• Journal of the Korean Society of Marine Environment & Safety
• /
• v.28 no.6
• /
• pp.1086-1091
• /
• 2022

The International Maritime Organization is establishing international agreements on maritime safety and security to prepare for the introduction of autonomous ships. In Korea, the industry is focusing on autonomous navigation system technology development, and to reduce accidents involving coastal ships, research on autonomous ship technology application plans for coastal ships is in progress. Interest in autonomously operated ships is increasing worldwide, and maritime demonstrations for verification of developed technologies are being pursued. In this study, a basic investigation was conducted on the design of a demonstration ship and an onshore platform (remote support center) using digital twin technology for application to coastal ships. To apply digital twin technology, an 8-m small battery-powered electric propulsion ship was selected as the target. The basic design of the twin-integrated platform was developed. The ship navigation and operation data were stored on a server system, and remote-control commands of the electric propulsion ship was achieved through communication between the ship and the onshore platform. Ship performance management, operation and operation optimization, and predictive control are possible using this digital twin technology. This safe and economical digital twin technology is applicable to ships responding to crisis scenarios.

• Journal of the Society of Naval Architects of Korea
• /
• v.59 no.6
• /
• pp.338-344
• /
• 2022

Roll moment usually is ignored when analyzing the maneuverability of surface ships. However, it is well known that the influence of roll moment on maneuverability is significant for ships with small metacentric height such as container ships, passenger ships, etc. In this study, a pure roll test is performed to determine the hydrodynamic derivatives with respect to roll motion as added mass and damping. The target ship is an autonomous surface ship designed to carry containers with a small drift and large freeboard. The commercial code of STAR CCM+ software is applied as a specialized tool in naval hydrodynamic based on RANS equation for simulating the pure roll of the ship. The numerical uncertainty analysis is conducted to verify the numerical accuracy. By distinguishing the in-phase and out-of-phase from hydrodynamic forces and moments due to roll motion, added mass derivatives and damping derivatives relative to roll angular velocity are obtained.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2022.11a
• /
• pp.263-264
• /
• 2022

전 세계적으로 자율운항선박 관련 연구가 활발히 수행되고 있으며, 자율운항선박 관련 개발 기술에 대한 시험평가 기술의 개발도 그 필요성이 부각되고 있다. 이와 같은 자율운항선박 관련 개발 기술에 대한 시험평가와 관련하여 현재 다부처사업으로 진행 중인 자율운항선박 기술개발사업에서는 자율운항선박에 탑재되는 장비 또는 알고리즘의 성능을 검증하기 위한 플랫폼으로 시뮬레이션 기반 테스트베드(Simulation-based testbed for autonomous ship, S-TAS)를 개발하고 있다. 본 연구에서는 시뮬레이션 기반 테스트베드의 활용을 위하여 자율운항시스템 구성요소 중 안전운항시스템과 경제운항시스템을 검증하기 위한 시뮬레이션 기반 시나리오 운용기능을 설계하였으며, 향후 개발되는 자율운항시스템을 위한 시나리오 운용 기술의 개발 및 연구를 수행할 예정이다.

• Journal of Navigation and Port Research
• /
• v.43 no.6
• /
• pp.353-360
• /
• 2019

Technology-driven development of a new system makes it difficult for users and stakeholders to identify or intervene in the development process, resulting in systems with unnecessary functions and poor quality services. Applying the software architecture design process to the initial design of the navigation system platform of autonomous ships enables the development of a system that reflects the required functions and service quality of the stakeholders. The design, which includes all of the subsystems that make up an autonomous ship platform, is close to an enterprise architecture. Thus, we strived to design a navigation system platform suitable for the design range of the software architecture. This study analyzed the definition of functional requirements, and quality attributes by applying the software architecture design procedure. This study was conducted to identify the characteristics of the navigation system and platform needs, and the stakeholders were identified. To derive the functional requirements and constraints of the platform, a quality attributes workshop was held engaging stakeholders, and the results of the analysis of functional requirements and quality attributes were listed. Based on the results of this study, the architect can establish the evidence and technical solutions that are integral for the architecture development, and will facilitate the creation of quality attribute scenarios.

• Journal of the Society of Naval Architects of Korea
• /
• v.61 no.2
• /
• pp.106-114
• /
• 2024

In the 21st century, the rapid development of automation and artificial intelligence technologies is driving innovative changes in various industrial sectors. In the transportation industry, this is evident with the commercialization of autonomous vehicles. Moreover research into autonomous navigation technologies is actively underway in the aviation and maritime sectors. Consequently, for the practical implementation of autonomous ships, an effective collision avoidance algorithm has become a crucial element. Therefore, this study proposes a collision avoidance algorithm based on the Obstacle Zone by Target(OZT), which visually represents areas with a high likelihood of collisions with other ships or obstacles. The A-star algorithm was utilized to represent obstacles on a grid and assess collision risks. Subsequently, a collision avoidance algorithm was developed that performs fuzzy control based on calculated waypoints, allowing the vessel to return to its original course after avoiding the collision. Finally, the validity of the proposed algorithm was verified through collision avoidance simulations in various encounter scenarios.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2003.05a
• /
• pp.141-148
• /
• 2003

This paper presents a rotating ann test for assessment of an underwater hybrid navigation system for a semi-autonomous underwater vehicle. The navigation system consists of an inertial measurement unit (IMU), an ultra-short baseline (USBL) acoustic navigation sensor and a doppler velocity log (DVL) accompanying a magnetic compass. The errors of inertial measurement units increase with time due to the bias errors of gyros and accelerometers. A navigational system model is derived to include the error model of the USBL acoustic navigation sensor and the scale effect and bias errors of the DVL, of which the state equation composed of the navigation states and sensor parameters is 25 in the order. The conventional extended Kalman filter was used to propagate the error covariance, update the measurement errors and correct the state equation when the measurements are available. The rotating ann tests are conducted in the Ocean Engineering Basin of KRISO, KORDI to generate circular motion in laboratory, where the USBL system was absent in the basin. The hybrid underwater navigation system shows good tracking performance against the circular planar motion. Additionally this paper checked the effects of the sampling ratio of the navigation system and the possibility of the dead reckoning with the DVL and the magnetic compass to estimate the position of the vehicle.

• Journal of the Society of Naval Architects of Korea
• /
• v.61 no.3
• /
• pp.143-151
• /
• 2024

In this study, we present a mapping framework for 3D spatial reconstruction of digital twin model using navigation and perception sensors mounted on an Autonomous Surface Vehicle (ASV). For improving the level of realism of digital twin models, 3D spatial information should be reconstructed as a digitalized spatial model and integrated with the components and system models of the ASV. In particular, for the 3D spatial reconstruction, color and 3D point cloud data which acquired from a camera and a LiDAR sensors corresponding to the navigation information at the specific time are required to map without minimizing the noise. To ensure clear and accurate reconstruction of the acquired data in the proposed mapping framework, a image preprocessing was designed to enhance the brightness of low-light images, and a preprocessing for 3D point cloud data was included to filter out unnecessary data. Subsequently, a point matching process between consecutive 3D point cloud data was conducted using the Generalized Iterative Closest Point (G-ICP) approach, and the color information was mapped with the matched 3D point cloud data. The feasibility of the proposed mapping framework was validated through a field data set acquired from field experiments in a inland water environment, and its results were described.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2021.11a
• /
• pp.74-75
• /
• 2021

At the 104th IMO MSC, it was decided to make a code for the operation of MASS(Maritime Autonomous Surface Ship). In addition, the government announced a roadmap for preemptive regulatory innovation for autonomous ships and identified 31 related regulatory issues and suggested improvements to revitalize the autonomous ship industry. This study aims to analyze the ship turning left on the route as a study on how to operate the route system when operating MASS. We intend to derive the current congestion degree of the special area of Busan New Port through maritime traffic survey and use simulation to derive the congestion degree of the special area due to the size of ships and increase in traffic volume. We would like to propose an appropriate amount of traffic (the number of L-converted). It is believed that the research results can be used as basic data for route operation when operating not only current ships but also MASS.

• Journal of the Society of Naval Architects of Korea
• /
• v.59 no.4
• /
• pp.214-224
• /
• 2022

It is necessary to estimate manoeuvring characteristics of submerged bodies at the design stage in order to ensure the safe operations. In this study, added mass coefficients in the mathematical model of submerged bodies are estimated by captive model tests and numerical calculations. Two kinds of models, MARIN 'BB2'submarine model and AUV (Autonomous unmanned vehicle) model are utilized in the forced oscillation tests. Compared to BB2 submarine, AUV with cylindrical type hull form shows relatively small added masses in roll, pitch, and yaw directions. Next, numerical calculations based on potential theory are performed under the assumption that viscous effects on inertia forces are negligible. Added masses obtained by numerical calculations are in good agreements with forced oscillation test results. And if slow manoeuvres of submerged bodies are presumed, some of velocity coupled terms can be approximated by combinations of added mass coefficients.

• Journal of Ocean Engineering and Technology
• /
• v.37 no.3
• /
• pp.122-128
• /
• 2023

Autonomous berthing is a crucial technology for autonomous ships, requiring optimal trajectory planning to prevent collisions and minimize time and control efforts. This paper presents a two-phase, two-point boundary value problem (TPBVP) strategy for creating an optimal berthing trajectory for a twin-propeller, twin-rudder ship with autonomous berthing capabilities. The process is divided into two phases: the approach and the terminal. Tunnel thruster use is limited during the approach but fully employed during the terminal phase. This strategy permits concurrent optimization of the total trajectory duration, individual phase trajectories, and phase transition time. The efficacy of the proposed method is validated through two simulations. The first explores a scenario with phase transition, and the second generates a trajectory relying solely on the approach phase. The results affirm our algorithm's effectiveness in deciding transition necessity, identifying optimal transition timing, and optimizing the trajectory accordingly. The proposed two-phase TPBVP approach holds significant implications for advancements in autonomous ship navigation, enhancing safety and efficiency in berthing operations.