• 무역상무연구
• /
• 제47권
• /
• pp.185-212
• /
• 2010

This study aims to derive practical suggestions to apply application methods by auxiliary costs, especially application of logistics and customs clearance areas in order to establish EPS support system of auxiliary cost occurred from export/import. For the propose, this study has analyzed types and situation of auxiliary costs, application method by auxiliary costs, payment situation of logistics auxiliary costs and clearance auxiliary costs and suggested the relevant problems and their application methods. Especially, in case of logistics auxiliary costs through connection to the attached general documents required for negotiation by reflecting characteristics of B2B transactions. In addition, it has suggested that those services by the said system should be conveniently used commonly by the export companies and logistics companies through provision of various payment measures, support of foreign currency payment, etc. and security of reliability/system stability, etc. for the compatible payment with other systems as the prerequisite for the successful settlement of the auxiliary costs EPS. It is expected that satisfaction of the uTradeHub users such as export/import companies and logistics companies will be increased, user-oriented customized information services such as raw cost prediction service through calculation of auxiliary costs could be available in the future and efficiency of work processes related to auxiliary costs will be increased, by providing the EPS through various single window based payment measures through establishment of the export/import auxiliary costs payment system.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1994년도 추계학술대회 논문집 학회본부
• /
• pp.24-26
• /
• 1994

This paper describes a numerical model for the short-term operation strategy of the cogeneration systems. Especially this paper considered various auxiliary equipments used for the effective operation of cogeneration system. Minimum daily operation costs of topping cycle are calculated by using LP. Simulation results of some cases are analyzed and compared each other. Through these simulations the validity of the proposed model considered various auxiliary equipments is verified.

• 한국시뮬레이션학회논문지
• /
• 제23권4호
• /
• pp.51-64
• /
• 2014

다품종 소량 생산을 따르는 중소기업들은 범용 장비와 이에 부착된 보조 장비를 활용하여 제품을 생산하고 있다. 이전에 많은 연구들은 이러한 중소기업의 환경에서 생산성 향상 관점의 설비 할당 연구를 진행해 왔다. 그러나 중소기업들은 제한된 예산 하에서 수요를 충족시켜야 하기 때문에 경제적 관점으로 설비와 작업을 할당하는 것이 매우 중요하다. 본 연구는 소모성 보조 장비의 잔존가치 개념을 이용하여 설비 할당 문제를 다루고자 한다. 소모성 보조 장비는 주 장비에 부착된 부품으로써 작업을 위해 꼭 필요한 부품이다. 그렇기 때문에 주 설비의 일정 작업시간 후에는 보조 장비의 구매가 이루어져야 한다. 본 연구에서는 PCB를 제조하는 S기업을 대상으로 잔존가치를 고려한 설비할당 방법과 S기업의 현행 설비할당 방법 (Cycle)이 장 단기 관점에서 보조 장비의 구매량과 구매비용에 어떤 영향을 미치는지 알아보기 위해 두 전략을 비교 실험하였다. 그 결과, 장 단기적 관점에서 모두 본 연구에서 제안하는 설비할당 방법이 현행방법보다 보조 장비의 구매수량 및 구매비용에 대해서 더 효율적인 결과를 보였다. 그러나 장기적으로 갈수록 현행방법과의 차이가 미미해짐을 알 수 있었다. 한편 유휴설비에 대한 대여 전략을 고려할 경우, 기업은 추가적인 이익 효과를 기대할 수 있음을 보였다.

• 한국정보통신학회논문지
• /
• 제17권9호
• /
• pp.2160-2166
• /
• 2013

해상용등명기는 IT기술의 적용과 LED 전구를 사용하여 활용성이 크게 향상되었다. 그러나 고장 등의 문제가 발생할 경우 즉시 해결이 어려우며, 유지보수에 추가적인 비용이 발생하고 있어 이를 해결하기 위한 대안이 요구되고 있다. 이와 관련하여 본 논문에서는 등명기의 주 광원과 예비광원을 일체형으로 설계하여 주 광원 고장 시 예비광원으로 운용이 가능한 이중기능 LED 등명기를 제안하였다.

• Journal of Electrical Engineering and Technology
• /
• 제13권6호
• /
• pp.2335-2343
• /
• 2018

This paper proposes an optimal damping control algorithm of the DTI (Direct Two-level Inverter) to miniaturize and reduce the weight of auxiliary power supply for railway vehicles. The conventional auxiliary power supply for railway vehicles uses a DC-DC converter to maintain the inverter input power from the line voltage smoothly. The proposed topology does not use a DC-DC converter for reducing of manufacturing and maintenance costs. It also proposes a DTI topology removed damping resistors that generate ground signal noise in a certain period. At this time, a resonance phenomenon of DC-link voltage occurs due to variation of the inductive load, and a method of controlling the resonance phenomenon of DC-link voltage is required. In order to suppress the resonance phenomenon of the DC-link voltage, at a point before resonance occurs, this paper introduces an algorithm to suppress the resonance phenomenon of DC-link voltage by compensating the resonance component of the q axis voltage of the synchronous reference frame. The proposed algorithm verifies the effect through simulation and experiment.

• 대한전기학회논문지:전력기술부문A
• /
• 제50권3호
• /
• pp.120-130
• /
• 2001

We present an approach to parallelizing optimal power flow that is suitable for distributed implementation and is applicable to very large interconnected power systems. This approach can be used by utilities to optimize economy interchange without disclosing details of their operating costs to competitors. Recently, it is becoming necessary to incorporate contingency constraints into the formulation, and more rapid updates of telemetered data and faster solution time are becoming important to better track changes in the system. This concern led to a research to develop an efficient algorithm for a distributed optimal power flow based on the Auxiliary Problem Principle and to study the convergence rate improvement of the distributed algorithm. The objective of this paper is to find a set of control parameters with which the Auxiliary Problem Principle (Algorithm - APP) can be best implemented in solving optimal power flow problems. We employed several IEEE Reliability Test Systems, and Korea Power System to demonstrate the alternative parameter sets.

• 설비공학논문집
• /
• 제24권9호
• /
• pp.657-662
• /
• 2012

The cogeneration system can operate at efficiencies greater than those achieved when heat and power are produced in separate. The optimal system can be determined by selecting the auxiliary system combined with cogeneration system. In the present study, economic investigation has been conducted with the cogeneration electric heat pump(EHP) system and the cogeneration absorption chiller(AC) system to install in a school dormitory. To analyze life cycle cost(LCC), cost items such as initial investment costs, annual energy costs and maintenance costs of each system have been considered. The initial investment cost is referred to the basis of estimated costs, and annual energy costs such as the electric power and gas consumption are based on the data in a school dormitory. LCC is evaluated with the present worth method. Considering investigated results, the initial investment cost of the cogeneration EHP system is more profitable about 24% than that of the cogeneration AC system. The energy cost of the cogeneration EHP system is more profitable about 8% than the cogeneration AC system. The LCC shows that the cogeneration EHP system is the most effective system in the school dormitory.

• 한국콘텐츠학회논문지
• /
• 제22권10호
• /
• pp.546-553
• /
• 2022

본 연구에서는 창원시 관내 도로 중 제강슬래그가 보조기층재로 사용된 도로에서 지속적인 포장면 크랙과 요철이 발생하여 물류운송의 불편 및 사고의 위험도가 증가하며 유지보수 예산 및 행정력 손실 등의 어려움이 있어 포장면 크랙 및 요철 발생 원인을 파악하고자 하였다. 3개 대상 도로에서 포장 절단 및 굴착을 실시하고 시료를 채취하여 수침 팽창시험과 X선 회절분석시험을 수행하였다. 제강슬래그의 주요 팽창원인은 CaO와 MgO의 수화반응 결과이며, CaO는 수개월 내에 수화반응이 종료되나 MgO는 소성되는 온도에 따라 반응 속도가 매우 느린 것으로 알려져 있다. X선 회절분석 시험 결과 3개 도로에서 채취된 시료의 MgO 함유량은 전체 평균 약 47%, CaO 함유량은 전체 평균 약 14%로 높은 MgO 함유량을 보였으며, MgO에 의한 느린 수화반응으로 인한 팽창이 장기적으로 도로 융기를 유발하고 그로인하여 도로 포장면에 크랙 및 요철이 발생된 것으로 판단된다.

• 한국생산제조학회지
• /
• 제24권2호
• /
• pp.155-159
• /
• 2015

Light emitting devices (LEDs) are widely used in the liquid crystal display (LCD) industry, especially for LCD back light units. Therefore, much research has been performed to minimize manufacturing costs. However, the current process does not process LED chips from broken substrates even though the substrate is expensive sapphire wafer. This is because the broken substrates lose their alignment marks. After pre-processing, LED dies are glued onto blue tape to continue post-processing. If auxiliary alignment marks are stamped on the blue tape, post-processing can be performed using some of the LED dies from broken substrates. In this paper, a novel stamper module that can stamp the alignment mark on the blue tape is proposed, designed, and fabricated. In testing, the stamper was reliable even after a few hundred stamps. The module can position the stamp and apply the pattern effectively. By using this module, the LED industry can reduce manufacturing costs.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2009년도 하계학술발표대회 논문집
• /
• pp.315-320
• /
• 2009

Thermoeconomics or exergoeconomics can be classified into the three fields of cost estimating, cost optimization, and internal cost analysis. The objective of cost estimating is to estimate each unit cost of product and allocate each cost flow of product such as electricity or hot water. The objective of optimization is to minimize the input costs of capital and energy resource or maximize the output costs of products under the given constraints. The objective of internal cost analysis is to find out the cost formation process and calculate the amount of cost flow at each state, each component, and overall system. In this study, a new thermoeconomic methodology was proposed in the three fields. The proposed methodology is very simple and obvious. That is, the equation is only each one, and there are no auxiliary equations. Any energy including enthalpy and exergy can be applied and evaluated by this equation. As a new field, the cost allocation methodology on cool air or hot air produced from an air-condition system was proposed. Extending this concept, the proposed methodology can be applied to any complex system.