• Journal of Animal Science and Technology
• /
• v.48 no.3
• /
• pp.479-486
• /
• 2006

The current study was conducted to examine the effect of feeding and management practices on milk quality and dairy farm productivity in Korea. Fifty dairy farms in Gyunggi (11), Gangwon (22), Chungnam (17) provinces were surveyed to collect data on the herd size, housing style, feeding management, waste disposal, milking practices and milk yield. Milk tank samples from all farms under study were also collected to enumerate its composition and quality parameters. Large dairy herds are equiped with better housing, milking and waste control facilities than medium and small dairy herds. Higher concentrate feeding to lactating cows was noticed in small dairy herds (47.51 %) than in medium (32.59 %) and large dairy herds (31.82 %). The decrease in concentrate feeding to lactating cows with increase in number of cows per farm resulted in a simultaneous increase in the use of imported forages. Bacterial count in milk was affected by housing and milking facilities at dairy farms. Higher bacterial counts (Coliform and E. coli) in milk were observed in cows housed in stanchion than those under free stall with saw dust bedding. The bacterial counts were higher with bucket milking system than with pipe-line and parlour systems. The increase in the number of dairy cows per farm and thus better management and milking facilities resulted in a reduction in somatic cell score. Milk yield (per cow) was higher in herds with less somatic cell score. Average milk protein concentration was between 2.89 to 2.98 % and milk urea nitrogen was between 21.81 to 23.31mg/ml on surveyed dairy farms. This study concluded that large herd size with better dairy cow management facilities is crucial to produce quality milk with better dairy farm income.

• Journal of Animal Science and Technology
• /
• v.53 no.1
• /
• pp.59-66
• /
• 2011

For the improvement of productivity of beekeepers and to develop new management strategy through the analysis of current honeybee-keeping management types and evaluation of related skills and basis in Korea were surveyed. The serial surveys were carried out in 2008 for a total of 253 beekeepers from different localities in Korea. The results revealed that 145.9 colonies of honeybee were managed by each beekeeper in Korea. The beekeepers group who were younger than 55 years possessed 191.7 colonies. The older age group of beekeepers kept rather smaller number of colonies. The career groups over 15 years in apiculture were keeping 176.0 colonies in average. The numbers of bee colonies were not significantly different among localities and educational backgrounds. The migratory apiaries with 145.9 hives were dominant than those fixed ones with 83.0 (p<0.01). It was observed that 57.8% of apiaries were located in the vicinity of farmer's house, whereas 30.3% were managed in mountain area; however older group (65.4%) preferred to keep it near their houses (p<0.05). The proportion (35.7%) of part-time fixed apiary was the highest among four apiary management types. The younger group and high career group operated full-time migratory apiary (38.8% and 40.3%) (p<0.05), respectively. However, the older group and low career group preferred as part-time fixed one (43.2% and 46.6%), respectively (p<0.001). There was no significant difference among localities. The surveyed beekeepers produced propolis, commercial colonies, pollen, royal jelly, and pollination hives in addition to honey. The group of less than 15 years career and mountain apiary mainly produced propolis and pollen. However, those who dwell in small and middle areas mainly produced propolis and commercial colonies. The levels related to beekeeping skills and basis were evaluated as intermediate from 3.11 and 2.86 points on 5 points scale, respectively. More careered group having skill level of 3.33 point and basis level of 3.02 showed higher levels than less careered one. The levels of skill and basis evaluated from age groups and localities were similar with each other with no significance.

• Current Research on Agriculture and Life Sciences
• /
• v.31 no.1
• /
• pp.45-50
• /
• 2013

Mutagenesis is used to study gene function and obtain new genetic resources for plant breeding. Soybean is an important oil crop in the world. Thus, to find new genetic resources, a mutation population was developed from the soybean cultivar Pungsannamul using 0.3% ethyl methane sulfonate. The variation of fatty acids was then evaluated among 892 M4 generation mutant lines selected from 3,774 mutant lines. While the wild type Pungsannamul showed 11.6, 3.4, 23.8, 53.3, and 7.8% for palmitic, stearic, oleic, linoleic and linolenic acid, respectively. the fatty acid variations in the mutant lines ranged from 7.4 to 19.7%, 2.2 to 13.0%, 14.7 to 49.0%, 31.8 to 63.9%, and 3.9 to 15.9% with an average of 10.8, 3.8, 25.3, 52.0, and 8.1% for palmitic, stearic, oleic, linoleic and linolenic acid, respectively. Thus, two mutation lines with higher plamitic acid, PE1542 (17.1%) and PE3058 (17.0%), one line with lower stearic acid, PE2166 (1.9%), one line with higher stearic acid, PE977 (12.7%), two lines with higher oleic acid, PE450 (44.4%) and PE2742 (47.7%), and two lines with lower linolenic acid, PE594 (4.6%) and PE1690 (3.7%), were selected from this study. The newly selected fatty acid variants will be good genetic sources for gene function analyses and breeding soybean varieties with altered fatty acids for various industrial and human food applications.

• Journal of Korean Orthopaedic Sports Medicine
• /
• v.12 no.1
• /
• pp.29-36
• /
• 2013

Purpose: Proprioceptive function has been known to be important to shoulder stability. However, the function in rotator cuff tear patients is rarely investigated. The purpose of current study is to report the proprioceptive function in rotator cuff tear patients and to analyze the proprioceptive function regarding the tear size and the presence of subscapularis tear. Materials and Methods: Between 2011 and 2012, total 76 patients (male 28 and female 48) were recruited and average age was 61.7 years old (range, 38~76). Preoperatively, joint position senses in internal and external rotation were measured for proprioceptive function testing by method of active re-positioning technique. The absolute difference from set point was measured. Proprioceptive function was further analyzed according to tear size of rotator cuff, the presence of subscapularis tear, visual analogue scale of pain, shoulder functional score (American society of elbow and shoulder score), and ranges of motion in shoulder. Results: The absolute difference for external rotation was $4.9^{\circ}{\pm}2.9^{\circ}$, in normal joint and $4.9^{\circ}{\pm}3.0^{\circ}$for involved joint in rotator cuff tear patients. This difference was not significant statistically (p=0.87). The absolute difference for internal rotation was $4.0^{\circ}{\pm}2.7^{\circ}$in normal joint whereas $4.8^{\circ}{\pm}3.7^{\circ}$ for involved joint showing statistically significant difference (p=0.043). There was some trend that the proprioceptive function of internal rotation was more impaired in the bigger tear size group (more than medium tear) compared to the smaller tear size group (partial thickness and small tear, 5.0 vs. 4.0, p=0.061). The impairment of internal rotation proprioception was also accentuated in patients with subscapularis tear (4.8 vs. 4.0, p=0.065). The proprioceptive function of internal rotation was decreased when the pain visual analogue scale was increased (5.2 vs. 4.0 p=0.04), shoulder functional score was decreased (6.1 vs. 4.2, p=0.005), or range of motion in shoulder joint was restricted (5.3 vs. 3.7, p=0.041). Conclusion: The deficit of proprioceptive function was observed in rotator cuff tear patients. Proprioception for internal rotation was impaired in patients with the bigger tear size and subscapularis tear. Pain, shoulder function score, and range of motion were also shown to be related with the deficit in proprioceptive function.

• Journal of radiological science and technology
• /
• v.39 no.4
• /
• pp.509-516
• /
• 2016

A dental panoramic radiography which usually uses low level X-rays is subject to the Nuclear Safety Act when it is installed for the purpose of education. This paper measures radiation dose and spatial dose rate by usage and thereby aims to verify the effectiveness of radiation safety equipment and provide basic information for radiation safety of radiation workers and students. After glass dosimeter (GD-352M) is attached to direct exposure area, the teeth, and indirect exposure area, the eye lens and the thyroid, on the dental radiography head phantom, these exposure areas are measured. Then, after dividing the horizontal into a $45^{\circ}$, it is separated into seven directions which all includes 30, 60, 90, 120 cm distance. The paper shows that the spatial dose rate is the highest at 30 cm and declines as the distance increases. At 30 cm, the spatial dose rate around the starting area of rotation is $3,840{\mu}Sv/h$, which is four times higher than the lowest level $778{\mu}Sv/h$. Furthermore, the spatial dose rate was $408{\mu}Sv/h$ on average at the distance of 60 cm where radiation workers can be located. From a conservative point of view, It is possible to avoid needless exposure to radiation for the purpose of education. However, in case that an unintended exposure to radiation happens within a radiation controlled area, it is still necessary to educate radiation safety. But according to the current Medical Service Act, in medical institutions, even if they are not installed, the equipment such as interlock are obliged by the Nuclear Safety Law, considering that the spatial dose rate of the educational dental panoramic radiography room is low. It seems to be excessive regulation.

• Korean Journal of Food Science and Technology
• /
• v.40 no.6
• /
• pp.603-610
• /
• 2008

The principal objective of current study was to evaluate the potential of near infrared reflectance spectroscopy (NIRS) as a non-destructive method for the prediction of the amylose and protein contents of un-hulled and brown rice in broad-based calibration models. The average amylose and protein content of 75 rice accessions were 20.3% and 7.1%, respectively. Additionally, the range of amylose and protein content were 16.6-24.5% and 3.8-9.3%, respectively. In total, 79 rice germplasms representing a wide range of chemical characteristics, variable physical properties, and origins were scanned via NIRS for calibration and validation equations. The un-hulled and brown rice samples evidenced distinctly different patterns in a wavelength range from 1,440 nm to 2,400 nm in the original NIR spectra. The optimal performance calibration model could be obtained by MPLS (modified partial least squares) using the first derivative method (1:4:4:1) for un-hulled rice and the second derivative method (2:4:4:1) for brown rice. The correlation coefficients $(r^2)$ and standard error of calibration (SEC) of protein and amylose contents for the un-hulled rice were 0.86, 2.48, and 0.84, 1.13, respectively. The $r^2$ and SEC of protein and amylose content for brown rice were 0.95, 1.09 and 0.94, 0.42, respectively. The results of this study suggest that the NIRS technique could be utilized as a routine procedure for the quantification of protein and amylose contents in large accessions of un-hulled rice germplasms.

• Journal of Life Science
• /
• v.15 no.2 s.69
• /
• pp.225-230
• /
• 2005

The aim of this study was to examine the fluctuation in phytoplankton assemblages with regarding to environmental conditions and nutrients, which were surveyed quarterly over the fours seasons (February, May, July, and October). In turn, an understanding of biological effects should provide insights into a wide range of initiated Cochlodinium blooms in Narodo. Sampling was carried out throughout 2001 on the coasts of Busan (St. 1), Yeosu (St. 2), Narodo (St. 3), Kohung (St. 4), and Kwangdo (St. 5). The maximum surface water temperature was recorded in July, and it ranged from 20 to $22^{\circ}C$. Salinity showed no great variation, which maintained itself in the range of 29-34 psu. The maximum surface salinity was recorded in February, which was about 34 psu. The chlorophyll $\alpha$ concentration of the surface water ranged from 0.01 to $1.3\;{\mu}g\;1^{-1}$. The concentrations of $NH_{4}-N $ were persistently high from February to October; in particular, the peak was observed at St. 1 in February and May (0.15 and $0.19\;{\mu}mol\;1^{-1}$, respectively), while it was detected at St. 2 in July and October (0.22 and $2.2\;{\mu}mol\;1^{-1}$ respectively). Similar trends to those for $NH_4-N $ were observed in the concentrations of $NO_{2}-N$ and $NO_{3}-N$. In contrast to nitrogen, a distinct peak of $NO_{4}-P$ at St. 3, 4, and 5 was observed throughout year $(0.01-0.1\;{\mu}mol\;1^{-1}$ except for October. At St. 1 encounter a peak of cell number of 30,000 and $13{\times}10^3$ cells $1^{-1}$, respectively, in July and October. During the period of this study, the majority of the taxa were diatoms. The dinoflagellates were rather abundant after February, in particular at St. 3, 4, and 5 which attained an abundance of $10\~20\%$without marked fluctuation during the period of this study. At St. 3, the highest average cell width, $178.11\;{\mu}m$, was recorded: the highest cell length, $337.72\;{\mu}m$, was measured in July. Consequently, dinoflagellates bloom in July at Narodo influenced by warm water current are not only associated with a desirable development of cell morphometric characteristics, but also with the health growth of C. polykrikoides. During the period of this study, warm water currents caused an increased water temperature in Narodo, but did not change the amount of nutrients.

• Food Science of Animal Resources
• /
• v.26 no.1
• /
• pp.37-42
• /
• 2006

The current study was conducted to investigate the effect of types of crate and season on transport condition and mortality, and ultimately to identify the best practice for reducing economic lose. Total loading weight stocking density, transport and lairage times and mortality were surveyed from the management data sheet of two companies for each first week of January, April, August and October, An average loading weight, length of transport and lairage times and mortality were 3.9 ton, 96 min, 478 min and 0.6%, respectively. Mortality after lairage was not significant between two types of crate. In addition, container type crate showed higher loading weight and stocking density than box type one. Spring and winter had significantly higher mortality with 0.7 and 0.8%, respectively, then summer and fell of 0.5%. An interaction between crate type and season on mortality showed that mortality for box type on was higher in spring and winter with 0.8 and 0.7%, respectively, compared to summer and fall of 0,3 and 0.4% respectively. In the case of container type crate, spring, fall and winter had greatly different death into with 0.7, 0.5 and 0.8%, respectively, while there was no difference between spring and summer, and between summer and winter, Mortality after transportation was similar between both crate type, with higher rate for spring and winder than other seasons. The result was likely related to death of exposure due to extended waiting time without heating facility.

• Journal of the Mineralogical Society of Korea
• /
• v.25 no.3
• /
• pp.163-173
• /
• 2012

In this study, we determined the relative clay mineral composition of 51 surface sediments from SEYSM (Southeastern Yellow Sea Mud) (northern part 25, southern part 26) and 30 river sediments inflow to Yellow Sea using the semi-quantitative X-ray diffraction analyses. In addition to we analyzed illite characteristics of the same samples. The clay-mineral assemblage is composed of illite (61~75%), chlorite (14~24%), kaolinite (9~14%), and smectite (1~7%), in decreasing order. The average composition of each clay mineral is not different from northern part to southern part of SEYSM except a little higher kaolinite and lower smectite content in northern part. Smectite content generally has reverse relationship with illite content. Mineralogical characteristics of illite such as illite crystallinity index also is not different between two areas and show very narrow range (0.18~0.24 ${\Delta}^{\circ}2{\theta}$). Our results reveal that clay mineral composition and illite characteristics are nearly the same between northern and southern part of SEYSM. Characteristics of surface sediments in SEYSM is closer to Korean river sediments than Chinese Hanghe sediments, however it is necessary to investigate further study including Yangtze river sediments. This study conclude that most of surface sediments in SEYSM attribute to the supply of considerable amount of sediments from the nearby Korean rivers. The large sediment budget and high accumulation rate in the SEYSM can be explained by erosion and reworking of surface sediments in this area. Tidal and regional current system around SEYSM might contribute these erosional and depositional regimes.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.15 no.3
• /
• pp.142-154
• /
• 2011

This study predicted the probability of corrosion initiation of reinforced concrete tunnel boxes structures using the Monte Carlo Simulation. For the inner wall and outer wall in the tunnel boxes, exposed to airborne chloride ion and seawater directly respectively, statistical values of parameters like diffusion coefficient D, surface chloride content $C_s$, cover depth c, and the chloride threshold level $C_{lim}$ were examined from experiment or literature review. Their average values accounted for $3.77{\times}10^{-12}m^2/s$, 3.0% by weight of cement, 94.7mm and 45.5mm for outer wall and inner wall, respectively, and 0.69% by weight of cement for D, $C_s$, c, and $C_{lim}$, respectively. With these parametric values, the distribution of chloride contents at rebar with time and the probability of corrosion initiation of the tunnel boxes, inner wall and outer wall, was examined by considering time dependency of chloride transport. From the examination, the histogram of chloride contents at rebar is closer to a gamma distribution, and the mean value increases with time, while the coefficient of variance decreases with time. It was found that the probability of corrosion initiation and the time to corrosion were dependent on the time dependency of chloride transport. Time independent model predicted time to corrosion initiation of inner wall and outer wall as 8 and 12 years, respectively, while 178 and 283 years of time to corrosion was calculated by time dependent model for inner wall and outer wall, respectively. For time independent model, the probability of corrosion at 100 years of exposure for inner wall and outer wall was ranged 59.5 and 95.5%, respectively, while time dependent model indicated 2.9 and 0.2% of the probability corrosion, respectively. Finally, impact of $C_{lim}$, including values specified in current codes, on the probability of corrosion initiation and corrosion free life is discussed.