• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.6 no.2
• /
• pp.110-119
• /
• 1994

Three dimensional characteristics of fluid flow and heat transfer have been studied numerically around the latent heat storage vessel which was applied to the practical ice-storage system. The result obtained indicates that the value of frictional coefficient decreases with decrease of baffle width. For the baffle spacing. $S/H_D=9.375$, baffle height. $H/H_D=0.5$ and various pressure drop, average Nusselt numbers in heat transfer surface are much dependent on the width of side baffle and middle baffle. that is. Nu_m decreases with decrease of the width of middle baffle when the width of side baffle is 4.375, where as the optimum condition of side baffle for $Nu_m$ exists in the range of 3.5< $B_1/H_D$ <4.375 at the width of middle baffle, $B_2/H_D=6.875$.

• Journal of the Korean Home Economics Association
• /
• v.36 no.6
• /
• pp.85-94
• /
• 1998

In this study we tested the physiological influence on human-body according to clothing pressure with reduction rate and varied posture using three kinds of belt with different width. The width of belts were 2.5cm, 3.5cm and 4.5cm, and reduction rates of belts were 0%, 2.5% and 5% of the subject/s waist size respectively. the measured postures were standing state and sitting stste in the chair. The reasults are as follows; 1. Clothing pressure was high in the order of Side part>Front part>Back part and the rate fo change in the side part was highest, according to the reductio rate of belts. The more the width of belt was wide, the less the clothing pressure was small, and this kind of phenomenon could be explained by "The Principle of the power". 2. Both the rate of reduction of belt and the change of average skin temperature in accordance with the width of belt is small, however, the more the width of belts is wider and the reduction rate is bigger, the more the skin temperature at the waist part is increased. 3. The blood pressure and pulse was influenced when the width of belt was narrow and the reduction rate was high. 4. A sense restraining was much influenced by the width of belt, especially when the width of belts was wide, the significant difference was permitted.permitted.

• Journal of the Korea Concrete Institute
• /
• v.22 no.6
• /
• pp.761-768
• /
• 2010

When cracks occur in reinforced concrete structures, a steel carries all tensile force at crack section, while the concrete between cracks carries a part of the tensile force due to bond, so that the steel is less elongated. This is called the tension-stiffening effect, that plays an important role in verification of a serviceability limit state. But it is a complicated work to use a complex strain distribution between cracks, therefore an average strain is used to calculate deflection and crack width. In Eurocode 2, tension-stiffening effect expressed in the first order form or the second order form is used in calculating an average curvature for deflection. In this study for a flexural member deflection and crack width are calculated using various models for the tension-stiffening effect and the results are compared with the values of Eurocode 2 and KCI provisions. As results, the predicted values using the second order form are appeared to be well agreed with the experimental values and it could secure more analytical consistency.

• Journal of the Korean Wood Science and Technology
• /
• v.23 no.3
• /
• pp.58-65
• /
• 1995

The possibilities of the estimation of the moisture content(MC) for sitka-spruce (Picea sitchensis Carr.) by measuring density have been investigated. The method is based on the relationships between the wood density and moisture content of wood expressed by Equations (8)~(9). The purpose of this study is examining the estimation of the moisture content of wood by density and the variation of moisture content with annual ring width of wood. The following conclusions were obtained; 1. This method is very convenience because of the average moisture content of wood can be obtained by a simple estimation. This estimation can be made from the easy measurement of the weight and volume of wood. 2. Coefficient of determination between the experimental MCs and theoretical MCs which is calculated by the oven-dry densities of each specimens and Equations (8), (9) is 0.98. This Correlation is very remarkable. Therefore the model Equations on the estimation of moisture content by wood density was available. 3. Relationship between experimental MCs and theoretical MCs which is estimated by average oven-dry density of total specimens showed positive correlation(Fig.2). But from the Fig.4. we can concluded that the number of specimens is two groups. This phenomenon is considered that the variation of MC by the annual ring width from the specimens' observations. Consequently, the MCs of wood by density, is likely to be successful method. can be estimate using by the average oven-dry densities divided with the annual ring widths of wood.

• Korean Journal of Veterinary Research
• /
• v.22 no.2
• /
• pp.91-98
• /
• 1982

This study was conducted to determine the interrelationship between the weight of various visceral organs and the live weight of Korean native cattle with particular regard to female ones. One hundred and eighty-five of 2 to 6 years and one hundred and fifty-six Korean native cow of over 7 years of age were examined at the Busan slaughter house during the lest quarter of 1979. The results obtained are summarized as follows: 1. The average live weight of 72 years old cows examined was 297.09kg, while these weight of visceral organs such as liver, lung, heart, left kidney, right kidney and spleen being 4301.09, 2165.22, 1355.43, 346.74, 350 and 991.30g, respectively. The length, width and thickness of the spleen were 49.0, 12.92 and 2.95cm, respectively. 2. The average live weight of 3 years old cows examined was 306.56kg, while these weight of visceral organs such as liver, lung, heart, left kidney, right kidney and spleen being 4099.07, 2144.44, 1383.33, 326.85, 325.93 and 964.82g, respectively. The length, width and thickness of the spleen were 43.3, 12.37 and 2.80cm, respectively. 3. The average live weight of 4 years old cows examined was 314.67kg, while these weight of visceral organs such as liver, lung, heart, left kidney, right kidney and spleen being 4186.67, 2292.50, 1392.50, 346.67, 343.33 and 932.50g, respectively. The length, width and thickness of the spleen were 47.01, 12.55 and 3.08cm, respectively. 4. The average live weight of 5 years old cows examined was 328.90kg, while these weight of visceral organs such as liver, lung, hearts left kidney, right kidney and spleen being 4465.32, 2394.35, 1493.55, 370.16, 335.97 and 997.58g, respectively, The length, width and thickness of the spleen were 49.17, 12.76 and 3.16cm, respectively. 5. The average live weight of 6 years old cows examined was 334.97kg, while these weight of visceral organs such as liver, lung, heart, left kidney, right kidney and spleen being 4585.29, 2552.79, 1555.89, 364.70, 373.24 and 985.29g, respectively. The length, width and thickness of the spleen were 48.27, 12.66 and 2.78cm, respectively. 6. The average live weight of 156 cows (over 7 years of age) examined was 344.91kg, while these weight of visceral organs such as liver, lung, heart, left kidney, right kidney and spleen being 4730.77, 2651.44, 1554.39, 407.37, 409.42 and 1101.06g, respectively. The length, width and thickness of the spleen were 51.04, 13.21 and 3.08cm, respectively. 7. Total average live weight of 341 cows (from 2 to 6 and over 7 years of age) examined was 332.44kg, while these weight of visceral organs being 4550.95, 2497.13, 1500.76, 380.18, 382.27 and 1047.98g, respectively. The length, width and thickness of the spleen were 52.01, 12.96 and 3.02cm, respectively. 8. The correlation coefficients between the live weight of 341 cows and their visceral organs were found to be highly significant (P<0.01), except fort for the length of spleen

• Journal of Periodontal and Implant Science
• /
• v.35 no.1
• /
• pp.251-261
• /
• 2005

Alveolar ridge defects may limit or restrict placement of implants. The purpose of this study was to evaluate clinical and histopathologic results which occur following guided bone regeneration using platelet-rich plasma, bovine bone powder and e-PTFE membrane in the localized alveolar bone defects. Ten patients who required guided bone regeneration in implant placemnet, were slelected. Alveolar crest height and width were measured at baseline and, afer 2nd surgery 5 months later At 5 months , we obtained histopathological results as follows: 1. Alveolar crest height was an average of $8.20{\pm}3.74$ mm preoperatively and decreased to an average of $7.40{\pm}1.84$ mm postoperatively. There was no significant difference. 2. Alveolar crest width was an average of $4.25{\pm}2.03$ mm preoperatively and significantly increased to an average of $7.20{\pm}2.44$ mm postoperatively (P<0.01) 3. The change of Alveolar crest height and width were $0.80{\pm}1.40$ mm, $2.95{\pm}1.09$ mm 4. Histopathological evaluations revealed new bone formation with graft material and laminated bone containing the presence of osteocyte-like cell In conclusion, guided bone regeneration using platelet-rich plasma, bovine bone powder and e-PTFE membrane would provide a viable therapeutic alternative for implant placement in the localized alveolar defect or implant failure

• Journal of radiological science and technology
• /
• v.42 no.1
• /
• pp.1-7
• /
• 2019

In order to analyze the factors affecting incidence angle and incident point when conducting a general radiography using Sella Turcica, the length and width of the head bone according to age and gender, length and width of Sella Turcica, and the distance between the front and the top of EAM to Sella Turcica were measured. The subjects were 400 patients who underwent a Skull series. For statistical analysis, t-test and ANOVA analysis were conducted using SPSS Ver.22.0. For post-test, Duncan was conducted and if the results were 95% or more (p<.05), it was determined to be significant. As a result of this study, the average length of the head bone was 177.45 mm, where the males were 182.84 mm and the females were 172.05mm showing that males were measured longer (p<.001). The width of the head bone was 116.98mm on average, where the males were 119.18mm and the females were 114.77mm(p<.001) showing that males were measured longer. The average length of Sella Turcica was 4.59mm, where the males were 4.54mm(p<.001) and the females were 4.63mm(p<.001) showing that females were measured longer. The average length of Sella Turcica was 7.08mm, where the males were 7.01mm(p<.001) and the females were 7.16mm(p<.001) showing that females were measured longer. The general radiology examination of Sella Turcica at a medical facility should be conducted in consideration of age and gender in accordance with the characteristics of Koreans.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.15 no.1
• /
• pp.21-30
• /
• 2013

The purpose of this study is to recognize the differences of visual evaluation by variations in silhouette of the wide pants. The stimuli are 9 samples: One control group, 3 variations of the width of hem line and 3 variations of the silhouette. The data has been obtained from 57 fashion college students. The data has been analyzed by Factor Analysis, Anova, Scheffe's Test. The results of the study are as follows: The visual evaluation by silhouette of wide pants are composed of 5 factors(i.e., physical characteristics, complexity, attractiveness, originality, and stiffness and softness). Among these factors, the physical characteristic is evaluated to be the most important factor. The straight pants were the most attractive and modern when the width of the hem line was 66cm (1st stage), while the pants were uncomfortable and unwearable when the width of the hem line was 98cm (3rd stage). The bell-bottom pants were evaluated to be the most attractive with the average width of the hem line. When the width of the hem line of the flare pants were too wide, it was uncomfortable and unwearable but had its unique originality. When the width of the hem line was narrow, the visual image changed as the pants' silhouette varied. However, when the width of the hem line was wide, the visual image did not change by silhouette.

• Journal of Korean Foot and Ankle Society
• /
• v.11 no.1
• /
• pp.18-22
• /
• 2007

Purpose: To provide basic data on anatomy of the ankle joint in adults using magnetic resonance imaging as well as to compare measurements with available data of corresponding dimension in the different sizes of the total ankle replacements design ($HINTEGRA^{(R)}$). Materials and Methods: Magnetic resonance (MR) sagittal and coronal images from one hundred-forty nine were studied. Post traumatic, arthritic, or grossly deformed ankles at any reason were excluded. Lengths, widths of the main parts of this articulation and also the radius of curvature of talar dome were measured in the MR images. Statistical analysis was performed on these measurements. Results: On MR coronal image data, average tibial width was $30.0{\pm}4.1\;mm$ and talar width was $27.0{\pm}3.4\;mm$. On sagittal image date, average anteroposterior length of the distal tibia was $39.0{\pm}4.2\;mm$, average anteroposterior length of the talus was $31.3{\pm}2.8\;mm$, and average sagittal radius of curvature of talar dome was $20.1{\pm}2.9\;mm$. All measurements in male were significantly larger than in female (p<0.01), but a significant difference according to age was not found. Conclusion: Ankle morphometric data define a basis of size, particularly useful in the design of ankle prostheses.

• Journal of Practical Agriculture & Fisheries Research
• /
• v.24 no.4
• /
• pp.11-17
• /
• 2022

Ginseng hydroponic cultivation was cultivated as a nutrient solution and the growth was investigated 60 days later. The length(cm) increased from EC1.0 and EC2.0 concentrations to 5.47cm before, followed by EC0.5, 2.5, 1.5, and 0.0. The weight(g) increased from EC1.0 concentration to 2.39g before, followed by EC1.5, 2.5, 0.5, 0.0 and 2.0. The width(mm) increased from EC1.0 concentration to 1.9mm than before, followed by EC2.5, 0.5, 1.5, 2.0, and 0.0. In the ginseng growth experiment according to nutritional components, the average length of NO₃-N mixed experiment increased to 0.33cm, the average weight of 0.04g, and the average width of 0.35mm. In the experiment in which NH₄-N was mixed without NO₃-N, the growth was reduced to 0.37cm in average length, 0.03g in average weight, and 0.22mm in average width. In an experiment in which germanium(Ge) is mixed with a nutrient component, the average length is increased to 0.33cm, the average weight is increased to 0.04g, and the average width is increased to 0.35mm, but in an experiment excluding germanium(Ge), the growth is reduced to 0.11cm, the average weight is 0.04g, and the average width is 0.03mm.