• 제목/요약/키워드: Average mode

검색결과 1,005건 처리시간 0.025초

저전송률 비디오 압축에서 적응적 초기 QP 결정 알고리즘 (Adaptive Initial QP Determination Algorithm for Low Bit Rate Video Coding)

  • 박상현
    • 한국정보통신학회논문지
    • /
    • 제14권9호
    • /
    • pp.1957-1964
    • /
    • 2010
  • 비디오 코딩에서 GOP의 첫 번째 프레임은 많은 비트를 발생시키는 인트라 모드로 압축되고 다음 프레임의 인터모드 압축에 사용되기 때문에 첫 프레임을 위한 초기 QP 값은 첫 프레임뿐만 아니라 이후 프레임에도 영향을 주게 된다. 일반적으로 GOP의 초기 QP 값은 이전 GOP의 인터 모드로 압축된 프레임의 평균 QP 값과 이전 GOP의 초기 QP 값에 의해 결정된다. 기존 방식인 JM의 경우 초기 QP 값이 인터 모드 평균 QP 값보다 2 정도 작게 설정 되도록 하고 있는데, 이것은 저전송률 비디오 코딩에 맞지 않다. 본 논문에서는 GOP의 초기 QP 값과 인터 모드로 압축된 프레임의 평균 QP 값의 비와 최적 초기 QP 값 사이에 존재하는 선형 관계를 분석하고 이를 바탕으로 선형 모델을 제안한다. 제안된 선형 모델은 이전 GOP의 인코딩 결과를 이용하여 현재 GOP의 초기 QP 값을 계산한다. 실험 결과는 제안하는 방법이 기존의 JM 알고리즘에 비해 정확하게 최적의 초기 QP 값을 예측하고 PSNR 성능도 더 우수함을 보여준다.

통신위성 배터리 충,방전기 설계 및 해석 (Design and Analysis of a Battery Charge and Discharge Regulator of Communication Satellite)

  • 최재동
    • 한국항공우주학회지
    • /
    • 제31권7호
    • /
    • pp.118-126
    • /
    • 2003
  • 본 연구에서는 모듈형태의 배터리 충-방전기가 정상상태뿐만 아니라 과도상태에서 예기치 못한 결함이 발생할지라도 실패 없이 전원을 공급하는 것이 가능한 병렬형 양방향 컨버터로 설계되어졌다. 컨버터 모듈은 안정성, 성능 및 고신뢰성을 얻기 위해 독립적인 제어가 가능하도록 설계되었으며, 제어기를 위해 사용된 평균전류모드방식은 노이즈 면역, 빠른 응답 및 평균전류 신호 획득과 같은 장점을 갖는다. 병렬 연결된 배터리 충-방전기에 대한 등가모델이 제시되었으며, 충전연속모드, 방전연속/불연속 모드에 대한 전달함수가 분석되었다. 병렬 양방향 컨버터는 스텝 부하변화와 하나의 컨버터 모듈 실패에 대해 각각 수행되었다. 그리고 병렬 양방향 컨버터의 성능이 실험결과들을 통해 검증되었다.

동해 남한국대지 퇴적물의 생물기원 성분 입도 분포의 특성과 고해양학적 의미 (Characteristics and Paleoceanographic Implications of Grain-size Distributions of Biogenic Components in Sediments from the South Korea Plateau (East Sea))

  • 장준호;박장준;김은정;엄인권
    • Ocean and Polar Research
    • /
    • 제42권3호
    • /
    • pp.249-261
    • /
    • 2020
  • This study details grain-size distributions (GSDs) of carbonate and biogenic opal fractions of the sediments retrieved from the South Korea Plateau in the East Sea and draws paleocanographic implications from them. The opal-fraction GSDs show fine modes of 10.3 ㎛ and coarse modes of 102.5 ㎛ on average. The fine-mode grains of opal fractions mainly consist of small diatoms and radiolarians including their broken frustules, while the coarse-mode grains are mostly comprised of large warm-water diatoms and radiolarians. Significant positive correlation between opal contents and abundances of the coarse-mode GSDs in the total GSDs suggests that the abundances of the coarse-mode GSDs were controlled by the increased surface productivity of warm-water diatoms during interglacial stages. The carbonate-fraction GSDs show fine modes of 2.4 ㎛ and coarse modes of 99.1 ㎛ on average. The fine-mode grains mainly consist of coccolithophores, while the coarse-mode grains are mostly comprised of intact or broken planktonic foraminifera. The abundances of coarse-mode and fine-mode GSDs were not correlated with carbonate contents, suggesting a complex control exerted by both the degree of carbonate dissolution and the productivity of coccolithophores on the carbonate-fraction GSDs.

PC & TV 겸용 모니터에서 사용자의 색채 및 밝기 인식 특성 (Perception of Color and brightness in a combined PC and TV monitor)

  • 박재희;정광태;정병국;김상두
    • 한국감성과학회:학술대회논문집
    • /
    • 한국감성과학회 1997년도 한국감성과학회 연차학술대회논문집
    • /
    • pp.140-145
    • /
    • 1997
  • A stuey to investigate the perception characteristics of color and brightness was conducted in a combined PC and TV monitor, The objective of this study is to suggest user's favorite color temperature in PC mode and user's favorite contrast in TV mode. Investigated factors were monitor coating(coatiog vs. non-coation)and screen brightness (30fL vs. 35fL)in first experiment and monitor coating and pucture movement(static vs. dynamic) in second experiment. The first experiment was conducted in TV mode. Twenty-three subjects (male 12, female 11) perticipated in this experiment. In first experiment, average color temperatures were about 8000K in all experimental conditions. In addition, there was significant difference between coating and non-coating screen at 0.1 level. In second experiment, average contrasts were obtained in all esperimental conditions. There was significant difference between coating and ndn-coating screen at 0.05 level, In addition, there was significant difference between static picture and dynamic picture at 0.1 level

  • PDF

이중 모드 스윗칭 억세스 프로토콜을 이용한 고속 근거리 통신망의 성능평가 (Performance Evaluation of a High-Speed LAN using a Dual Mode Switching Access Protocol)

  • 주기호
    • 한국통신학회논문지
    • /
    • 제21권10호
    • /
    • pp.2620-2633
    • /
    • 1996
  • In this paper, a new high-speed local area network using a dual mode switching access (DMSA) protocol implemented on a dual unidirectional bus is described. By utilizing the implicit positionalordering of stations on a unidirectional bus, the proposed system switches between random access mode and the token access model withoug unnecessary delay. Therefore, unlike other hybrid systems such as Buzz-net and Z-net, DMSA does not show a rapid degradation in performance as the load increases. We obtain the average channel utilization and the average access delay by using a simplified analytic model. The numerical results obtained via analysis are compared to the simulation resuls for a partial validation of the approximate model. The performance characteristics of DMSA are superior delay-throughput characteristics at light and medium loads, compared to compared to other LAN systems, and the capability of providing a single active station with full capabity of the channel.

  • PDF

Interleaved 승압형 역률보상 컨버터의 해석 (Analysis of Interleaved Boost Power Factor Corrector)

  • 허태원;박지호;노태균;정재륜;김동완;우정인
    • 전기학회논문지P
    • /
    • 제51권4호
    • /
    • pp.186-192
    • /
    • 2002
  • In this paper, interleaved boost power factor corrector(IBPFC) is applied as a pre-regulator in switch mode power supply. IBPFC can reduce input current ripple and effectively increase the switching frequency without increasing the switching losses, because input current is divided each 50% by two switching devices. IBPFC can be classified as three cases by duty ratio condition in continuous current mode and be carried out state space average modeling. According to the modeling, steady and transient state analysis is performed by steady elements and perturbation element. Control transfer function is derived for design of control system.

승용차의 도심 주행패턴에 관한 연구 (A Study on the Driving Patterns for Passenger Car in the Metropolitan Area)

  • 정남훈;이우택;선우명호
    • 한국자동차공학회논문집
    • /
    • 제11권1호
    • /
    • pp.18-24
    • /
    • 2003
  • Vehicle emission is one of the major sources of air pollution, and provides some undesirable effects on the atmospheric environment and human health. In this study, the driving data were recorded during road tests in Seoul metropolitan wet and analyzed by statistical techniques. The objective of the study is to analyze the driving Patterns of passenger car that influence on emissions in urban driving. The results show that the average speed is around 29.2 km/h, and the average fuel economy is 10.23 km/$\ell$. The vehicle speed of Seoul metropolitan area is slower, and the stop-and-go operation is more frequent than CVS-75 test mode which is used far emission and fuel economy test.

통계 영역에서 대표값의 의미와 지도에 관한 고찰 (A Study on the Meaning of Average Values and Its Teaching Statistics Area)

  • 박영희
    • 대한수학교육학회지:학교수학
    • /
    • 제3권2호
    • /
    • pp.281-294
    • /
    • 2001
  • As a measure of the center of data, arithmetical mean, median, mode, harmonic mean and geometric mean are generally used. Students must learn qualitative aspect of average values as well as its calculation for its adequate use. As the result of the learning, they should be able to select the appropriate average value according to the characteristic of data and problem context. For this object, the historical origin and visual interpretation of average values were introduced in this paper. And to help teaching several meanings of average values, several examples including context were suggested.

  • PDF

시간 평균 ESPI를 이용한 진동 물체의 모우드 형태의 계측 (Measurement of Vibration Mode Shapes Using Time Average ESPI)

  • 강영준;최장섭
    • 한국정밀공학회지
    • /
    • 제13권2호
    • /
    • pp.84-93
    • /
    • 1996
  • Non-destructive inspection techniques using laser have been broading their application areas as well as growing their measurement skills together with the rapid development of circumferential technology like fiber optics, computer and image processing. The ESPI technique is already on the stage of on-line testing with commercial products in developed country nations. Especially, this technique is expected to be applied to the nuclear industry, automobile and aerospace because it is proper for the vibration measurement and it can be applied to objects of a high temperature. This paper describes the use of the ESPI system for measuring vibration patterns on the reflecting objects. Using this system, high-quality Jo fringes for identifying mode shapes are displayed. A bias vibration is introduced into the reference beam to shift the Jo fringes so that fringe shift algorithms can be used to determine vibration amplitude. Using this method, amplitude fields for vibrating objects were obtained directly from the time-average interferograms recorded by the ESPI system.

  • PDF

평균전류모드제어를 이용하는 컨버터의 모델링 및 설계 (Modeling and Design of Average Current Mode Control)

  • 정영석
    • 전력전자학회논문지
    • /
    • 제10권4호
    • /
    • pp.347-355
    • /
    • 2005
  • 본 논문에서는 평균전류모드제어를 이용하는 컨버터의 연속시간 소신호 모델을 구한다. 평균전류모드제어에 일반적으로 사용되는 보상기를 적용한 컨버터의 해석을 위해 샘플러를 전류루프에 포함시켜 해석한다. 기존 모델에서는 정확히 해석하기 어려웠던 전류루프 이득의 고주파 영역 해석이 제안한 모델을 이용함으로 쉽게 해결할 수 있으며, 시스템의 안정성을 결정하는 고주파 영역에서의 주파수 응답 특성을 제안한 모델이 우수한 성능으로 예측 가능함을 보인다. 이를 위해 평균전류모드제어에서 전류루프에 샘플러가 포함된 모델을 제시하고 이 샘플러에 대한 연속시간 모델을 구하여 평균전류모드제어의 연속시간 모델을 구한다. 제안한 새로운 연속시간 소신호 모델을 이용한 예측 결과를 스위칭 모델 시뮬레이션 프로그램인 PSIM을 이용한 시뮬레이션 결과 및 실험결과와 비교하여 제안한 새로운 연속시간 소신호 모델의 우수성을 확인한다