• Journal of Information Management
• /
• v.23 no.1
• /
• pp.39-62
• /
• 1992

In this paper about 60 auxiliary words and 320 stopwords are selected from analysis of sample data, four types of stop word are classified left, right and - auxiliary word truncation & normal. And a keyword extraction system is suggested which undertakes efficient truncation of auxiliary word from words, conversion of Chinese word to Korean and exclusion of stopword. The selected keyeords in this system show 92.2% of accordance ratio compared with manually selected keywords by expert. And then compound words consist of $4{\sim}6$ character generate twice of additional new words and 58.8% words of those are useful as keyword.

• Journal of Magnetics
• /
• v.18 no.3
• /
• pp.352-356
• /
• 2013

Recently, the stationary discontinuous armature, Permanent Magnet Linear Synchronous Motor (PM-LSM), was suggested as a driving source for long-distance transportation system. However, as these motors arrange armatures discontinuously, an edge occurs thereby leading to a cogging force. This works as a factor that hinders the acceleration and deceleration that takes place when movers enter into and eject from armatures. Therefore, in this study, the installation of auxiliary teeth on the edge of the armature of PM-LSM is suggested in order to reduce the cogging force caused by the edge when the armature is placed in a discontinuous arrangement. Auxiliary teeth are optimally designed by a 2-D numerical analysis using the finite element method was performed to generate the optimum design of the auxiliary teeth. The validity of the study was confirmed through the comparison of the cogging force induced at the edge in respect to the design parameter using the basic model.

• Korean Journal of Clinical Pharmacy
• /
• v.16 no.1
• /
• pp.9-13
• /
• 2006

Patient counseling is emerging as one of the most important roles of community pharmacists because the information on the standard labeling for the prescription drug is not sufficient to ensure the correct use of the drug. However, excessive workload of the community pharmacists in Korea discourages the provision of the effective patient counseling. The use of auxiliary label may be an efficient tool to help patients correctly use the prescription drug in this situation. As a preliminary study to encourage the use of auxiliary label, we have performed a survey analysis of familiarity and willingness of community pharmacists to use the auxiliary label. About three quarters of the participating community pharmacists have heard of the auxiliary label, however, there was not a single pharmacist who uses the label. Furthermore, only one fifth of the participating pharmacists were willing to use the label if they have to purchase. Therefore, it is recommended that governmental and non-profit organizations such as Korean Pharmaceutical Association educate community pharmacists regarding usefulness of the auxiliary label with focus on enhancing patient compliance and constrainment of healthcare expense.

• Communications for Statistical Applications and Methods
• /
• v.17 no.1
• /
• pp.9-16
• /
• 2010

The sampling design for the spatial population studies needs a model assumption of a dependent relationship, where the interesting parameters can be the population mean, proportion and area. We know that the study of an interested spatial population, which is stratified by a geographical condition or shape, and the degree of distort of an estimation area is much useful. In light of this, if auxiliary information of the target variable such as wasted area contaminated by some material and the degree of distribution of animal or plants is available, then the spatial estimator might be improved through the calibration procedure. In this research, we propose the calibration procedure for the spatial stratified sampling in which we consider the one and two-dimensional auxiliary information.

• Journal of the Korean Society for Library and Information Science
• /
• v.46 no.3
• /
• pp.181-201
• /
• 2012

This study aims to analyze and compare the structures of auxiliary tables regarding places - for example, Korea using several decimal classification systems such as DDC, UDC, KDC and NDC. For each auxiliary table, the codes were described in detail and the special characteristics were discussed. The common characteristics and the different aspects of different decimal classification systems were investigated as well as divisions of Korea in Korean Wikipedia and an administrative district classification system. This study suggests a new basic summary for the expansion of codes of Korea in auxiliary table in DDC with its principles and options and it will be useful for revising process of many decimal classification systems.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.42 no.2 s.302
• /
• pp.49-58
• /
• 2005

A new soft switching three-phase PWM rectifier with simple circuit configuration and high efficiency has been developed. The proposed circuit is a kind of the auxiliary resonant commutated Pole(ARCP)converter The conventional ARCP converter requires three-auxiliary reactors and six-auxiliary switches for the soft switching auxiliary circuit and for these switching elements, a gate drive circuit and a control circuit are required, resulting in high part as a disadvantage. In the main circuit proposed in this paper, the auxiliary soft switching circuit is composed of two-auxiliary reactors, two-auxiliary switches and several diodes. In addition, common use of the PWM control circuit for two-switches will make the control circuit of the auxiliary switches simple. By means of function of the soft switching auxiliary circuit, the main switching element performs zero voltage switching operation and the auxiliary switches perform the zero current switching. In this paper, the circuit configuration and the operational analysis of the proposed circuit are described at first and then, experimental results will be reported. By using a prototype with 5[kW] capacity, the conversion efficiency of maximum $98.8[\%]$ and the power factor of $99[\%]$ or higher were obtained.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.39 no.6
• /
• pp.563-569
• /
• 2021

With the launch of Compact Advanced Satellite 500 series of various characteristics and the operation of KOMPSAT-3/3A, uses of high-resolution satellite images have been continuously increased. Especially, in order to provide satellite images in the form of ARD (Analysis Ready Data), various pre-processing such as geometric correction and radiometric correction have been developed. For pre-processing of high spatial satellite imagery, auxiliary information, such as solar zenith, solar azimuth and offnadir angle, should be required. However, most of the high-resolution satellite images provide the solar zenith and nadir angle for the entire image as a single variable. In this paper, the solar zenith and offnadir angle corresponding to each pixel of the image were calculated using RFM (Rational Function Model) and auxiliary information of the image, and the quality of extracted information were evaluated. In particular, for the utilization of pixel-based solar zenith and offnadir angle, pixel-based auxiliary data were applied in calculating the top of atmospheric reflectance, and comparative evaluation with a single constant-based top of atmospheric reflectance was performed. In the experiments using various satellite imagery, the pixel-based solar zenith and offnadir angle information showed a similar tendency to the auxiliary information of satellite sensor, and it was confirmed that the distortion was reduced in the calculated reflectance in the top of atmospheric reflectance.

• Journal of Power Electronics
• /
• v.13 no.4
• /
• pp.558-568
• /
• 2013

In this paper, a new decoupling technique for a flyback inverter using an active power decoupling circuit with auxiliary winding and a novel switching pattern is proposed. The conventional passive power decoupling method is applied to control Maximum Power Point Tracking (MPPT) efficiently by attenuating double frequency power pulsation on the photovoltaic (PV) side. In this case, decoupling capacitor for a flyback inverter is essentially required large electrolytic capacitor of milli-farads. However using the electrolytic capacitor have problems of bulky size and short life-span. Because this electrolytic capacitor is strongly concerned with the life-span of an AC module system, an active power decoupling circuit to minimize input capacitance is needed. In the proposed topology, auxiliary winding defined as a Ripple port will partially cover difference between a PV power and an AC Power. Since input capacitor and auxiliary capacitor is reduced by Ripple port, it can be replaced by a film capacitor. To perform the operation of charging/discharging decoupling capacitor $C_x$, a novel switching sequence is also proposed. The proposed topology is verified by design analysis, simulation and experimental results.

• International Journal of Computer Science & Network Security
• /
• v.24 no.7
• /
• pp.31-44
• /
• 2024

The inverted index is combination of the keywords and posting lists associated for indexing of document. In modern age excessive use of technology has increased data volume at a very high rate. Big data is great concern of researchers. An efficient Document indexing in big data has become a major challenge for researchers. All organizations and web engines have limited number of resources such as space and storage which is very crucial in term of data management of information retrieval system. Information retrieval system need to very efficient. Inverted indexing technique is introduced in this research to minimize the delay in retrieval of data in information retrieval system. Inverted index is illustrated and then its issues are discussed and resolve by implementing the scalable inverted index. Then existing algorithm of inverted compared with the naïve inverted index. The Interval list of inverted indexes stores on primary storage except of auxiliary memory. In this research an efficient architecture of information retrieval system is proposed particularly for unstructured data which don't have a predefined structure format and data volume.

• The Korean Journal of Applied Statistics
• /
• v.34 no.3
• /
• pp.427-438
• /
• 2021

Two-stage sampling allows us to estimate population characteristics by both unit and cluster level together. Given a complex auxiliary information, integrated calibration weighting would better reflect the level-wise characteristics as well as multivariate characteristics between levels. This paper explored the integrated calibration weighting methods by Estevao and Särndal (2006) and Kim (2019) through a simulation study, where the efficiency of those weighting methods was compared using an artificial population data. Two weighting methods among others are shown efficient: single step calibration at the unit level with stacked individualized auxiliary information and iterative integrated calibration at each level. Under both methods, cluster calibrated weights are defined as the average of the calibrated weights of the unit(s) within cluster. Both were very good in terms of the goodness-of-fit of estimating the population totals of mutual auxiliary information between clusters and units, and showed small relative bias and relative mean square root errors for estimating the population totals of survey variables that are not included in calibration adjustments.