• Proceedings of the KOSOMBE Conference
• /
• v.1994 no.12
• /
• pp.113-116
• /
• 1994

Estimation of the evoked potential using the iterated bispectrum and cross-correlation (IBC) has been tried for both simulation and real clinical data. Conventional time average (TA) method suffers from synchronization error when the latency time of the evoked potential is random, which results in poor SNR distortion in the estimation of EP waveform. Instead of EP signal average in time domain, bispectrum is used which is insensitive to time delay. The EP signal is recovered by the inverse transform of the Fourier amplitude and phase obtained from the bispectrum. The distribution of the latency time is calculated using cross-correlation between EP signal estimated by the bispectrum and the acquired signal. For the simulation. EEG noise was added to the known EP signal and the EP signal was estimated by both the conventional technique and bispectrum technique. The proposed bispectrum technique estimates EP signal more accurately than the conventional technique with respect to the maximum amplitude of a signal, full width at half maximum(FWHM). signal-to-noise-ratio, and the position of maximum peak. When applied to the real visual evoked potential(VEP) signal. bispectrum technique was able to estimate EP signal more distinctively. The distribution of the latency time may play an important role in medical diagonosis.

• Journal of the Korea Society of Computer and Information
• /
• v.14 no.10
• /
• pp.1-10
• /
• 2009

Precise branch predictor has a profound impact on system performance in modern processor architectures. Recent works show that prediction latency as well as prediction accuracy has a critical impact on overall system performance as well. However, prediction latency tends to be overlooked. In this paper, we propose Branch Pre-Prediction policy to tolerate branch prediction latency. The proposed solution allows that branch predictor can proceed its prediction without any information from the fetch engine, separating the prediction engine from fetch stage. In addition, we propose newly modified BTE structure to support our solution. The simulation result shows that proposed solution can hide most prediction latency with still providing the same level of prediction accuracy. Furthermore, the proposed solution shows even better performance than the ideal case, that is the predictor which always takes a single cycle prediction latency. In our experiments, IPC improvement is up to 11.92% and 5.15% in average, compared to conventional predictor system.

• The Journal of the Korea Contents Association
• /
• v.8 no.7
• /
• pp.58-65
• /
• 2008

The overlay multicast that has been recently presented as an alternative for the IP multicast has been getting much attention by the advancement of network techniques to enforce routing in application-levels. In this paper, we verified the efficiency of Internet broadcasting through comparing latency time of TBCP with mOBCP that have distributed Tree-first based spanning-tree structures in overlay multicast techniques. We also propose effective tree structures that minimize latency time and provide competent service by choosing optimum parent nodes early in the base of these two methods over the same time slot in multi-user connection. The results of our comparison showed that average latency time in mOBCP techniques declined by 36% from those of TBCP technique.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.3
• /
• pp.48-55
• /
• 2015

This paper studies how to solve a problem caused by M2M terminals sending a few data based on $3^{rd}$ Generation Partnership Project(3GPP) Long Term Evolution-Advanced(LTE-A) system and then it is analyzed, proposed, and introduced into the techniques. Especially, it is introduced solution for the lack of Random Access Channel and an increasing number of latency caused by countless M2M devices. It is proposed the technology for M2M grouping as well as allowable access probability according to user type. As it decreases the number of terminal by grouping M2M devices to try random access at PRACH, it can be reduced collision between Cellular users and M2M devices. So, it is proved that the proposed mechanism can solve the increasing average latency of random access on system coexisting Cellular users and M2M devices through simulations.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.15 no.5
• /
• pp.570-576
• /
• 2015

Existing flash storage devices such as universal flash storage and solid state disk support command queuing to improve storage I/O bandwidth. Command queuing allows multiple read/write requests to be pending in a device queue. Because multi-channel and multi-way architecture of flash storage devices can handle multiple requests simultaneously, command queuing is an indispensable technique for utilizing parallel architecture. However, command queuing can be harmful to the latency of fsync system call, which is critical to application responsiveness. We propose a dynamic queue depth adaptation technique, which reduces the queue depth if user application is expected to send fsync calls. Experiments show that the proposed technique reduces the fsync latency by 79% on average compared to the original scheme.

• Journal of the Semiconductor & Display Technology
• /
• v.18 no.3
• /
• pp.127-132
• /
• 2019

This paper presents an overview of automotive communication technologies, including related technology developments. We describe the latency of Audio Video Bridge (AVB) network as well as purpose the optimized design of the Ethernet network system for automotive. Our design plays a significant role in reducing the delay between components. The proposed approach on realistic test cases showed that there was a delay reduction, approximately 49.4%. It is expected that the optimization method for the actual automotive environment can greatly shorten the time period in the design and development process. The results obtained from the experiments on the delay time present in each function are reliable because average values are obtained through repeated actual tests for several months. It will greatly benefit the industry since analyzing the latency between each function in a short period of time is very important.

• Journal of the Korea Society of Computer and Information
• /
• v.24 no.7
• /
• pp.1-8
• /
• 2019

Recently, an SSD with hybrid buffer memories is actively researching to reduce the overall latency in server computing systems. However, existing hybrid buffer policies caused many swapping operations in pages because it did not consider the overall latency such as read/write operations of flash chips in the SSD. This paper proposes the clock with hybrid buffer memories (CLOCK-HBM) for a new hybrid buffer policy in the SSD with server computing systems. The CLOCK-HBM constructs new policies based on unique characteristics in both DRAM buffer and NVMs buffer for reducing the number of swapping operations in the SSD. In experimental results, the CLOCK-HBM reduced the number of swapping operations in the SSD by 43.5% on average, compared with LRU, CLOCK, and CLOCK-DNV.

• ETRI Journal
• /
• v.45 no.1
• /
• pp.60-74
• /
• 2023

Integration of the machine learning (ML) technique in all-optical networks can enhance the effectiveness of resource utilization, quality of service assurances, and scalability in optical networks. All-optical multistage interconnection networks (MINs) are implicitly designed to withstand the increasing highvolume traffic demands at data centers. However, the contention resolution mechanism in MINs becomes a bottleneck in handling such data traffic. In this paper, a select list of ML algorithms replaces the traditional electronic signal processing methods used to resolve contention in MIN. The suitability of these algorithms in improving the performance of the entire network is assessed in terms of injection rate, average latency, and latency distribution. Our findings showed that the ML module is recommended for improving the performance of the network. The improved performance and traffic grooming capabilities of the module are also validated by using a hardware testbed.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.23 no.4
• /
• pp.324-331
• /
• 2001

The present study was aimed to investigate the effects of latency period on alveolar ridge distraction using the intraoral distraction device. Nine adult mongrel dogs of either sex, weighing about 15kg, were used. They were divided into 3-day, 5-day, and 7-day groups according to the latency period. The left upper and lower premolars and first molars were extracted. Twelve weeks after the extraction, an osteotomy was performed and the distraction device was applied. After the latency period, the distraction was applied at a rate of 1.2mm for 8 days. The distraction device was left in place for 2 weeks to allow consolidation and was then removed. The animals were sacrified at 8 weeks after completion of distraction and were examined macroscopically, radiographically, and histologically. After completion of the distraction, the alveolar crest protruded prominently, showing the vertical augmentation of the alveolar bone. Soft tissues were broken down after the 6th day of distraction in 3-day latency group, and premature union occurred on the 7th day of distraction in the 7-day latency group. The average distance was $9.40{\pm}0.3mm$ in 3-day latency group, $9.35{\pm}0.1mm$ in 5-day latency group, and $8.85{\pm}0.1mm$ in 7-day latency group. In the radiograph taken at 8 weeks after distraction, there was slight bone resorption around the medial and distal edges of the alveolar bone segment, and a new bone deposition was observed in the neighboring alveolar crest area in all groups. Fibrous tissues were present in a part of the buccal cortical bone area of the distraction gap, and the woven and lamellar bones were observed in the distracted gap. There were bony bridges in the distraction gap in all animals examined. These results suggest that optimal time of latency period on alveolar ridge distraction using the intraoral distraction device is about 5 days in dogs, and about 7days in human beings.

• Journal of Communications and Networks
• /
• v.17 no.3
• /
• pp.306-320
• /
• 2015

Due to an explosive growth in services running in different datacenters, there is need for service selection and routing to deliver user requests to the best service instance. In current solutions, it is generally the client that must first select a datacenter to forward the request to before an internal load-balancer of the selected datacenter can select the optimal instance. An optimal selection requires knowledge of both network and server characteristics, making clients less suitable to make this decision. Information-Centric Networking (ICN) research solved a similar selection problem for static data retrieval by integrating content delivery as a native network feature. We address the selection problem for services by extending the ICN-principles for services. In this paper we present Queue and Latency, a network-driven service selection algorithm which maps user demand to service instances, taking into account both network and server metrics. To reduce the size of service router forwarding tables, we present a statistical method to approximate an optimal load distribution with minimized router state required. Simulation results show that our statistical routing approach approximates the average system response time of source-based routing with minimized state in forwarding tables.