• Journal of the Korean Institute of Intelligent Systems
• /
• v.14 no.5
• /
• pp.610-616
• /
• 2004

In the research of biomechanical engineering, robotics and neurophysiology, to clarify the mechanism of human bipedal walking is of major interest. It serves as a basis of developing several applications such as rehabilitation tools and humanoid robots. Nevertheless, because of complexity of the neuronal system that interacts with the body dynamics system to make walking movements, much is left unknown about the details of locomotion mechanism. Researchers were looking for the optimal model of the neuronal system by trials and errors. In this paper, we applied Genetic Programming to induce the model of the nervous system automatically and showed its effectiveness by simulating a human bipedal walking with the obtained model.

• Advances in robotics research
• /
• v.1 no.1
• /
• pp.101-126
• /
• 2014

In this article we present modular neural control for a leg-wheel hybrid robot consisting of three legs with omnidirectional wheels. This neural control has four main modules having their functional origin in biological neural systems. A minimal recurrent control (MRC) module is for sensory signal processing and state memorization. Its outputs drive two front wheels while the rear wheel is controlled through a velocity regulating network (VRN) module. In parallel, a neural oscillator network module serves as a central pattern generator (CPG) controls leg movements for sidestepping. Stepping directions are achieved by a phase switching network (PSN) module. The combination of these modules generates various locomotion patterns and a reactive obstacle avoidance behavior. The behavior is driven by sensor inputs, to which additional neural preprocessing networks are applied. The complete neural circuitry is developed and tested using a physics simulation environment. This study verifies that the neural modules can serve a general purpose regardless of the robot's specific embodiment. We also believe that our neural modules can be important components for locomotion generation in other complex robotic systems or they can serve as useful modules for other module-based neural control applications.

• Journal of Institute of Control, Robotics and Systems
• /
• v.8 no.4
• /
• pp.345-350
• /
• 2002

In recent years, as changing the habit of eating, the pathology in the colon grows up annually. The colonoscopy is generalized, but if requires much time to acquire a dexterous skill to perform an operation and the procedure is painful to the patient. biomedical and robotic researchers are developing a locomotive colonoscope that can travel safe1y in colon. In this paper, we propose a new actuator and concept of semi-autonomous colonoscope. The micro robot comprises camera and LED for diagnosis, steer- ing system to pass through the loop, pneumatic actuator and bow-shaped flexible supporters to control a contact force and to pass over haustral folds in colon. For locomotion of semi-autonomous colonoscope, we suggest an actuator that is based on impact force between a cylinder and a piston. In order to validate the concept and the performance of the actuator, we carried out the simulation of moving characteristics and the preliminary experiments in rigid pipes and on the colon of pig.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.7C
• /
• pp.527-537
• /
• 2012

In this paper, we propose unmanned vehicle based tracking network (UVTN) architecture and algorithms which employ multiple autonomous unmanned ground vehicles (AUGV) to efficiently follow targets in a group. The goal of UVTN is to maximize the service coverage while tracking target nodes for monitoring or providing the network access. In order to achieve this goal, UVTN performs periodic expansion and contraction which results in optimized redistribution of AUGV's in the network. Also, enhanced algorithms such as fast contraction and longest first are also discussed to improve the performance of UVTN in terms of the average coverage ratio and traveled distance. Simulation results show that the proposed UVTN and enhanced algorithms can effectively track the moving target and provide the consistent coverage.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.2072-2077
• /
• 2003

Animal-like robots are serving an important role as a linkage between biology and engineering. So, in this paper, we aim to develop a biomimetic microrobot that mimics the locomotion mechanism of a gastropod. This microrobot has 3 DOF (x, y translation and rotation), and has small size, unlimited traveling range, high resolution and low cost. Its movement can be made using propagation wave that is generated by the controllable sinusoidal voltage source and piezoelectric effects. This soft motion that can be generated by propagation wave and piezoelectric mechanism would be useful for the motion on the slippery surface. So we modeled the propagation wave mechanism including piezoelectric effect and friction on the contact surface, and could know the velocity of the microrobot is dependent on the driving frequency, input voltage peak, propagation wavelength and surface friction coefficient. With these results we design the microrobot, and accomplish its fabrication and experimentation. The development of this microrobot shall be aimed to design an autonomous moving actuator like animal. Also it can be used from micromanipulation system technology to biology and medicine.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.951-956
• /
• 2005

Since a snake achieves various movements just by a slender body, the mechanism of it is very amazing Many researches have been focusing on a snake like robot and have done for it on the ground. However the meander motion of the snake not only can be done by ground creatures, but also can be done by a water creature such as a sea snake or an eel. Therefore, the purpose of our research is to develop an autonomous underwater robot like the sea snake. As an approach to this goal, we develop an experimental sea snake-like-robot for examining basic characteristics, including propulsion, a turning and other performance. Our developed robot is composed of the head and 4 bodies. Each body equips one servomotor, which is operated with pulse signal. In the head unit, 1- chip-microcomputer, which generates the servomotor control signal for realizing a snake motion and the battery, is equipped. Our robot is covered with a rubber film for the waterproof. Using our developed robot, characteristics of the snake-like-robot moved in water are examined.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.27 no.6
• /
• pp.954-959
• /
• 2003

Colonoscopy is an important medical procedure for the diagnosis of various diseases like cancers in the colon and rectum. But it requires a lot of time for a doctor to acquire dexterous skills necessary to perform successful colonoscopy. Moreover, to many patients, conventional colonoscopy simply takes too long time. Therefore, some studies on the development of autonomous and more convenient colonoscope are carried out. In this Paper, we Propose a functional colonoscope robot system that has a locomotive function with a hollow body, a steering system, and other basic functions of typical conventional colonoscope systems. The concept and each component of the functional colonoscope system are described in this paper. In order to evaluate the functional performance of the colonoscope robot, we carried out in -vitro and in-vivo tests.

• Proceedings of the KSME Conference
• /
• 2008.11a
• /
• pp.870-875
• /
• 2008

The main objective of this paper is to control a trajectory tracking of the fish-mimetic robot by CPG (Central Pattern Generator), which is biological approach. CPG is biological neural networks that generate rhythmic movements for locomotion of animals, such as walking, running, swimming and flying. Animals show marvelous ability of autonomous dynamic adaptation for an unsteady fluid dynamic environment or various environments. So, we propose the 3-DOF CPG controller to track the trajectory of the fish robot in plane motion. The conformity of the proposed control algorithm is validated by simulation for a fish robot model, which is made by a commercial dynamic package.

• Proceedings of the KOSOMBE Conference
• /
• v.1996 no.11
• /
• pp.95-98
• /
• 1996

In this paper, The vehicle's path construction method for motorized wheelchair's autonomous navigation in a building through analysis of a corridor image using vision system has been proposed and We detected lines of vertical axis through camera distortion parameter, which was measured by camera calibration in a corridor image. Then we got the feature points in the lines. We analyzed the distance of feature points and what is feature points. we reconstructed corridor image to vehicle's path.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.41.6-41
• /
• 2001

As autonomous mobile robot become more widely used in industry, the importance of navigation system is rising, But eh primary method of locomotion is with wheels, which cause man problems in controlling tracked mobile robots. In this paper, we discuss the used navigation control of tracked mobile robots with multiple sensors. The multiple sensors are composed of ultrasonic wave sensors and vision sensors. Vision sensors gauge distance using a laser and create visual images, to estimate robot position. The 80196 is used at close range and the vision board is used at long range. Data is managed in the main PC and management is distributed to ever sensor. The controller employs fuzzy logic.