal occlusion in the primary dentition(50 males and 50 females) and permanent dentition(43 males and 43 females). Their upper plaster casts were used and through 3-dimensional laser scanning(3D Scanner, DS4060, LDI, U.S.A.), cloud data, polygonization, section curve, loft surface and fit and horizontal plane were made for measuring the palatal arch length, width and volume(Surfacer 10.0, Imageware, U.S.A.). Correlation coefficients were calculated separately for males and females in each group(SPSS 10.0). The results were as follows : 1. Average distance from the fit plane to the points(tooth-tooth-palate) was greater in the permanent dentition than those of primary dentition. 2. Palatal volume was greater more than 3 times in the permanent dentition, especially it was greater in male compared to female with significance(p<0.05). 3. Palatal width of male was greater in the primary and permanent dentition but palatal length, only in the permanent dentition than that of female(P<0.05). 4. Correlation coefficients were statistically most significant between the palatal volume and size of posterior palatal width and total palatal length(r=0.401, r=0.450, r=0.678, r=0.654).

• Korean Journal of Cleft Lip And Palate
• /
• v.4 no.2
• /
• pp.51-68
• /
• 2001

Midfacial hypoplasia in patients with clefts of the lip and palate is considered to be the result of congenital dysmorphogenesis. And cleft lip and palate developes facial deformity, jaw abnormality, speech problem, which is most frequent hereditary deformity in maxillofacial region. So cleft lip and palate is characterized by midface deformity which shaws maxillary anterior nasal septal deviation and deformity. Our study describes congenital correlates of midfacial hypoplasia by examining the displacement of a normal complement of parts, a triangular tissue deficiency low on the lip border on the columellar side, and a linear deficiency and displacement in the line of the bilateral cleft lip. 15 patients with bilateral cleft lip and palate were taken impression before operation, but the patient who had other abnormalities and complications were excluded. Average age is 3.4 months and they were classified into both complete, both incomplete and complete & incomplete group. The obtained results were as follows 1. There were no differences on intercanthal width and canthal width between each of the groups. 2. Both complete group had longer lateral ala length than both incomplete group, but there were no differences between both complete group and complete side of com. & incom. group and both incomplete group and incomplete side of com. & incom. group. 3. Columella length was greater in both incomplete group than in both complete group, but there was no difference between both complete group and complete side of com. & incom. group and both incomplete group and incomplete side of com. & incom. group. 4. Both complete group had longer ala width & ala base width than both incomplete group had. But there were no differences between both complete group and complete side of com. & incom. group and both incomplete group and incomplete side of com. & incom. group. 5. There were no differences between each of the groups on upper lip length, but nose/mouth width ratio was greater in both complete group than in both incomplete group. 6. Pronasale(pm), subnasle(sn), la~rale superioris(ls), stomion(sto) points were located around the central vertical line of face but deviated to incomplete side in com. & incom. group. 7. Nasal tip protrusion was greater in both incomplete group and com. & incom. group than both complete group, but there was no difference between both incomplete group and com. & incom. group.

• Tunnel and Underground Space
• /
• v.29 no.5
• /
• pp.346-355
• /
• 2019

When evaluating pillar stability in very closely spaced tunnels, a local safety factor (strength/stress ratio) at the minimum width has been widely used. Tension bolts have been frequently applied as reinforcement for the cases where safety factors are less than 1.0 from FEM stress analysis. However, the local safety factor shows a constant value irrespective of the change in pillar width/tunnel diameter (PW/D) and the safety factor of the pillar is underestimated because the variation of deviation stress is relatively small even when the pre-stressing is applied to the tension bolt. In addition, the average safety factor proposed by Hoek and Brown(1980) was reviewed, but the pillar safety factor was relatively overestimated when the width of the pillar was increased. As an alternative, the SRM safety factor using shear strength reduction method shows the effect of changing the safety factor in the case of no reinforcement and tension bolt reinforcement as the pillar width/tunnel diameter(PW/D) changes. The failure shape is also similar to the previous limit theory result. In this study, the safety factor was evaluated without considering rock bolt and shotcrete to distinguish reinforcing effect of tension bolt.

• The korean journal of orthodontics
• /
• v.25 no.5 s.52
• /
• pp.577-585
• /
• 1995

This study has been performed to determine whether significant differences in the maxillary basal bone pattern exist between skeletal class II malocclusion and normal occlusion. Materials for the skeletal Class III sample consisted of lateral cephalometric roentgenograms and maxillary cast models of 29 adult individuals, 15 males and 14 females. The average age was 19.75 years with a range from 16.4 to 29.1 years. A normal control sample consisted of lateral cephalometric roentgenograms and maxillary cast models of 24 adult individuals, 13 males and 11 females. The average age was 24.25 years with a range from 20.8 to 29.4 years. The results of this study can be summarized and concluded as like follows. 1. In comparing sexual difference of maxillary basal bone morphology in skeletal Class III malocclusion, the following Parameters of males were found to be significally larger than those of females : inter first premolar width, inter molar width, oblique canine height, oblique molar height and maxillary basal bone perimeter. 2. In comparing sexual difference of maxillary basal bone morphology in normal occlusion, the following parameters of males were found to be significally larger than those of females : inter canine width, inter first and second premolar width, inter molar width, oblique canine height and oblique molar height. 3. In comparing maxillary basal bone morphologic difference between skeletal Class III malocclusion md normal occlusion in males, the following parameters were found to be significally larger in normal occlusion : inter canine width, inter canine height, inter molar height, oblique canine height and oblique molar height. 4. In comparing maxillary basal bone morphologic difference between skeletal Class III malocclusion and normal occlusion in females, the following parameters were found to be significally larger in normal occlusion : inter canine height, inter molar height, oblique canine height, oblique molar height and maxillary basal bone perimeter.

• The Korean Journal of Mycology
• /
• v.21 no.1
• /
• pp.16-22
• /
• 1993

Morphological and cultural characteristics of fungi causing rice sclerotial diseases were examined. Hyphal widths of R. solani and R. oryzae were same and ranged $6.0-12.0\;{\mu}m$ with average $9.0\;{\mu}m$, the widest among those of the sclerotial fungi examined. Hyphal width of R. oryzae sativae ranged $6.0-9.0{\mu}m$ with average $7.4{\mu}m$. Hyphal width of R. cerealis was the narrowest among those of Rhizoctonia species examined, and the same was hyphal width of S. oryzae among those of Sclerotium species. Nuclear staining by HCL-Giemsa method showed that R. solani and R. oryzae had many nuclei within one hyphal cell, S. oryzae one nucleus, and the other sclerotial fungi mostly two nuclei. The nuclear number of R. solani was the largest, which ranged 2-17 with average 6.3. Average size of sclerotia of the sclerotial fungi except S. hydrophilum and S. oryzae produced in lesions ranged 1.0-2.0mm. Average size of sclerotia of S. hydrophilum and S. oryzae was 0.5mm and 0.24mm, respectively. Sclerotia of R. solani and R. oryzae produced in culture were more variable in size and larger than those produced in lesions. However, the sclerotial sizes of the other sclerotial fungi produced in culture were almost the same as those produced in lesions. Sclerotial colors of sclerotial fungi produced in lesions were similar to those produced in culture, but sclerotial shapes of some sclerotial fungi exhibited somewhat difference between the sclerotia produced in lesions and in culture. Optimum temperature for mycelial growth of R. cerealis was $23^{\circ}C$, and that of the other sclerotial fungi ranged from $27\;to\;33^{\circ}C$. Maximum temperature for mycelial growth of some sclerotial fungi was as high as $41^{\circ}C$, while that of R. cerealis was as low as $31^{\circ}C$. Minimum temperature for mycelial growth of R. cerealis was $2^{\circ}C$, and that of the other sclerotial fungi ranged from $6\;to\;10^{\circ}C$.

• Journal of the Korean Wood Science and Technology
• /
• v.42 no.4
• /
• pp.385-392
• /
• 2014

The purpose of this study was to determine the effects of plantation thinning on physical and mechanical properties of Larix kaempferi. Tree samples were obtained from unthinned, moderately, heavily thinned plantations where located in Kwangryung forest research stand. The effects of different thinning methods on the bending and parallel to grain compressive strengths of Larix kaempferi were explored. Average latewood ratio with various thinning treatments revealed the trend of unthinning < moderate thinning < heavy thinning treatment. Average annual ring width with various thinning treatments showed the trend of unthinning < moderate thinning or heavy thinning treatment. Average bending and parallel to grain compressive strengths with various thinning treatments revealed the trend of unthinning > moderate thinning > heavy thinning treatment. This indicates that thinning treatment reduces average bending and parallel to grain compressive strength properties.