• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 1999년도 추계학술대회 논문집 - 한국공작기계학회
• /
• pp.204-209
• /
• 1999

The dressing time monitoring in cylindrical grinding is very important with respect to machining efficiency. Therefore, the purpose of this paper is to determine the wheel life by monitoring behavior of grinding power for Wa, 19A and GC. For this purpose, we investigated indirectly the attritious wear of grain edge, the loading of grinding wheel and the breakage of grain through the grinding power and the surface roughness under various grinding conditions. From obtained the results, the relationship between the wheel life and the average sectional chip area is examined to guide for the determination of dressing time.

• Applied Microscopy
• /
• 제1권1호
• /
• pp.3-10
• /
• 1969

By the use of electron microscope, the study has beek made on the grain size in photo graphic emulsions, which are made at different temperature. It is found that ,the optimum temperature is $60^{\circ}C$, at which the average grain size obtained is the biggest. Also electron micrographs show NaCl-type crystal structure of AgBr and AgCl, as we expected.

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2004년도 총회 및 춘계학술발표회
• /
• pp.213-217
• /
• 2004

Laboratory scale study for an area of influence and flowing aspect of groundwater saturated zone was conducted for three sediment grains. On the AMG(Average Modal diameter Grains) 0.34, 1.38, 3.89mm diameter samples, the affected area of the aquifer were 15.2, 37.0, 30.0%/m2 each. Air flow for AMG 0.34mm diameter grain size provides indication of pattern of channelized air flow in saturated zone and expansion state in above saturated zone. For AMG of 1.38, 3.89mm diameter grains, air flow are pervasive air flow, forming a symmetrical cone of influence around the injection point. And also AMG 1.38, 3.89mm diameter samples show onset of collapse and approach to steady state in above saturated zone, respectively. In this study, optimal sites for in situ air sparging, may be grain diameters between about AMC 1.5～2.5mm diameter.

• 한국세라믹학회지
• /
• 제56권1호
• /
• pp.84-90
• /
• 2019

The varistor properties and stability against dc-accelerated stress of $V_2O_5-Mn_3O_4-Co_3O_4-Dy_2O_3-Nb_2O_5-Bi_2O_3$ (VMCDNB)-doped zinc oxide ceramics sintered at $850-925^{\circ}C$ were investigated. Increasing the sintering temperature increased the average grain size from 4.6 to 8.7 mm and decreased the density of the sintered pellet density from 5.54 to $5.42g/cm^3$. The breakdown field decreased from 5919 to 1465 V/cm because of the increase in the average grain size. Zinc oxide ceramics sintered at $875^{\circ}C$ showed the highest nonlinear coefficient (43.6) and the highest potential barrier height (0.96 eV). Zinc oxide ceramics sintered at $850^{\circ}C$ showed the highest stability: the variation rate of the breakdown field was -2.0% and the variation rate of the nonlinear coefficient was -23.3%, after application of the specified stress (applied voltage/temperature/time).

• Journal of the Korean Wood Science and Technology
• /
• 제30권3호
• /
• pp.104-108
• /
• 2002

Nail withdrawal tests were conducted on clear wood of domestic small diameter logs. Nails were driven into the cross and longitudinal sections of each specimen, then nail withdrawal tests were performed. Nail withdrawal loads are strongly dependent on the direction of nail positions. The average load values for the nail withdrawal both in cross section and longitudinal section are higher in high specific gravity (SG) wood of sawtooth oak (Quercus acutissima Carr.) than those in low SG wood of Korean red pine (Pinus densiflora Sieb. et Zucc.) and pitch pine (Pinus rigida Mill.). The average ratio of the nail withdrawal loads for side-grain and end-grain are higher in the low SG wood than that in the high SG of wood. Both linear and non-linear regression analyses were conducted on nail withdrawal load with SG, good correlations were obtained between nail withdrawal load and SG.

• Asian-Australasian Journal of Animal Sciences
• /
• 제14권5호
• /
• pp.646-650
• /
• 2001

The effect of feeding concentrate mixture devoid of grain on the performance of crossbred dairy cows was studied. Twelve crossbred cows of first/second lactation were randomly distributed into two equal groups. The animals of group 1 were fed on a concentrate mixture containing 30% maize grain whereas, the cows of group 2 were offered a concentrate mixture where grain was completely replaced with deoiled rice bran (DORB) and molasses. Wheat straw was given ad libitum to the cows of both the groups. The feeding was continued for 112 days. The intake of dry matter, CP and TDN were similar in both the groups. Digestibility of DM, OM, EE, NDF and ADF were also comparable between the groups. The average daily fat corrected milk (FCM) yield was 7.70 kg and 7.43 kg in group 1 and 2, respectively. The chemical composition of milk (protein, fat and total solids) also remained unaffected. The animals of both the groups gained 9-10 kg body weight which indicates that both the diets were nutritionally adequate and grain can be successfully replaced with DORB and molasses from the diet to sustain about 6-7 kg FCM production.

• 한국작물학회지
• /
• 제35권3호
• /
• pp.211-217
• /
• 1990

팔당호밀과 신기호밀에 대한 전엽시기와 전엽정도가 종실의 발육에 미치는 영향을 구명코자 시험을 실시한 결과를 요약하면 다음과 같다. 1. 엽신중은 2엽, 3엽, 지엽 경으로 무거웠다. 2. 엽록소함량은 지엽, 2엽, 3엽 순으로 높았으며, 엽소도 같은 경향이었고 신기호밀보다 팔당호밀에서 높았다. 3. 립중은 전엽시기가 늦고 전엽정도가 적을수록 무거웠다. 4. 엽신들의 생산효과는 지엽, 2엽, 3엽 순으로 높았다. 5. 이삭부위별 립중은 중부, 하부, 상부 순으로 무거웠다.

• E2M - 전기 전자와 첨단 소재
• /
• 제9권6호
• /
• pp.542-550
• /
• 1996

ZnO-based ceramic varistors containing NiO range 0.5 mol% to 4.0 mol% were fabricated by standard ceramic techniques. The influence of NiO on the microstructure and electrical behavior of ZnO varistor was investigated. As the content of NiO additive increases, average grain size decreased from 16.5.mu.m to 13.2.mu.m, and the amount of NiO existing in the grain interior and grain boundary region was approximately equal. NiO acted as an acceptor which decreases donor concentration due to the increase of Zn vacancy in the grain, and as a driver which migrates Zn interstitial in the depletion region toward the interface of grain boundary, which resulted in the decrease of interface state density. As a result, increasing the content of NiO additive, barrier height, nonlinear exponent, and varistor voltage decreased, and leakage current increased. Wholly, the physical and electrical properties of the ZnO varistor can be said to be affected by the NiO additive.

• 산업기술연구
• /
• 제7권
• /
• pp.49-58
• /
• 1987

To investigate the effect of the Retrogression and Reaging (RRA) treatment on the strength and the stress corrosion cracking in AA 7039 the measurement of hardness, tensile properties and the time to failure in a constant rate method were measured. Transmission electron microscope was used to examine the microstructural changes within graln and grain boundary. The results show that the RRA treatment of the T6 condition results in a significant increase in the time to failure without sacrifying the original T6 strength. It is believed that high density and even distribution of precipitates in RRA condition were observed within grain so that the RRA condition could have similar strength to the T6 condition. The presence of fine dispersion of semicohernt ${\eta}^{\prime}$ transition phase is also believed to contribute to that effect. Examination of the grain boundary microstructure shows that the RRA treatments increases significantly the average size of the grain boundary preciptates. It is suggested that the benificial effect of the RRA treatment on the susceptibility to SCC be due to the increase in the size of grain boundary precipitates obtained during the retrogression treatment.

• 열처리공학회지
• /
• 제29권6호
• /
• pp.259-263
• /
• 2016

This study was carried out to investigate the effect of hot forging ratio on the microstructure and mechanical properties of incoloy 825 alloy. Hot forging was carried out at the forging ratio of 0%, 60% and 90% respectively in a range of $900^{\circ}C{\sim}1,140^{\circ}C$ and followed solution treatment was conducted at $1,000^{\circ}C$ for 1 hr. In all the specimens of hot forged of 0%, 60% and 90%, precipitates were not observed. The average grain size of 0% specimen is $82{\mu}m$ and that of 60% and 90% is $56{\mu}m$ and $31{\mu}m$, respectively. The range of grain size in the 0% specimen is uneven in $182{\mu}m$ to $31{\mu}m$, but the grain size of 90% specimen is uniform. With increasing hot forging ratio, the mechanical properties such as tensile strength, elongation, hardness increased and impact toughness increased by grain refinement.