• Journal of the Korean Society of Costume
• /
• v.54 no.4
• /
• pp.63-74
• /
• 2004

This study shows that clothes to be just the same as the real thing can be Produced through the third dimension computer graphics, and then presents that not only the area of fashion design can be expanded in the virtual reality field by doing the simulation of the fashion show, but also the information can be made the real time public ownership and the communication can be fulfilled smoothly. In this study, analyzing the third dimension computer graphic programs to be used much at present, Alias Wavefront Company's Maya software which was the most effective in the clothes simulation and the clothes CAD SGS OptiTex 8.7 which went well substitutive for it were used of them. The conclusions of this study that got through the work manufacture are as follows： The first, if the file manufacturing in the clothes CAD by using the computer was stored, the pattern used 3D simulation was available because it could be summoned in 3D software. The second, if the data of DXF form in Maya program was summoned, they could not be applied by Maya Cloth supported in Nurbs only because they were recognized as the DXF＿layer. So the curve along the outer lines of the pattern was drawn and Maya Cloth was applied to be possible to get the natural silhouette of clothes. The third, when the clothes were manufactured by 3D, if the draping character was applied according to the textile special quality, not only the control of textile's thickness, weight, quality feeling, and silhouette was available, but also the clothes were available to graft the special textile materials. The fourth, the natural motion of model was produced by capturing the actual model's walking action In order to produce the fashion show motion and also the dynamic fashion show was available by the angle of camera, the establishment of lighting, and etc. in the final rendering. The clothes manufactured by 3D are available to change the design by changing the materials, or by adding the details, or by utilizing the special materials on clothes. Therefore, the trial and error following at the clothes manufacture can be reduced. But the elevation of the rendering speed, the price down, the strengthening of personal security, and etc. are required.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2004.05a
• /
• pp.106-110
• /
• 2004

In any large heavy industry like that of ship building, there exist a lot of complications for the arrangement of building blocks optimally for the minimal space consumption. The major problem arises at yard because of laxity in space for arranging the building blocks of ship under construction. A standardized erection sequence diagram is generally available to provide the prioritised erection sequence. This erection sequence diagram serves as the frame work. In order to make a timely erection of the blocks a post plan has to be developed so that the blocks lie in the nearest possible vicinity of the material handling devices while keeping the priority of erection. Therefore, the blocks are arranged in the pre-erection area. This kind of readiness of blocks leads to a very complex problem of space. This arises due to the least available space leading to an urgent need of an availability of intelligent spatial schedule without compromising the rate of production. There exists two critical problems ahead namely, the spatial occupation layout of pre-erection area and the emptying pattern in the spatial vicinity. The block shape is assumed be rectangular. The related input data's are the dates of erection (earliest as well as the latest), geometrical parameters of block available on pre-erection area, slack time and the like.

• Journal of Information Processing Systems
• /
• v.2 no.2
• /
• pp.101-106
• /
• 2006

Grid computing is an emerging technology that enables global resource sharing. In Korea, the $K^*$Grid provides an extremely powerful research environment to both industries and academia. As part of the $K^*$Grid project, we have constructed, together with the Korea Institute of Science and Technology Information and a number of domestic universities, a supercomputer Grid test bed which connects several types of supercomputers based on the globus toolkit. To achieve efficient networking in this Grid testbed, we propose a novel method of available bandwidth measurement, called Decoupled Capacity measurement with Initial Gap (DCIG), using packet trains. DCIG can improve the network efficiency by selecting the best path among several candidates. Simulation results show that DCIG outperforms previous work in terms of accuracy and the required measurement time. We also define a new XML schema for DCIG request/response based on the schema defined by the Global Grid Forum (GGF) Network Measurement Working Group (NM-WG).

• Journal of the Korean Society of Clothing and Textiles
• /
• v.29 no.9_10 s.146
• /
• pp.1306-1315
• /
• 2005

Impulse buying has been considered a pervasive and distinctive phenomenon in the modern lifestyle and has been receiving increasing attention from consumer researchers and theorists. In the modern marketplace, spontaneous urges to buy and consume often compete with the practical necessity to delay the immediate gratification that purchasing provides. The purpose of this study is to conceptualize and test the framework of impulse buying behavior for fashion products using structural equation model. Data were obtained from 413 students attending universities during schedules classes in Busan. Analysis of the data, utilizing AMOS 4.1, supported most of the predictions. The results showed that situational variable(time available) and individual variable(fashion involvement) have direct effects on consumers' shopping emotions, including positive and negative emotion. Positive emotions had effects on all types of impulse buying(planned impulse buying, reminded impulse buying, and fashion-oriented impulse buying), while negative emotion affected two types of impulse buying(reminded impulse buying and fashion-oriented impulse buying). These emotional experiences influence impulse buying behaviors for fashion products serving as critical mediators. The findings suggest that time available and fashion involvement are good predictors mediated by shopping emotion to impulse buying behavior for fashion products. The implications of this research for future work on the shopping emotion and impulse buying behavior are discussed.

• International Journal of Concrete Structures and Materials
• /
• v.8 no.3
• /
• pp.185-199
• /
• 2014

As the national transportation infrastructure ages and deteriorates, many existing bridges require frequent and costly maintenance and repairs. The objective of this work was to synthesize new and existing types of beam end coatings and treatments that have been proven to extend the life of new and existing concrete and steel bridge beams. A comprehensive literature review, along with online surveys and phone interviews of State department of transportations (DOTs) and coating manufacturers was conducted to gather information about existing and recently developed technologies. The study revealed that while many promising coatings and treatments are offered on the market, there is a lack of readily available laboratory results that would enable direct comparison of the available methods. This finding applies in terms of the coatings' durability and the potential for extending the service life of existing bridges. Most of the interviewed State DOTs' personnel assessed the products listed in respective DOT's Qualified Products Lists as performing 'well'. However, there was significant variability between states in the type of the products used. Among the agencies contacted, none was able to suggest the most promising or advanced products, either for concrete or steel bridge beam end treatments. This suggests that comprehensive laboratory evaluation would be necessary for selecting the best available beam end treatments and coatings.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2008.05a
• /
• pp.117-121
• /
• 2008

This study investigates practical application of high early strength type concrete using fine particle classifying cement, and the results are summarized as following. The replacement use of FC 30% did not great influence on concrete mix, therefore mixing without additional SP and AE was available using equal mix with OPC. The ratio of increasing temperature by heat of hydration was similar with OPC, and the compressive strength was over then 5MPa at -28℃ outside temperature on 2nd day. Therefore, it is considering that the first purpose, the effect of shortening terms of work by early demolding, will be available. The rebound rate of type "P" schumidt hammer was relative with compressive strength, and the rebound rate for verifying 5MPa of compressive strength was estimated about 55 considering rate of safety. Therefore, assuming demolding date is available efficiently.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.5 no.5
• /
• pp.442-446
• /
• 2004

Computer simulation of a swaging manufacturing process is presented in this paper. Commercially available software has been used to develop the simulation algorithm. Based on the experience gained from trial runs, simulation of a tube swaging process has been carried out. The material parameters "n" (strain hardening exponent) and "K" (plastic modulus) are obtained from actual tensile test measurements of the tube material. Two different geometries for the die and the tube have been used in this work and a comparison made. Numerical simulation of the swaging process has been performed using the commercially available HyperMesh(r) for pre-processing, LS-DYNA(r) for analysis and LS-TAURUS(r) for post-processing. Some of the results obtained from this study are compared with those available in the literature.

• International Journal of Computer Science & Network Security
• /
• v.22 no.10
• /
• pp.223-229
• /
• 2022

LinkedIn is one of the most job hunting and career-growing applications in the world. There are a lot of opportunities and jobs available on LinkedIn. According to statistics, LinkedIn has 738M+ members. 14M+ open jobs on LinkedIn and 55M+ Companies listed on this mega-connected application. A lot of vacancies are available daily. LinkedIn data has been used for the research work carried out in this paper. This in turn can significantly tackle the challenges faced by LinkedIn and other job posting applications to improve the levels of jobs available in the industry. This research introduces Text Processing in natural language processing on datasets of LinkedIn which aims to find out the jobs that appear most in a month or/and year. Therefore, the large data became renewed into the required or needful source. This study thus uses Multinomial Naïve Bayes and Linear Support Vector Machine learning algorithms for text classification and developed a trained multilingual dataset. The results indicate the most needed job vacancies in any field. This will help students, job seekers, and entrepreneurs with their career decisions

• Geomechanics and Engineering
• /
• v.30 no.5
• /
• pp.437-448
• /
• 2022

Alluvial soil is challenging to work with due to its high compressibility. Thus, consolidation settlement of this type of soil should be accurately estimated. Accurate estimation of the consolidation settlement of alluvial soil requires accurate prediction of compressibility parameters. Geotechnical engineers usually use empirical correlations to estimate these compressibility parameters. However, no attempts have been made to develop correlations to estimate compressibility parameters of alluvial soil. Thus, this paper aims to develop new models to predict the compression and recompression indices (Cc and Cr) of alluvial soils. As part of the study, geotechnical laboratory tests have been conducted on large number of undisturbed samples of local alluvial soil. The obtained results from these tests in addition to available results from the literature from different parts in the world have been compiled to form the database of this study. This database is then employed to examine the accuracy of the available empirical correlations of the compressibility parameters and to develop the new models to estimate the compressibility parameters using the nonlinear regression analysis. The accuracy of the new models has been accessed using mean absolute error, root mean square error, mean, percentage of predictions with error range of ±20%, percentage of predictions with error range of ±30%, and coefficient of determination. It was found that the new models outperform the available correlations. Thus, these models can be used by geotechnical engineers with more confidence to predict Cc and Cr.

• Journal of Information Technology Services
• /
• v.14 no.2
• /
• pp.355-373
• /
• 2015

Social networking services (SNSs) serve to strengthen people's social relationships by providing ways for people to utilize such relationships especially like workplace. With the development of the internet worldwide, the number of SNS users is rapidly growing and a wider range of service types have become available. In this study, we designed a research model with a focus on what makes people use SNSs at workplace and how it is associated with changes in relationship quality and their intention to continue using the services and analyzed data collected for the research model. Theoretically, intrinsic and extrinsic motivation was invoked and measured, in terms of hedonic and utilitarian values, and satisfaction and trust were adopted as variables of relationship quality. Data were collected from Facebook users using workplace, and a partial least squares (PLS) analysis was made on 188 data points. The analysis results showed that two forms of motivation-hedonic and utilitarian-are separated from each other in their influence and that utilitarian value is more important than hedonic value, especially when it comes to users' satisfaction. In addition, the analysis found a weak relationship between satisfaction and trust in SNS environments; this was a little different from the results of previous studies.