• Korean Journal of Soil Science and Fertilizer
• /
• v.10 no.1
• /
• pp.49-53
• /
• 1977

In order to know the effect of lime application on the phosphorus and silicate, lime and phosphorus were applied in the soil where phosphorus concentration was low and pH 5.4 The results are as follows 1. The filled grain ratio increases by applying the lime in moderate quantity, conversely the large amount of lime reduced the number of panicles per hill and number of spikelets per panicle. 2. The phosphorus application increased the panicle number, grain number and filled grain ratio. Similarly the yield was also significantly increased. 3. Among the inorganic matter of plant absorbed at the heading time the nitrogen contents was highly correlated with the number of heads, grain number per head and yield, while contents of $P_2O_5$ and $SiO_2$ were significantly correlated with the grain number maturerate and yield respectively. 4. Under the lime application the silica of soil was partly correlated with yield and yield components. But there was a significant difference between contents of $P_2O_5$ in soil and yield componentas. And in the plot of double application of neutralizing lime, significance of 1% level was shown between the $P_2O_5$ in soil and the panicles number and grain number respectively, where as significance of 5% with yield. 5. The phosphorus concentration in soil was gradually increased by the increment of lime application. Also the rate of available silicate in soil was considerably increased by the increment of lime application. That is, the silicated concentration in soil was 86ppm with lime and 59ppm without lime.

• Korean Journal of Soil Science and Fertilizer
• /
• v.50 no.3
• /
• pp.150-161
• /
• 2017

This study was conducted with the data of monitoring on soil chemical properties of rice paddy soils in Gyeongbuk Province. The selected soil chemical properties were analyzed every 4 year from 1999 to 2015. The soil pH measured in 2015 was higher than pH 6.0, which was 0.3-0.4 pH unit higher than data until 2007 survey year. The mean content of organic matter was greater than $24g\;kg^{-1}$ since 2003, but 35% of soil samples remained below the recommended level ($20-30g\;kg^{-1}$) in 2015. The mean concentration of available phosphate was maintained at $40mg\;kg^{-1}$ higher than the upper recommendation level ($80-120mg\;kg^{-1}$), and more than 40% of paddy soils tested were found to have less than the recommendation level during the survey period. The exchangeable K concentration ranged from 0.25 to $0.39cmol_c\;kg^{-1}$. Exchangeable Ca showed an average at the optimum range ($5.0-6.0cmol_c\;kg^{-1}$) during the monitoring period. Exchangeable Mg decreased linearly ($0.02cmol_c\;kg^{-1}\;year^{-1}$) from $1.55cmol_c\;kg^{-1}$ as of 1999 to below the lower level of the recommendation range ($1.5-2.0cmol_c\;kg^{-1}$). The amount of available $SiO_2$ was increased significantly from 2011 to over the recommendation level (${\geq}157mg\;kg^{-1}$). It was revealed that the soil chemical properties of rice paddy fields was influenced by topology, soil texture, type and region as result of principal component analysis or cluster analysis. Therefore, an assessment on chemical properties of rice paddy soils should be performed to consider various soil physical conditions and agronomic practices such as fertilization, cropping system, and so on. Because of the high variability of nutrient levels across Gyeongbuk Province, nutrient management based on soil fertility test is required by respective farm land unit.

• Korean Journal of Soil Science and Fertilizer
• /
• v.46 no.2
• /
• pp.73-80
• /
• 2013

Due to the fact that possible risk associated with soil-crop-food chain transfer, metal contamination in croplands has become a major topic of wide concern. Accumulation of toxic metals in edible parts of crops grown in contaminated soils has been reported from number of crops including rice, soybean, wheat, maize, and vegetables. Therefore, in order to ensure food safety, measures are needed to be taken in mitigating metal pollution and subsequent uptake by crop plants. Present paper critically reviewed some of the cost effective remediation techniques used in minimizing metal uptake by crops grown in contaminated soils. Liming with different materials such as limestone ($CaCO_3$), burnt lime (CaO), slaked lime [$Ca(OH)_2$], dolomite [$CaMg(CO_3)_2$], and slag ($CaSiO_3$) has been widely used because they could elevate soil pH rendering metals less-bioavailable for plant uptake. Zn fertilization, use of organic amendments, crop rotation and water management are among the other techniques successfully employed in reducing metal uptake by crop plants. However, irrespectively the mitigating measure used, heterogeneous accumulation of metals in different crop species is often reported. The inconsistency might be attributed to the genetic makeup of the crops for selective uptake, their morphological characteristics, position of edible parts on the plants in respect of their distance from roots, crop management practices, the season and to the soil characteristics. However, a sound conclusion in this regard can only be made when more scientific evidence is available on case-specific researches, in particular from long-term field trials which included risks and benefits analysis also for various remediation practices.

• Korean Journal of Soil Science and Fertilizer
• /
• v.22 no.4
• /
• pp.265-270
• /
• 1989

Soil properties for the limestone-derived soil were examined to relate soil formation to stratigraphy of parent materials and hillslope positions in Bangjeol Ri, Yeongweol Eup, Gangweon Do. Pyeongchang, Anmi, Yulgog and Mungyeong series were described for topographic positions such as shoulder position, footslope, terrace and local bottom associated with toposequence where the landscape consisted of gently rolling hillslopes and nearly level plains. 1. Pyeongchang, Anmi, Yulgog and Mungyeong series had the standard hue of the 2.5YR, 5YR, 10YR and 2.5Y, respectively. Thus, color sequence of soil could be related to hillslope positions on the landscape. 2. With ascending slope toward summit, the clay content increased while silt content decreased 3. Silt/Clay ratios ranged from 0.27 to 3.76 and it was increased with descending to bottom. It, also, appeared that maturity of soil was higher at summit position than at bottom. 4. Soils developed in limestone were neutral in soil reaction and very low in available $P_2O_5$. OM, available $SiO_2$, CEC, and active Fe in soils seemed to be increased with ascending to summit position.

• Korean Journal of Soil Science and Fertilizer
• /
• v.18 no.1
• /
• pp.14-19
• /
• 1985

This study was conducted to evaluate the effects of red earth addition in sandy loam paddies. Clay contents of the red earths were 19% (loam) and 35% (clay loam). The treatments were 3 levels of red earth and 2 levels of fertilizer. The results were summerized as follows: 1. Water decrease rate was lowered with the increase of clay by the red earth application in sandy loam paddies. 2. Red earth addition increased CEC and available $SiO_2$ in sandy loam, and integrated soil improvement showed higher pH and lower Eh than standard fertilizer application. 3. Rice yields in the red earth addition of loam were decreased by 2-3% at standard fertilizer application and increased by 2-4% at integrated soil improvement. Otherwise, rice yields in the red earth application of clay loam were increased by 1-4% at standard fertilizer application and 3-8% at integrated soil improvement.

• Korean Journal of Soil Science and Fertilizer
• /
• v.32 no.3
• /
• pp.295-303
• /
• 1999

An experiment was conducted to evaluate the possibility of using basic oxygen furnace (BOF) slag as a soil conditioner in rice paddy field. In 1997, rice (Oryza sativa B. cv. Dongjinbyeo) crop was cultivated under different application rates of BOF slag at three different places, Inandong Sunchon city, Youjunglee Bosung province, and Nampyung Najoo city. In each paddy field, five treatments, four application rate of BOF slag (0, 4, 8, $12Mg\;ha^{-1}$) and one application rate of lime ($2Mg\;ha^{-1}$) were tried with three replications. Plant height, number of tillers per hill, leaf area per hill, leaf dry weight, calm dry weight or shoot dry weight per hill were measured five times at the interval of seven days. Chemical contents of rice plants and soil were also measured at the same sampling date Yield were estimated by harvesting $6.6m^2$ per experimental unit and yield components were measured by sampling 10 plants per experimental unit at the harvest date. Application of BOF slag hardly affected contents of soil organic matter, available phosphate and potassium in soil. Soil pH and contents of Ca, Mg, Fe and $SiO_2$ enhanced as BOF slag rate increased. Enhancement of soil pH by ROF slag treatment appeared to be closely related with increase in soil Ca content. Application tate of $2Mg\;ha^{-1}$ of lime showed almost the same effect, in increase of soil Ca content as application rate of $4{\sim}8Mg\;ha^{-1}$ of BOF slag, Fe content in soil decreased sharply as time passed after slag treatment and stabilized more or less at the later sampling date. Contents of inorganic matter in plant such as total nitrogen, phosphate, potassium and Mg were not affected by BOF slag treatment. However, contents of Ca, Fe, and $SiO_2$ in plants increased as slag rate became higher. The growth of rice plants with BOF slag treatment was more or less slower but continued persistently up to the later growth stage, so that growth of plants with BOF slag treatment was almost the same nr even greater than that of control or lime treatment. However, BOF slag rate of $12Mg\;ha^{-1}$ seemed to be too high because all the measurements of plant, growth at this rate showed lower values than those of other treatments at all the sampling dates. Treatments of BOF slag $4Mg\;ha^{-1}$ or $8Mg\;ha^{-1}$ showed higher rough rice yield than other treatments, so that the optimum BOF slag ratein rice paddy field seemed to be in the rage of $4{\sim}8Mg\;ha^{-1}$.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.20 no.5
• /
• pp.1671-1678
• /
• 1996

In external chemical vapor deposition processes including VAD and OVD the distribution of flame-synthesized silica particles is determined by heat and mass transfer limitations to particle formation. Combustion gas flow velocities are such that the particle diffusion time scale is longer than that of gas flow convection in the zone of particle formation. The consequence of these effects is that the particles formed tend to remain along straight smooth flow stream lines. Silica particles are formed due to oxidation and hydrolysis. In the hydrolysis, the particles are formed in diffuse bands and particle formation thus requires the diffusion of SiCl$\_$4/ toward CH$\_$4//O$\_$2/ combustion zone to react with H$\_$2/O diffusing away from these same zones on the torch face. The conversion kinetics of hydrolysis is fast compared to diffusion and the rate of conversion is thus diffusion-limited. In the language of combustion, the hydrolysis occurs as a Burke-Schumann process. In selected conditions, reaction zone shape and temperature distributions predicted by the Burke-Schumann analysis are introduced and compared with experimental data available. The calculated centerline temperatures inside the reaction zone agree well with the data, but the calculated values outside the reaction zone are a little higher than the data since the analysis does not consider diffusion in the axial direction and mixing of the combustion products with ambient air. The temperatures along the radial direction agree with the data near the centerline, but gradually diverge from the data as the distance is away from the centerline. This is caused by the convection in the radial direction, which is not considered in the analysis. Spatial distribution of silica particles are affected by convection and diffusion, resulting in a Gaussian form in the radial direction.

• Korean Journal of Environmental Agriculture
• /
• v.38 no.4
• /
• pp.273-280
• /
• 2019

BACKGROUND: The reclaimed lands for agricultural use managed by the Korean government is consisted of 17,145 hectares of lands under construction and 13,384 hectares of completed lands. In order to utilize these reclaimed lands as competitive agricultural complexes, the government is preparing to develop comprehensive development plans for multiple purposes. For rational land-use planning and soil management, information of the soil chemical properties is necessary. METHODS AND RESULTS: From 2013 to 2016, soil samples were collected from 85 representative sampling sites of the reclaimed lands and analyzed for soil chemical properties including electric conductivity (EC), pH, soil organic matter (SOM), and nutrients. The annual mean soil EC ranged from 5.1 to 8.3 dS m^-1 and have continued to decrease over the years (estimation equation with EC as dependent and year as independent variable was y =0.0736x² - 1.4985x + 9.8305, R² = 0.9753). The pH ranged from 7.3 to 7.6, which was higher than the optimum range (5.5~7.0) for agricultural soils. Soil organic matter (8 to 11 g kg^-1) was lower level than the optimum range (20~30 kg^-1). Available silicate (Av.SiO₂) ranged from 169 to 229 mg kg^-1, which was close to the minimum content (≥157 mg kg^-1) for rice paddy field. Available phosphate (Av.P₂O₅) content (24~39 mg kg^-1) was lower than the optimum range (80~120 mg kg^-1) for rice paddy field. CONCLUSION: For efficient agricultural use of reclaimed lands under government management, our results suggest that the application of organic matter and supplying deficient nutrients as well as desalinization is required.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.96-97
• /
• 2012

In nitride and oxide film deposition, sputtered metals react with nitrogen or oxygen gas in a vacuum chamber to form metal nitride or oxide films on a substrate. The physical properties of sputtered films (metals, oxides, and nitrides) are strongly influenced by magnetron plasma density during the deposition process. Typical target power densities on the magnetron during the deposition process are ~ (5-30) W/cm2, which gives a relatively low plasma density. The main challenge in reactive sputtering is the ability to generate a stable, arc free discharge at high plasma densities. Arcs occur due to formation of an insulating layer on the target surface caused by the re-deposition effect. One current method of generating an arc free discharge is to use the commercially available Pinnacle Plus+ Pulsed DC plasma generator manufactured by Advanced Energy Inc. This plasma generator uses a positive voltage pulse between negative pulses to attract electrons and discharge the target surface, thus preventing arc formation. However, this method can only generate low density plasma and therefore cannot allow full control of film properties. Also, after long runs ~ (1-3) hours, depends on duty cycle the stability of the reactive process is reduced due to increased probability of arc formation. Between 1995 and 1999, a new way of magnetron sputtering called HIPIMS (highly ionized pulse impulse magnetron sputtering) was developed. The main idea of this approach is to apply short ${\sim}(50-100){\mu}s$ high power pulses with a target power densities during the pulse between ~ (1-3) kW/cm2. These high power pulses generate high-density magnetron plasma that can significantly improve and control film properties. From the beginning, HIPIMS method has been applied to reactive sputtering processes for deposition of conductive and nonconductive films. However, commercially available HIPIMS plasma generators have not been able to create a stable, arc-free discharge in most reactive magnetron sputtering processes. HIPIMS plasma generators have been successfully used in reactive sputtering of nitrides for hard coating applications and for Al2O3 films. But until now there has been no HIPIMS data presented on reactive sputtering in cluster tools for semiconductors and MEMs applications. In this presentation, a new method of generating an arc free discharge for reactive HIPIMS using the new Cyprium plasma generator from Zpulser LLC will be introduced. Data (or evidence) will be presented showing that arc formation in reactive HIPIMS can be controlled without applying a positive voltage pulse between high power pulses. Arc-free reactive HIPIMS processes for sputtering AlN, TiO2, TiN and Si3N4 on the Applied Materials ENDURA 200 mm cluster tool will be presented. A direct comparison of the properties of films sputtered with the Advanced Energy Pinnacle Plus + plasma generator and the Zpulser Cyprium plasma generator will be presented.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.1B
• /
• pp.51-60
• /
• 2006

Water quality improvement in mattress/filter system using porous material like slag from industrial activity and zeolite that has been studied for environment improvement and pollution abatement is very useful in polluted stagnant stream channel. Slag is consisted of CaO, $SiO_2$, $Al_2O_3$ and $Fe_2O_3$. Slag with large specific surface area of porosity has been used such as sludge settling and adsorptive materials. Because slag is porous, it can be used for purification filter. As slag is used as filled materials of mattress/filter system and the system has good advantages for the waste water treatment, water recycling, and the improvement of water quality at the same time and so on. Because zeolite has much advantage of cation exchange, adsorption, catalyst and dehydration characteristics, It is used for environment improvement of livestock farms, treatment of artificial sewage and waste water, improvement of drinking water quality, radioactive waste disposal and radioactive material pollution control. In this study, according to verifying effects of water quality improvement of fill materials by porosity that 38.6%, 45.8% and 49.8% respectively in the stagnant stream channel, water quality monitoring of inflow and outflow was conducted on pH, DO, BOD, COD, SS, T-N and T-P. Mattress/filter system was able to accelerate water quality improvement by biofilter as waste water flows through gap of mattress/filter fill materials and by contact catalysis, absorption, catabolism by biofilm. Mattress/filter system used slag and zeolite forms biofilm easily and accelerates adsorption of organic matter. As a result, mattress/filter system increases water self-purification and accelerates water quality improvement available for stream water clean-up.