• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.25 no.12
• /
• pp.27-33
• /
• 2011

This study aims to suggest some problems, which occur when environmental lighting zone is set by use-zone only, by comparing and analyzing the artificial illumination luminance. In addition, this study aims to review the control standards of light pollution and to suggest a practical environmental lighting zone-setting method. I checked out the standards of average surface luminance and luminance contrast as for light pollution management. In addition, I did some research on evaluation of light pollution on surroundings based on investigation of use-environment as for lighting environment setting method.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.32A no.1
• /
• pp.36-44
• /
• 1995

For a parabolic reflector antenna, a simple method is presented for computing efficiently the average power pattern degradations caused by the surface roughness of the reflector and misalignments between the reflector and the feed. In this procedure, both nonuniform surface errors and nonuniform illuminations are employed. The assumptions to derive the expressions are that in each annular region of the antenna, the rms value of the surface roughness is known, and in a zone in a annular region, the phase error by misalignments is constant, and can be taken to its value at the center of the zone. Detailed parametric studies are performed with derived expressions to determine the effects of those errors and illumination tapers on parameters such as gain and sidelobe levels.

• Laser Solutions
• /
• v.10 no.1
• /
• pp.29-34
• /
• 2007

We propose a novel application of laser engraving to patterning of light guide panel (LGP) for backlight. The feasibility of three-dimensional engraved pattern in the LGP was verified by measuring brightness and uniformity. To improve the overall uniformity, we have modified proposed patterns and found improved design for patterns. The tailoring of pattern by using laser engraving method could endow the controllability of uniformity. The proposed LGPs are more efficient in both average brightness and uniformity of illumination than the conventional LGPs which have surface pattern on the panel.

• Journal of the Korean Society of School Health
• /
• v.4 no.2
• /
• pp.159-175
• /
• 1991

This study was carried out with 2,195 boy and girl middle school students in Inchon to examine environmental elements which may change vision and cause shortsightedness, and also to find out common knowledge of eye health. Its results are as follows. 1) As school year goes up, the normal eye sighted diminish but the visually handicapped regardless of left and right eyes increase. 2) Among weak sighted students below 0.9, boys are 42.2% and girls are 55.3%, the latter are larger by 13.1 %. Vision weakens rapidly especially for third year girl students. 3) Environmental, individual, everyday life elements which cause shortsightedness are studied, (1) environmental elements; illumination in watching TV and studying (2) individual elements; distance from TV and books, posture in studying (3) everyday life elements; hour of watching TV, hour of using game tools average, hour of studying 4) Knowledge of eye health is generally poor without regard to sex and wearing glasses. So adolescent students are in advance educated proper eye care to prevent shortsighted elements.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.8 no.12
• /
• pp.4489-4501
• /
• 2014

We propose a novel lane detection method based on classification in image sequences. Both structural and statistical features of the extracted bright shape are applied to the neural network for finding correct lane marks. The features used in this paper are shown to have strong discriminating power to locate correct traffic lanes. The traffic lanes detected in the current frame is also used to estimate the traffic lane if the lane detection fails in the next frame. The proposed method is fast enough to apply for real-time systems; the average processing time is less than 2msec. Also the scheme of the local illumination compensation allows robust lane detection at nighttime. Therefore, this method can be widely used in intelligence transportation systems such as driver assistance, lane change assistance, lane departure warning and autonomous vehicles.

• Journal of the Optical Society of Korea
• /
• v.16 no.2
• /
• pp.107-114
• /
• 2012

In this paper, we propose a new modulation scheme called multi-coded variable pulse position modulation (MC-VPPM) for visible light communication systems. Two groups of signals (Pulse Width Modulation (PWM) and Pulse Position Modulation (PPM) groups) are multi-coded by orthogonal codes for transmitting data simultaneously. Then, each multi-level value of the multi-coded signal is converted to pulse width and position which results in not only an improved data rate, but also a processing gain in reception. In addition, we introduce average duty ratio and cyclic shift concepts in PWM through which dimming control for light illumination can be supported without any degradation in communication performance. Through simulation, we confirm that the proposed MC-VPPM shows a comparable BER curve and much greater achievable data rate than the conventional VPPM scheme using a visible light optical channel environment.

• KIEAE Journal
• /
• v.7 no.5
• /
• pp.41-46
• /
• 2007

The lightshelf system, a horizontal shading and light redirect device, should improve the visual environment by optimal light distributions and intense illumination levels of a interior. This study aims to evaluate the daylighting performance of window integrated lightshelf systems by computer simulations. For the study, the standard office plan is analyzed through the field surveys. And then, the various lightshelf types attached window systems are picked out from existed research results. The max, minimum and average illuminance levels of interiors and illuminance distributions are evaluated by Lightsacpe 3.2 programs based on the installing height, shape type and moving angle of lightshelfs. As results, it is suggested that the optimum lightshelf shapes are the height 1.8m and the width 600mm. Also, in mixed lightshelf, the outside width 600mm, inside width 400 are efficient on indoor daylighting performance.

• Journal of information and communication convergence engineering
• /
• v.19 no.4
• /
• pp.269-275
• /
• 2021

Light-emitting diodes (LEDs) are modulated using a square wave pulse sequence for flicker prevention and dimming control in visible light communication (VLC). In a VLC transmitter, the high and low bits of the non-return-to-zero (NRZ) data are converted to two square waves of different frequencies, which continue for a finite time defined by the fill ratio in an NRZ bit time. As the average optical power was kept constant and independent of data transmission, the LED was flicker-free. Dimming control is carried out by changing the fill ratio of the square wave in the NRZ bit time. In the experiments, the illumination of the LED light was controlled in the range of approximately 19.2% to 96.2% of the continuous square wave modulated LED light. In the VLC receiver, a high-pass filter combined with a latch circuit was used to recover the transmitted signal while preventing noise interference from adjacent lighting lamps.

• Journal of the Korean Society for Precision Engineering
• /
• v.10 no.3
• /
• pp.168-174
• /
• 1993

A new digital image processing method for measuring of the flank wear of cutting tool is presented. The method is based on computer vision technology in which the tool is illuminated by two halogen lamps and the wear zone is visualized using a CCD camera. The image is converted into digital pixel and processed to detect the wearland width. As a conclusion, it has been proved that the average wearland area and mzximum peak values of the flank wear width can monitored effectively to a measuring resolution of 0.01mm.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.13 no.1
• /
• pp.1-13
• /
• 1980

The purpose of the present study is to find the light intensity which induces maximum gathering rate and to observe the variation of the gathering rate both in daytime and at night by using three species of commercial fishes: filefish, Stephanolepis cirrhifer (Temminck et Schlegel), conger eel, Astroconger myriaster (Brevoort) and crucian carp, Carassius oarassius (Linnaeus). An experimental tank $(360L\times50W\times55Hcm)$ was set up in a dark room. An illumination system was attached to one end of the tank to control horizontal, light intensity. Six artificial light sources were prepared by combination of two light bulbs (5W, 150W) and seven filters. During the experiment water depth was maintained 50 cm level in the tank. The tank was marked into six longitudinal sections each being 60 cm long to observe the distribution of fish. The fish were acclimatized in dark condition for 40 minutes prior to the main experiment. Upon turning on the light, the number of fish .in each section was counted 40 times every 30 seconds, and the gathering rates were obtain from the average number of fish in each section. In filefish the light intensity inducing maximum gathering rate was 0.7 lx(0.5-1.1 lx), and there nab little difference between day and night. Gathering rate varied propotionally to the length of illumination time. In conger eel the light intensities inducing maximum gathering rate were 1.9 lx(1.2-2.9 lx) in daytime and 5.2 lx (3.2-7.7 lx) at night. Thus, there was a considerable difference between day and night, but the gathering rate remained almost unchanged regardless to the length of illumination time. In crucian carp gathering rate did not show a definite pattern hut fluctuated irregularly. The gathering rate, however, was slightly higher at 16.21 lx, and there was little difference between day and night.