• 설비공학논문집
• /
• 제27권7호
• /
• pp.380-394
• /
• 2015

This article reviews the papers published in the Korean Journal of Air-Conditioning and Refrigeration Engineering during 2014. It is intended to understand the status of current research in the areas of heating, cooling, ventilation, sanitation, and indoor environments of buildings and plant facilities. Conclusions are as follows. (1) The research works on the thermal and fluid engineering have been reviewed as groups of heat and mass transfer, cooling and heating, and air-conditioning, the flow inside building rooms, and smoke control on fire. Research issues dealing with duct and pipe were reduced, but flows inside building rooms, and smoke controls were newly added in thermal and fluid engineering research area. (2) Research works on heat transfer area have been reviewed in the categories of heat transfer characteristics, pool boiling and condensing heat transfer and industrial heat exchangers. Researches on heat transfer characteristics included the results for thermal contact resistance measurement of metal interface, a fan coil with an oval-type heat exchanger, fouling characteristics of plate heat exchangers, effect of rib pitch in a two wall divergent channel, semi-empirical analysis in vertical mesoscale tubes, an integrated drying machine, microscale surface wrinkles, brazed plate heat exchangers, numerical analysis in printed circuit heat exchanger. In the area of pool boiling and condensing, non-uniform air flow, PCM applied thermal storage wall system, a new wavy cylindrical shape capsule, and HFC32/HFC152a mixtures on enhanced tubes, were actively studied. In the area of industrial heat exchangers, researches on solar water storage tank, effective design on the inserting part of refrigerator door gasket, impact of different boundary conditions in generating g-function, various construction of SCW type ground heat exchanger and a heat pump for closed cooling water heat recovery were performed. (3) In the field of refrigeration, various studies were carried out in the categories of refrigeration cycle, alternative refrigeration and modelling and controls including energy recoveries from industrial boilers and vehicles, improvement of dehumidification systems, novel defrost systems, fault diagnosis and optimum controls for heat pump systems. It is particularly notable that a substantial number of studies were dedicated for the development of air-conditioning and power recovery systems for electric vehicles in this year. (4) In building mechanical system research fields, seventeen studies were reported for achieving effective design of the mechanical systems, and also for maximizing the energy efficiency of buildings. The topics of the studies included energy performance, HVAC system, ventilation, and renewable energies, piping in the buildings. Proposed designs, performance performance tests using numerical methods and experiments provide useful information and key data which can improve the energy efficiency of the buildings. (5) The field of architectural environment was mostly focused on indoor environment and building energy. The main researches of indoor environment were related to the evaluation of work noise in tunnel construction and the simulation and development of a light-shelf system. The subjects of building energy were worked on the energy saving of office building applied with window blind and phase change material(PCM), a method of existing building energy simulation using energy audit data, the estimation of thermal consumption unit of apartment building and its case studies, dynamic window performance, a writing method of energy consumption report and energy estimation of apartment building using district heating system. The remained studies were related to the improvement of architectural engineering education system for plant engineering industry, estimating cooling and heating degree days for variable base temperature, a prediction method of underground temperature, the comfort control algorithm of car air conditioner, the smoke control performance evaluation of high-rise building, evaluation of thermal energy systems of bio safety laboratory and a development of measuring device of solar heat gain coefficient of fenestration system.

• 설비공학논문집
• /
• 제25권6호
• /
• pp.346-361
• /
• 2013

This article reviews the papers published in the Korean Journal of Air-Conditioning and Refrigeration Engineering during 2012. It is intended to understand the status of current research in the areas of heating, cooling, ventilation, sanitation, and indoor environments of buildings and plant facilities. The conclusions are as follows : (1) The research works on thermal and fluid engineering have been reviewed as groups of fluid machinery, pipes and valves, fuel cells and power plants, ground-coupled heat pumps, and general heat and mass transfer systems. Research issues are mainly focused on new and renewable energy systems, such as fuel cells, ocean thermal energy conversion power plants, and ground-coupled heat pump systems. (2) Research works on the heat transfer area have been reviewed in the categories of heat transfer characteristics, pool boiling and condensing heat transfer, and industrial heat exchangers. Researches on heat transfer characteristics included the results for natural convection in a square enclosure with two hot circular cylinders, non-uniform grooved tube considering tube expansion, single-tube annular baffle system, broadcasting LED light with ion wind generator, mechanical property and microstructure of SA213 P92 boiler pipe steel, and flat plate using multiple tripping wires. In the area of pool boiling and condensing heat transfer, researches on the design of a micro-channel heat exchanger for a heat pump, numerical simulation of a heat pump evaporator considering the pressure drop in the distributor and capillary tubes, critical heat flux on a thermoexcel-E enhanced surface, and the performance of a fin-and-tube condenser with non-uniform air distribution and different tube types were actively carried out. In the area of industrial heat exchangers, researches on a plate heat exchanger type dehumidifier, fin-tube heat exchanger, an electric circuit transient analogy model in a vertical closed loop ground heat exchanger, heat transfer characteristics of a double skin window for plant factory, a regenerative heat exchanger depending on its porous structure, and various types of plate heat exchangers were performed. (3) In the field of refrigeration, various studies were executed to improve refrigeration system performance, and to evaluate the applicability of alternative refrigerants and new components. Various topics were presented in the area of refrigeration cycle. Research issues mainly focused on the enhancement of the system performance. In the alternative refrigerant area, studies on CO2, R32/R152a mixture, and R1234yf were performed. Studies on the design and performance analysis of various compressors and evaporator were executed. (4) In building mechanical system research fields, twenty-nine studies were conducted to achieve effective design of mechanical systems, and also to maximize the energy efficiency of buildings. The topics of the studies included heating and cooling, HVAC system, ventilation, renewable energy systems, and lighting systems in buildings. New designs and performance tests using numerical methods and experiments provide useful information and key data, which can improve the energy efficiency of buildings. (5) In the fields of the architectural environment, studies for various purposes, such as indoor environment, building energy, and renewable energy were performed. In particular, building energy-related researches and renewable energy systems have been mainly studied, reflecting interests in global climate change, and efforts to reduce building energy consumption by government and architectural specialists. In addition, many researches have been conducted regarding indoor environments.

• 설비공학논문집
• /
• 제29권6호
• /
• pp.327-340
• /
• 2017

This article reviews the papers published in the Korean Journal of Air-Conditioning and Refrigeration Engineering during 2016. It is intended to understand the status of current research in the areas of heating, cooling, ventilation, sanitation, and indoor environments of buildings and plant facilities. Conclusions are as follows. (1) The research works on the thermal and fluid engineering have been reviewed as groups of flow, heat and mass transfer, the reduction of pollutant exhaust gas, cooling and heating, the renewable energy system and the flow around buildings. CFD schemes were used more for all research areas. (2) Research works on heat transfer area have been reviewed in the categories of heat transfer characteristics, pool boiling and condensing heat transfer and industrial heat exchangers. Researches on heat transfer characteristics included the results of the long-term performance variation of the plate-type enthalpy exchange element made of paper, design optimization of an extruded-type cooling structure for reducing the weight of LED street lights, and hot plate welding of thermoplastic elastomer packing. In the area of pool boiling and condensing, the heat transfer characteristics of a finned-tube heat exchanger in a PCM (phase change material) thermal energy storage system, influence of flow boiling heat transfer on fouling phenomenon in nanofluids, and PCM at the simultaneous charging and discharging condition were studied. In the area of industrial heat exchangers, one-dimensional flow network model and porous-media model, and R245fa in a plate-shell heat exchanger were studied. (3) Various studies were published in the categories of refrigeration cycle, alternative refrigeration/energy system, system control. In the refrigeration cycle category, subjects include mobile cold storage heat exchanger, compressor reliability, indirect refrigeration system with $CO_2$ as secondary fluid, heat pump for fuel-cell vehicle, heat recovery from hybrid drier and heat exchangers with two-port and flat tubes. In the alternative refrigeration/energy system category, subjects include membrane module for dehumidification refrigeration, desiccant-assisted low-temperature drying, regenerative evaporative cooler and ejector-assisted multi-stage evaporation. In the system control category, subjects include multi-refrigeration system control, emergency cooling of data center and variable-speed compressor control. (4) In building mechanical system research fields, fifteenth studies were reported for achieving effective design of the mechanical systems, and also for maximizing the energy efficiency of buildings. The topics of the studies included energy performance, HVAC system, ventilation, renewable energies, etc. Proposed designs, performance tests using numerical methods and experiments provide useful information and key data which could be help for improving the energy efficiency of the buildings. (5) The field of architectural environment was mostly focused on indoor environment and building energy. The main researches of indoor environment were related to the analyses of indoor thermal environments controlled by portable cooler, the effects of outdoor wind pressure in airflow at high-rise buildings, window air tightness related to the filling piece shapes, stack effect in core type's office building and the development of a movable drawer-type light shelf with adjustable depth of the reflector. The subjects of building energy were worked on the energy consumption analysis in office building, the prediction of exit air temperature of horizontal geothermal heat exchanger, LS-SVM based modeling of hot water supply load for district heating system, the energy saving effect of ERV system using night purge control method and the effect of strengthened insulation level to the building heating and cooling load.

• 전산구조공학
• /
• 제7권3호
• /
• pp.95-103
• /
• 1994

원자력발전소 부품중 안전과 관련된 구조물은 지진하중하에서 그 건전성을 유지하도록 설계되어야 한다. 그중 원자로내부구조물부품은 1차 내진분류에 속하는 것으로써 지진하중하에서의 건전성이 발전소 안전과 경제적인 관점에서 매우 중요하다. 지금까지 이러한 원자로내부구조물의 모델링에 대해서는 여러 사람들에 의해 연구되고 발표되었으나, 본 논문에서는 국내 발전소 중에서 Turn-jey base로 건설되어 이미 가동 중에 있는 영광 1&2호기의 원자로내부구조물에 대한 안전정지지진하의 거동을 Global Beam Model이라는 단순화된 모델을 이용하여 분석하였다. 이 모델의 설정을 위해서 주요부품들을 double pendulum의 보요소로 표현하였고, 이들 주요부품들의 특성해석을 범용유한 요소해석 코드인 ANSYS에 의해 구하여 이를 상부 및 하부에서 간격을 갖는 비선형 스프링으로 모델링하였다. 또한 이 비선형 스프링뿐만아니라 원자로용기와 원자로내부구조물부품들 사이의 유체동적현상을 묘사한 유체동력학적 coupling에 의해 pendulum의 보요소를 서로 연결시켜 모델링을 하였다. 가진자료인 안전정지하중은 영광 1&2호기의 원자로용기 지지부에 가해지는 응답스펙트럼을 시간이력함수로 바꾸었으며, 이 모델과 간진 하중을 가지고 비선형해석 code인 KWUSTOSS의 explicit Runge-Kutta-Gills algorithm을 이용하여 적분을 수행하므로써 안전정지지진하의 원자로 내부구조물에 대한 거동을 구하여 이 구조물의 주요부품에 대한 내진검증 및 구조물 내부에 있는 핵연료집합체의 내진 해석을 위한 입력자료를 확보할 수 있었다. 그리고 본 연구에서 사용된 Globa Beam Model의 간편성 및 효율성과 explicit Runge-Kutta-Gills algorithm에 대한 경제성을 확인할 수 있었다.파악되었 다. 그 외에도 '옥외공간이용 편리'(outdoor or recreation convenience)와 ' 이웃만족'(satisfaction with neighbors), 그리고 '주거환경 유형'(building type, building arrangement type)등도 유의한 인과적 관련을 보이므로써, 기존 문헌들이 제시하고 있는 것보다 훨씬 다양한 변수들이 다양한 경로를 통해 거주자 시각만족의 영향인자가 될 수 있는 가능성을 제시하고 있다. 가설 변수의 하나인 '길찾기의 난이 정도'(difficulty of way-finding)와 종 속변수간에 유의한 관련도가 나타나지 않은 이유로 길찾기 변수가 '시각만 족'보다는 거주자의 '안전만족'(safety)과 관련된 변수일 가능성도 아울러 지적되었다. 본 연구의 결과로부터, 주거 계획 및 설계분야 그리고 추후 관 련 연구 분야를 위한 여러 제안들이 제시되었다.에 관한 국가 규격은 국제 규격에서 저술한 바와 같이 특별히 규정된 것이 없고 VDE(Verband Deutscher Elektrotechniker: 서독전기기술 협회)와 SAE(Society of Automotive Engi- neers: 자동차 기술자 협회)에서 비교적 활발하고 Jaso(Japanese Automobile Standards Organization: 일본 자동차 표준협회)에서 많이 진행중에 있다. 본 고에서는 자동차의 전자제어에 따른 잡음 발생 요인과 전자파 간섭 관련 자동차 규격과 시험평가 방법에 대해 간단히 소개 하였다.저하에 저해요인으로서가 아니라, 인위적이던 자연적이던 간에 아들만 두면 단산하는 현행의 출산풍토하에서는 남아선호관이 오히려 출산력저하에 결정적으로 작용하고 있다고 하겠다. 태아의 성 판별을 통한 선택적 인공임신중절의 건수는 1990년 한해에

• 설비공학논문집
• /
• 제28권6호
• /
• pp.256-268
• /
• 2016

This article reviews the papers published in the Korean Journal of Air-Conditioning and Refrigeration Engineering during 2015. It is intended to understand the status of current research in the areas of heating, cooling, ventilation, sanitation, and indoor environments of buildings and plant facilities. Conclusions are as follows. (1) The research works on the thermal and fluid engineering were carried out in the areas of flow, heat and mass transfer, cooling and heating, and air-conditioning, the renewable energy system and the flow inside building rooms. Research issues dealing with air-conditioning machines and fire and exhausting smoke were reduced. CFD seems to be spreading to more research areas. (2) Research works on heat transfer area were carried out in the categories of heat transfer characteristics, pool boiling and condensing heat transfer and industrial heat exchangers. Researches on heat transfer characteristics included the economic analysis of GHG emission, micro channel heat exchanger, effect of rib angle on thermal performance, the airside performance of fin-and-tube heat exchangers, theoretical analysis of a rotary heat exchanger, heat exchanger in a cryogenic environment, the performance of a cross-flow-type, indirect evaporative cooler made of paper/plastic film. In the area of pool boiling and condensing, the bubble jet loop heat pipe was studied. In the area of industrial heat exchangers, researches were performed on fin-tube heat exchanger, KSTAR PFC and vacuum vessel at baking phase, the performance of small-sized dehumidification rotor, design of gas-injection port of an asymmetric scroll compressor, effect of slot discharge-angle change on exhaust efficiency of range hood system with air curtain. (3) In the field of refrigeration, various studies were carried in the categories of refrigeration cycle, alternative refrigeration/energy system, system control. In the refrigeration cycle category, a cold-climate heat pump system, $CO_2$ cascade systems, ejector cycles and a PCM-based continuous heating system were investigated. In the alternative refrigeration/energy system category, a polymer adsorption heat pump, an alcohol absorption heat pump and a desiccant-based hybrid refrigeration system were investigated. In the system control category, turbo-refrigerator capacity controls and an absorption chiller fault diagnostics were investigated. (4) In building mechanical system research fields, eighteen studies were reported for achieving effective design of the mechanical systems, and also for maximizing the energy efficiency of buildings. The topics of the studies included energy performance, HVAC system, ventilation, and renewable energies, piping in the buildings. Proposed designs, performance tests using numerical methods and experiments provide useful information and key data which can improve the energy efficiency of the buildings. (5) The field of architectural environment was mostly focused on indoor environment and building energy. The main researches of indoor environment were related to the user and location awareness technology applied dimming lighting control system, the lighting performance evaluation for light-shelves, the improvement evaluation of air quality through analysis of ventilation efficiency and the evaluation of airtightness of sliding and LS window systems. The subjects of building energy were worked on the energy saving estimation of existing buildings, the developing model to predict heating energy usage in domestic city area and the performance evaluation of cooling applied with economizer control. The studies were also performed related to the experimental measurement of weight variation and thermal conductivity in polyurethane foam, the development of flame spread prevention system for sandwich panels, the utilization of heat from waste-incineration facility in large-scale horticultural facilities.

• Journal of Preventive Medicine and Public Health
• /
• 제32권1호
• /
• pp.48-59
• /
• 1999

본 연구는 Rapid Upper Limb Assessment(RULA)를 이용하여 자동차 조립작 업에 대한 인간공학적 작업평가를 하고, 이 결과와 작업관련 상지 근골격계 질환의 자각증상율 및 작업특성 변수들의 연관성을 분석함으로써, RULA결과가 관련 신체부위의 통증이나 불편함으로 보고되는 근골격계 부하의 좋은 지표가 될 수 있는지, RULA평가체계를 이용하여 작업 위험도가 적합한지 여부를 평가할 수 있는가를 보고자 하였다. 자동차 제조업 작업자 314명을 대상으로 근골격계질환 자각증상설문과 RULA를 이용한 작업평가를 하였으며, 다음과 같은 결과를 얻었다. 1. NIOSH의 작업관련 근골격계 질환의 감시기준(surveillence criteria)에 따라 자각증상을 조사한 결과, 연구대상자 중 목 32.8%, 어깨 26.4%, 팔 10.5%, 손 29.3%, 허리 41.4%였으며, 한가지 이상 의 증상을 보이는 경우는 62.4%의 분포를 보였다. 2. 품질관리부에 비해 조립부서 작업자 틀이 전체 증상과 어깨, 허리, 팔 및 손부 위 증상에서 더 높은 유증상률을 보였다(p<0.05). 3. 부서별 RULA를 이용한 작업평가 결과, 서브/조립반과 의장반의 공정이 높은 위험점수를 보였다. 전체 조립부서에 대한 평가결과 적합한 작업은 3.02%였고, 62.8%가 부적합한 작업으로 작업전환이나 중재조치가 필요한 경우였다. 자각증상과 RULA를 이용한 작업평가 결과를 비교한 결과 RULA점수가 클수록 자각증상율이 높음을 보였다.(p<0.05) 4. RULA평가지표와 자각증상사이의 관련성을 보기 위하여, RULA지표와 기타 작업관련요인들을 독립변수로, 자각증상유무를 종속변수로 하여 다중 로지스틱 회귀분석을 실시하였다. 최종적으로 증상유무를 가장 잘 설명하는 회귀모형에 대한 분석결과는 다음과 같다. 모든 증상군에 대해서는 반복작업(OR 2.183), 진동공구 사용(OR 2.775)과 총 위험도 점수(OR 2.250); 목 부위 증상군에서는 상완의 자세점수(OR 1.786), 상완 및 손부 위의 총점수(OR 1.634) ; 어깨 증상군은 상지의 근사용(OR 3.076), 상완 및 손부 위의 총점수(OR 1.798); 어깨와 목 부위를 합한 증상군은 상완 및 손부위의 총점 수(OR 1.715)와 상지의 근사용 점수(OR 2.057); 팔 증상군에서는 상지의 근사용 점수(OR 10.662) ; 손 부위 증상군에 대해서는 손목의 자세/손목 비틀림 지표 (OR 2.068)와 상지의 근사용 점수(OR 2.215); 허리부위 증상군에서는 하지의 근사용 점수(OR 2.601)가 통계적으로 유의한 지표였다.(p<0.05) 이상의 결과에서 작업관련 상지근골격계 자각증상과 RULA 점수사이에는 연관성이 있음이 관찰되었다. 이는 RULA가 직업성 질환을 유발할 수 있는 근골격계 부하에 폭로된 작업자들을 평가하는, 일차적인 작업 위험도 평가도구(Screening tool)로서 쓰일 수 있음을 말해준다. 다만 향후 RULA 사용에 있어서 상지(upper limb)와 허리부위(back)의 평가를 구분하고, 기타 다른 작업관련 요인들에 대한 평가체계를 보완하는 것이 필요하다.