• Journal of Power Electronics
• /
• 제7권3호
• /
• pp.246-256
• /
• 2007

In this paper, a novel type auxiliary active edge resonant snubber assisted zero current soft switching pulse modulation Single-Ended Push Pull (SEPP) series load resonant inverter using IGBT power modules is proposed for cost effective consumer high-frequency induction heating (IH) appliances. Its operating principle in steady state is described by using each switching mode's equivalent operating circuits. The new multi resonant high-frequency inverter with series load resonance and edge resonance can regulate its high frequency output power under a condition of a constant frequency zero current soft switching (ZCS) commutation principle on the basis of the asymmetrical pulse width modulation (PWM) control scheme. Brand-new consumer IH products using the proposed ZCS-PWM series load resonant SEPP high-frequency inverter using IGBTs is evaluated and discussed as compared with conventional high-frequency inverters on the basis of experimental results. In order to extend ZCS operation ranges under a low power setting PWM as well as to improve efficiency, the high frequency pulse density modulation (PDM) strategy is demonstrated for high frequency multi-resonant inverters. Its practical effectiveness is substantially proved from an application point of view.

• KIEE International Transaction on Electrical Machinery and Energy Conversion Systems
• /
• 제2B권3호
• /
• pp.115-124
• /
• 2002

This paper presents an active auxiliary edge-resonant DC link snubber with a ringing surge damper and a three-phase voltage source type zero voltage soft-switching inverter with the resonat snubber treated here for the AC servo motor driver applications. The operation of the active auxiliary edge-resonant DC link snubber circuit with PWM voltage is described, together with the practical design method to select its circuit parameters. The three-phase voltage source type soft-switching inverter with a single edge-resonant DC link snubber treated here is evaluated and discussed for the small-scale permanent magnet (PM) type-AC servo motor driver from an experimental point of view. In addition to these, the AC motor stator current and its motor speed response for the proposed three-phase soft-switching inverter employing Intelligent Power Module(IPM) based on IGBTS are compared with those of the conventional three-phase hard-switching inverter using IPM. The practical effectiveness of the three-phase soft-switching inverter-fed permanent magnet type AC motor speed tracking servo driver is proven on the basis of the common mode current in a novel type three-phase soft-switching inverter-fed AC motor side and the conductive noise on the mains terminal interface voltage as compared with those of the conventional three-phase hard-switching inverter-fed permanent magnet type AC servo motor driver for the speed tracking applications.

• 해양환경안전학회지
• /
• 제27권6호
• /
• pp.883-889
• /
• 2021

대한민국의 낚시산업은 레저활동을 즐기는 인구 증가로 인해 매년 급성장하고 있으며 이에따라 규모가 큰 9-10톤급 낚시어선의 수는 매년 늘어나고 있다. 현재 운항 중인 낚시어선은 낚시 활동 중 유류비 절감과 엔진 발생 소음 저감을 위해 엔진을 정지하고 배터리를 이용하여 선박의 필수장비를 운영하고 있다. 하지만 배터리의 방전으로 인한 엔진 시동불량 등으로 인해 해상에서 표류되는 사고가 매년 꾸준히 발생하고 있으며, 이는 대형 인명사고로 이어질 수 있다. 본 연구에서는 낚시어선의 안전확보를 위해 태양광 보조전원 설치를 제안하고, 9-10톤급 선박을 대상으로 선정하였다. 대상선박의 태양광 발전설비 공간 확보 가능성을 확인하였으며, 태양광 발전설비의 적용을 검증하기 위해 조업 중 필요한 필수 부하량을 계산하고 전력분석프로그램을 통해 태양광 발전시스템을 모델링하였다. 모델링 된 태양광 발전시스템에 우리나라의 월별 수평면 평균 일사량을 적용하여 낚시어선의 태양광 보조발전장치 적용에 관한 타당성을 입증하였다.

• Nuclear Engineering and Technology
• /
• 제52권2호
• /
• pp.381-396
• /
• 2020

Investigations of the commercial aircraft impact effect on nuclear island infrastructures have been drawing extensive attention, and this paper aims to perform the safety assessment of Generation III nuclear power plant (NPP) buildings subjected to typical commercial aircrafts crash. At present Part I, finite element (FE) models establishment and validations for both the aircrafts and NPP buildings are performed. (i) Airbus A320 and A380 aircrafts are selected as the representative medium and large commercial aircrafts, and the corresponding fine FE models including the skin, beam, fuel and etc. are established. By comparing the numerically derived impact force time-histories with the existing published literatures, the rationality of aircrafts models is verified. (ii) Fine FE model of the Chinese Zhejiang Sanao NPP buildings is established, including the detailed structures and reinforcing arrangement of both the containment and auxiliary buildings. (iii) By numerically reproducing the existing 1/7.5 scaled aircraft model impact tests on steel plate reinforced concrete (SC) panels and assessing the impact process and velocity time-history of aircraft model, as well as the damage and the maximum deflection of SC panels, the applicability of the existing three concrete constitutive models (i.e., K&C, Winfrith and CSC) are evaluated and the superiority of Winfrith model for SC panels under deformable missile impact is verified. The present work can provide beneficial reference for the integral aircraft crash analyses and structural damage assessment in the following two parts of this paper.

• 한국화재소방학회논문지
• /
• 제32권1호
• /
• pp.57-65
• /
• 2018

본 연구에서는 다중오동작을 포함하고 있는 화재안전정지분석 교육자료를 개발하기 위하여 가상원전에서의 화재안전정지분석을 결정론적 화재분석코드를 사용하여 수행하였다. 교육용 가상원전은 원자로건물과 보조건물로 이루어졌고, 총 22개의 방화지역으로 구성되었다. 교육용 가상원전의 각 방화지역에는 밸브, 펌프, 비상디젤발전기, 스위치기어, 모터제어반, 로직컨트롤러 등의 기기가 배치되었다. 교육용 가상원전 기기들은 두 개의 케이블로 연결되었으며, 각 케이블은 케이블 트레이를 따라서 방화지역을 지나간다고 가정했다. 방화지역분석을 위해 교육용 가상원전에 대한 기기 및 케이블 정보를 데이터베이스화하였고, 다중오동작 시나리오, 기기로직 및 케이블로직을 가정하여 방화지역분석을 수행하였다. 방화지역 분석결과 문제가 되는 케이블과 케이블 트레이에 대해서 3시간 내화성능으로 케이블을 래핑하는 완화조치를 적용하였다.

• 한국지진공학회논문집
• /
• 제22권3호
• /
• pp.113-119
• /
• 2018

The probabilistic seismic safety assessment is one of the methodology to evaluate the seismic safety of the nuclear power plants. The site characteristics of the nuclear power plant should be reflected when evaluating the seismic safety of the nuclear power plant. The Korea seismic characteristics are strong in high frequency region and may be different from NRC Regulatory Guide 1.60, which is the design spectrum of nuclear power plants. In this study, seismic response of a nuclear power plant structure by Pohang earthquake (2017.11.15. (KST)) is investigated. The Pohang earthquake measured at the Cheongsong seismic observation station (CHS) is scaled to the peak ground acceleration (PGA) of 0.2 g and the seismic acceleration time history curve corresponding to the design spectrum is created. A nuclear power plant of the containment building and the auxiliary buildings are modeled using OPENSEES to analyze the seismic response of the Pohang earthquake. The seismic behavior of the nuclear power plant due to the Pohang earthquake is investigated. And the seismic performances of the equipment of a nuclear power plant are evaluated by the HCLPF. As a result, the seismic safety evaluation of nuclear power plants should be evaluated based on site-specific characteristics of nuclear power plants.

• 대한방사선기술학회지:방사선기술과학
• /
• 제15권1호
• /
• pp.79-87
• /
• 1992

It is a matter of common knowledge that madical radiation is most accented for of radiation is doses applied to the whole of people, and of them the radation dose by radiography diagnosis is mainly prevalent. In applying X-rays to a certain man for radiography diagnosis a radiologyist will have to have an absolute sense of mission concerning the reduction and prevention of the patient's radiation dose as the radiologyist obligation. Accordingly, the radiography conditions of the patient's chest employed 197 medical facilites were surveyed and skin dose was computated by the IPH Bit system and examined. As a result, it was shown that the average skin dose was $288\;{\mu}Sv$, its minimum value was $1600\;{\mu}Sv$, which was over 32 times its minimum value. This shows that the appropriate radiography method has not been applied at applying X-ray to the patient. It comes from the performance of X-ray equipment, the choice of auxiliary equipment materials etc. But the most important thing is to master the appropriate radiography condition, and therefore this point will have to be kept in mind.

• 항공우주기술
• /
• 제3권2호
• /
• pp.98-103
• /
• 2004

국내 최초로 개발 중인 소형위성발사체인 KSLV-I은 국내 우주발사체 연구개발의 기본 토대로서 개발의 성공여부가 국가우주개발중장기계획을 완수하는데 대단히 중요한 역할을 담당할 것이다. 현재 건설 중인 고흥 우주센터 발사장에는 발사체의 단별조립, 총 조립, 점검, 인증시험 및 발사 사전시험 등을 효율적으로 수행하기 위한 발사체 조립시설, 발사대, 추진제 공급시설, 발사통제시스템 및 부대시설 등의 지상장비를 개발하고 제작, 구축 후 운용할 예정이며 본 논문에서는 발사장 시스템 설계에 대해 제시하였다.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2009년도 춘계학술발표대회
• /
• pp.15.2-15.2
• /
• 2009

Manufacturing of printed electronics using printing technology has begun to get into the hot issue in many ways due to the low cost effectiveness to existing semi-conductor process. This technology with both low cost and high productivity, can be applied in the production of organic thin film transistor (OTFT), solar cell, radio frequency identification (RFID) tag, printed battery, E-paper, touch screen panel, black matrix for liquid crystal display (LCD), flexible display, and so forth. The emerging technology to manufacture the products in mass production is roll-to-roll printing technology which is a manufacturing method by printings of multi-layered patterns composed of semi-conductive, dielectric and conductive layers. In contrary to the conventional printing machines in which printing precision is about $50~100{\mu}m$, the printing machines for printed electronics should have a precision under $30{\mu}m$. In general, in order to implement printed electronics, narrow width and gap printing, register of multi-layer printing by several printing units, and printing accuracy of under $30{\mu}m$ are all required. We developed the roll-to-roll printing equipment used for printed electronics, which is composed of un-winder, re-winder, tension measurement system, feeding units, dancer systems, guide unit, printing unit, vision system, dryer units, and various auxiliary devices. The equipment is designed based on cantilever type in which all rollers except printing ones have cantilever types, which could give more accurate machine precision as well as convenience for changing rollers and observing the process.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제5권1호
• /
• pp.62-80
• /
• 2013

This paper has been focused on developing a new hybrid mount for shipboard equipment used in naval surface ships and submarines. While the hybrid mount studied in our previous research was 100 kg-class series-type mount, the new hybrid mount has been designed as an inertia-type mount capable of supporting a static of 500 kg. The proposed mount consists of a commercial rubber resilient mount, a piezostack actuator and an inertial mass. The piezostack actuator connected with the inertial mass generates actively the control force. The performances of the proposed mount with a newly designed specific controller have been evaluated in accordance with US military specifications and compared with the passive mount. An isolation system consisting of four proposed mounts and auxiliary devices has been also tested. Through a series of experimental tests, it has been confirmed that the proposed mount provides better performance than the US Navy's standard passive mounts.