• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.397-402
• /
• 2005

In this paper, to improve the efficiency of welding and user convenience in the shipbuilding industry, a PC-based off-line programming (OLP) technique and the development of a robot transfer unit are presented. The developed OLP system is capable of not only robot motion simulations but also automatic generations of a series of robot programs. The strength of the developed OLP system lies in its flexibility in handling the changes of the welding robot's target objects. Moreover, for a precise transfer of the robot to a desired location, an auxiliary mobile platform named a robot-origin-transfer-unit (ROTU) was developed. To enhance the cornering capability of the platform in a narrow area, the developed ROTU is equipped with 2 steering wheels and 1 driving wheel. Both the OLP and the ROTU were field-tested and their performances were proven successful.

• International Journal of Control, Automation, and Systems
• /
• 제3권1호
• /
• pp.32-42
• /
• 2005

In this paper, to improve the efficiency of welding and user convenience in the shipbuilding industry, a PC-based off-line programming (OLP) technique and the development of a robot transfer unit are presented. The developed OLP system is capable of not only robot motion simulations but also automatic generations of a series of robot programs. The strength of the developed OLP system lies in its flexibility in handling the changes of the welding robot's target objects. Moreover, for a precise transfer of the robot to a desired location, an auxiliary mobile platform named a robot-origin-transfer-unit (ROTU) was developed. To enhance the cornering capability of the platform in a narrow area, the developed ROTU is equipped with 2 steering wheels and 1 driving wheel. Both the OLP and the ROTU were field­tested and their performances were proven successful.

• 대한기계학회논문집B
• /
• 제36권8호
• /
• pp.791-796
• /
• 2012

항공기용 소형 가스터빈엔진은 항공기의 주엔진 시동을 위한 압축공기 공급, 비상 전원 등을 위한 보조동력장치로 사용된다. 항공기가 모래와 먼지가 함유된 대기 조건에서 운용되는 경우, 보조동력장치와 엔진에 대기 중 모래와 먼지가 유입되며, 이러한 모래 먼지 유입은 가스터빈엔진의 마모, 성능 저하 등을 야기시킨다. 본 연구에서는 모래와 먼지가 소형 가스터빈엔진에 유입되는 경우에 대하여 그 영향성을 고찰하였다. 시험에서의 모래와 먼지 농도는 공기 단위 질량당 $4.4{\times}10^{-5}kg$ 이며, 이는 미 군사규격인 MIL-E-8593 에 제시된 조건과 동일하다. 모래 먼지 유입시험은 총 10 시간 동안 수행되었으며, 시험 전 후의 성능시험을 통해 성능 영향성을 고찰하였다. 또한, 임펠러, 터빈휠 등 주요 구성품에 대하여 분해검사를 수행하여 마모 특성에 대하여 고찰하였다.

• 한국생산제조학회지
• /
• 제20권4호
• /
• pp.440-445
• /
• 2011

This paper presents a new regenerative brake system of electric vehicles that employs a continuous variable transmission(CVT) and a flywheel. The developed device has advantages over existing regenerative brakes from a standpoint of reliability and versatility in actual driving conditions. The system consists of a CVT, two wheels, a flywheel, a coupling and auxiliary powertrain components. The CVT is designed as a combination of two cones and a roller, which causes the velocity difference between the wheel and the flywheel. The power flow of the flywheel system is controlled by the CVT roller and the coupling through step motors. A prototype has been developed and then its performance has been investigated for various operating conditions. Results show that the storage efficiency of the flywheel is much affected by the vehicle's velocity and it is reduced below 20% for high speed, as compared to the 25% efficiency for an ideal condition. The CVT is a primary factor for lowering the flywheel efficiencies due to large friction and slipping between the cone and the roller.

• 한국산업융합학회 논문집
• /
• 제23권2_2호
• /
• pp.233-244
• /
• 2020

A double-parked car is the one that is parked in a crowded parking lot with its transmission gear in neutral position and its auxiliary brake released. A double-parked car can be moved by pushing it but doing so is very difficult and dangerous. In a previous study, we proposed an omni-directional mobile robot for moving a double parked car. In that study we adopted Mecanum wheels. Even though the proposed robot showed successful results, it has some drawbacks such as dependency on a load condition, complexity in control, inefficiency in power use, etc. To overcome those drawbacks, we propose a differential drive robot with ordinary two tire wheels. The proposed robot consists of two parts, one is a wheel part and the other is a body part. By selectively connecting or disconnecting those two parts with the aid of an electric brake, the proposed robot is able to have omni-directional mobility.

• Journal of Advanced Marine Engineering and Technology
• /
• 제36권7호
• /
• pp.935-941
• /
• 2012

This paper describes a study of conventional electrical rig and simulated application of Flywheel Energy Storage system on the power system of the offshore plants with dynamic positioning system with the following aims: improve fuel consumption on engines, prevent blackout and mitigate voltage sags due to pulsed load and fault. Fuel consumption has been analyzed for the generators of the typical drilling rigs compared with the power plant with Flywheel Storage Unit which has an important aid in avoiding power interruption during DP (Dynamic Positioning) operation. The FES (Fly wheel Energy storage System) releases energy very quickly and efficiently to ensure continuity of the power supply to essential consumers such as auxiliary machinery and thrusters upon main power failure. It will run until the standby diesel generator can start and supply the electric power to the facilities to keep the vessel in correct position under DP operation. The proposed backup method to utilize the quick and large energy storage Flywheel system can be optimized in any power system design on offshore plant.

• 센서학회지
• /
• 제24권3호
• /
• pp.175-180
• /
• 2015

Worldwide, studies on intelligent vehicles for the convenience of drivers have been actively conducted as the number of cars has increased. However, vehicle convenience enabled by buttons lowers the concentration on driving and hence poses as a huge threat to the safety of the driver. The use of one of the convenient features, impaired driving auxiliary equipment, is limited because of its complex usage, and this device also hinders the front view of the driver. This paper proposes a vehicle-control device for controlling the convenient features as well as changes in speed and direction using gestures and motions of the driver. This device consists of an ultrasonic sensor for recognizing movement, an arduino for accepting signal control functions and servo and DC motors apply to various vehicle parts. Firstly, the vehicle-control device was designed using a 3D CAD program known as Solid-works based on the size of the steering wheel. Then, through simulations, a suitable length for minimizing the absorbent between ultrasonic sensors was confirmed using a program known as COMSOL Multiphysics. Finally, simulation results were verified through experiments, and the optimal size of the device was identified through the number of errors.

• 한국산림과학회지
• /
• 제100권2호
• /
• pp.154-164
• /
• 2011

본 연구는 우리나라 험준한 급경사 지형의 단목중심의 목재생산시스템 등에 적합하고 사방사업, 임도사업 등의 다양한 산림작업에 유용하게 활용할 수 있는 다목적의 반궤도식 산림작업차 개발을 목적으로 실시하였다. 산림작업차량의 기본 차체는 최소회전반경 설계기준과 작업도 폭을 고려하여 차체프레임부의 총길이는 5,750 mm, 차체의 폭은 1,900 mm, 적재부의 적재용량은 약 $2.5m^{3}$으로 설계 제작하였다. 동력원은 3,400 rpm의 최대 96마력 출력의 엔진을 선정하였으며, 유압펌프는 2개의 주펌프와 2개의 보조펌프로 나누어 선정하고, 주펌프는 전후좌우 4개의 주행용 유압모터에 사용하고, 보조펌프는 각종 작업기에 사용하도록 설계 제작하였다. 동력전달방식은 HST(Hydro-Static Transmission) 시스템을 적용하였고, 주행부는 조향가능한 전방 고무바퀴와 무한 궤도형으로 회전하는 후방 크롤러로 설계 제작하고, 조향방식은 애커만 조향방식을 채택하였다. 주행조작부는 일반 자동차의 운전 및 운전석 형태로 설계 제작하였으며, 보조장치로 윈치와 로그그래플 및 아웃트리거를 장착하였다. 시작기의 공차시 임도의 주행속도는 저속 5.3 km/hr, 고속 7.7 km/hr로 나타났다.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1991년도 가을 학술발표회 논문집
• /
• pp.111-114
• /
• 1991

The KMRR 4-wheel crane which has a span of 30.6m long shall be designed to maintain its structural integrity during and after seismic shocks. Horizontal and vertical FRS for OBE and SSE conditions at the crane support are after seismic shock. Horizontal and vertical FRS for analysis are 4% for OBE and 7% for SSE. The crane consists of girder, saddle main and auxiliary trolley, and necessaries. They are modeled as beam elements and lumped masses for the following 4 cases ; trolley at center of the crane with and without the rated load, trolley at end with and without the rated load. The static analysis as well as the linear dynamic analysis including frequency and response spectrum analysis are performed for the seismic qualification of the crane using the Finite Element Method. For the simplicity of the analysis, the decoupling criteria are considered for the crane rope and the crane supporting beams. The main sections of the crane are stiffened until the calculated stresses satisfy the allowable limits. The seismic resultant loads are used to design the seismic restraints of the saddle and the trolley to protect the clue from the seismic uplifting loads the study results have show that the seismic design of the KMRR crane is governed by the OBE condition. not by the SSE condition. This paper briefly describes the analysis procedure used in the seismic design of the KMRR crane, and summarizes the analysis results.

• 산업융합연구
• /
• 제17권4호
• /
• pp.125-129
• /
• 2019

자전거를 이용하는 사람들의 수가 증가함에 따라 자전거 사고의 수도 증가하고 있습니다. LED 조명을 사용하면 자전거를 탈 때 자전거 사고를 최대 11 % ~ 44 %까지 줄일 수 있습니다. 자전거의 헤드라이트는 자전거 라이더의 반대쪽에 노출 효과를, 미등은 후면 자전거 라이더에 노출 효과를 제공하여 안전성을 향상시킵니다. 본 연구에서는 제어 버튼 신호에 응답하여 LED에 의한 방향 전환을 표시 할 수 있는 자전거 안전장치를 구현 하였다. 이 신호는 고정 된 시간 동안 자전거의 페달과 휠에 장착 된 LED 조명을 모듈 유형의 발광 또는 깜박임으로 만듭니다. 야간에 자전거를 타는 사람이 자전거를 타는 경우 LED를 사용하여 안전을 향상시킬 수 있는 페달의 자전거 보조 장치가 본 연구에서 개발되었습니다. 무선 통신 기술을 적용한 자전거 안전장치는 미래에 에너지, 환경 및 안전과 같은 사회적 문제를 해결하기 위한 대체 기술이 될 것으로 예상됩니다.