• Journal of the Semiconductor & Display Technology
• /
• v.7 no.2
• /
• pp.39-43
• /
• 2008

Productivity is one of the performance indices of the semiconductor equipment in manufacturing viewpoint. Among many ways tried and adopted for improvement of the productivity of the FAB equipment, variation of equipment configuration was considered and its effect on the throughput was analyzed. Parallel machine cycle charts that were generated based on the equipment log were used in the analysis. Efficiency of the equipment due to change of the structure and the probability of the usage in the manufacturing process were examined. The results showed that the modification of the control algorithm in the equipment and the redistribution of the process time for each process and transfer module along to the change in the structure enhance the throughput of the equipment.

• Industrial Engineering and Management Systems
• /
• v.10 no.4
• /
• pp.288-291
• /
• 2011

Recommendations for older driver-friendly automobile interior design have been determined by taking into account older people's physical and cognitive characteristics. Twenty three older people (aged from 54 to 78) and five younger people (from 20 to 29) performed several tasks in actual driving conditions, in which their reaction times and performance errors were recorded. Some design factors were found to be related to older drivers' visibility and controllability. Several design recommendations were proposed in terms of cluster color and font, display location, and HVAC control type. Proposed recommendations are expected to satisfy a wider range of older drivers as these will facilitate automobile interior designs which are fitter to older drivers' visual, cognitive, and manual capabilities.

• Journal of the Semiconductor & Display Technology
• /
• v.8 no.2
• /
• pp.15-21
• /
• 2009

Atmospheric pressure plasma equipment was successfully applied to the flip chip BGA manufacturing process to improve the uniformity of flux printing process. The problem was characterized as shrinkage of the printed flux layer due to insufficient surface energy of the flip chip BGA substrate. To improve the hydrophilic characteristics of the flip chip BGA substrate, remote DBD type atmospheric pressure plasma equipment was developed and adapted to the flux print process. The equipment enhanced the surface energy of the substrate to reasonable level and made the flux be distributed over the entire flip chip BGA substrate uniformly. This research was the first adaptation of the atmospheric pressure plasma equipment to the flip chip BGA manufacturing process and a lot of possible applications are supposed to be extended to other PCB manufacturing processes such as organic cleaning, etc.

• Journal of the Semiconductor & Display Technology
• /
• v.20 no.1
• /
• pp.88-93
• /
• 2021

The automotive industry is developing day by day. Among them, it is very important to prevent accidents while driving. However, despite the importance of developing automobile industry technology, accidents due to road defects increase every year, especially in the rainy season. To this end, we proposed a road defect detection system for road management by converging deep learning and raspberry pi, which show various possibilities. In this paper, we developed a system that visually displays through a map after analyzing the images captured by the Raspberry Pi and the route GPS. The deep learning model trained for this system achieved 96% accuracy. Through this system, it is expected to manage road defects efficiently at a low cost.

• Korean Journal of Optics and Photonics
• /
• v.10 no.2
• /
• pp.120-127
• /
• 1999

We discussed two main types-conformal and non-conformal (powered) - of holographic combiner. A theoretical model based on the Kogelnik's coupled wave theory was used to illustrate bandwidth and efficiency properties. Also we showed numerical values for the aberrations that are induced by a wavelength shift from construction to reconstruction and found optimum coordinates to reduce the chrolatic aberation of construction beams using aberration balancing techniques. The holographic combiner manufactured in conformal type with 60$^{\circ}$ incidence angle at 514.5 nm had narrow angular bandwidth (FWHM) of 4.1" and spectral bandwidth of 11.4 nm, while non-conformal one with 50$^{\circ}$, 30$^{\circ}$ incidence angle at 514.5 nm showed spectral and angular bandwidth of 10.7 nm and 5.5$^{\circ}$, respectively.vely.

• Proceedings of the KIEE Conference
• /
• 2015.07a
• /
• pp.940-941
• /
• 2015

LCD (liquid crystal display) industry is needed to goods of high reliability and is interested in products without harmful material. In this experiment, we made the LED backlight unit for Automotive-navigation. And for making this backlight unit we used to eight side emitting type white LEDs with 1W high power of the lumileds company. We could know that this backlight unit releases to 6500 nit in 14W power consumption and start up voltage time is under the15ms in the ambient temperature $-20^{\circ}C$.

• Korean Journal of Cognitive Science
• /
• v.11 no.1
• /
• pp.1-8
• /
• 2000

Most of the important visual information is presented to driver through the display panel that is related to the vehicle. If display panel is designed with the c consideration of driver's visibility, drivers can get broad visual field and visual I information related to vehicle promptly and exactly during driving situation. Therefore display panel has direct relationship with the driver's task performance and it can be considered as an important device that affects the driver-automotive interaction. Many r researches about shape, characteristic and color of display panel have been performed, but not sufficient in this country Nowadays most of vehicles has an analog type display. but its shape and arrangement a are various without any definite standards about position. Therefore. experiments using evaluation tool (VISVEC System) were conducted to inquire the driver's preference on the major objects arrangement of display panel (speedometer. tachometer. fuel meter. and t thermometer) and to ascertain the factors that have an effect on drivers according to the objects position of the display panel The experiment results showed that there was no correlation between the arrangement c characteristics preferred by subjects and the cognitive accuracy but the cognition of V visual information more easy when the each major object has its area.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.1
• /
• pp.1-7
• /
• 2014

A stretchable polymeric membrane shaped diffuser was used to homogenize the coherent laser beam. The developed RGB module was used to focus and defocus test by beam combiners. Average oscillation frequency was set at 180Hz~300Hz and it resulted in the best homogenization effect in visual range. The blue laser module turned out to be the worst case for the transmission and primary reason is believed to be the short length of irradiated laser beam. The developed system removed the speckling and the brightness was decreased by 10 ~ 20% for the RGB laser. Overall the brightness was decreased by 13% and homogenity with respect to the temporal axis was improved from 30fs to 110fs.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.950-955
• /
• 2004

In the manufacture of liquid crystal display devices, there is a strong demand for contactless glass plate handling devices that can manipulate a glass plate without contaminating or damaging it. To fulfill this requirement, an electrostatic transportation device for glass plates is proposed. This device can directly drive a glass plate and simultaneously provide contactless suspension by electrostatic forces. To accomplish these two functions, a feedback control strategy and the operational principle of an electrostatic induction motor are utilized. The stator possesses electrodes which exert electrostatic forces on the glass plate and are divided into a part responsible for suspension and one for transportation. To accomplish dynamic stability and a relatively fast suspension initiation time, the structure of the electrode for suspension possesses many boundaries over which potential differences are formed. In this paper, an electrode pattern suitable for the suspension of glass plates is described, followed by the structure of the transportation device and its operational principle. Experimental results show that the glass plate has been transported with a speed of approximately 25.6 mm/s while being suspended stably at a gap length of 0.3 mm.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.29 no.6
• /
• pp.550-556
• /
• 2009

In an application of a time reversal(TR) focusing of array transducer on a defect inside the test material, we employ a new time delay focusing technique based the TR process. In order to realize this idea, a multi-channel ultrasonic system is constructed capable of applying necessary time delays to each channel. The TR-based focusing procedure first measures the backscattered signals after firing one of the array elements. A phase slope method is then used to determine the time-of-flights of the backscattered signals received by all elements of the array. These time delays are used to adjust the time of excitation of the elements for transmission focusing on the defect. In addition to the TR focusing, the classical phased array focusing is also considered for comparison. Experimental results show that the TR-based time delay focusing produces much stronger backscattered signals than the phased array focusing, demonstrating the enhanced capability of the TR focusing.