• 자원리싸이클링
• /
• 제24권1호
• /
• pp.51-57
• /
• 2015

유리는 고대시대부터 현재에 이르기까지 지속적으로 사용되고 있으며, 최근에는 최첨단 기술이 추가된 스마트 유리산업이 성장하고 있다. 이러한 스마트 유리는 라이프 사이클이 기존 유리보다 빠르기 때문에 교체 주기에 발맞춰서 재활용을 위해 보다 근본적이고 핵심적인 기술 개발이 필요한 상황이다. 스마트 유리 중에서 재활용 기술 개발이 가장 시급한 분야는 자동차 분야이며 자동차 폐차 시에 폐기되는 스마트 유리의 양은 연간 약 23,000톤 이상인 것으로 보고되고 있다. 본 논문에서는 국내 자동차 유리의 현황을 살펴보고, 국내의 재활용 기술과 재활용 방안 등에 대해 소개하고자 한다.

• 자원리싸이클링
• /
• 제13권1호
• /
• pp.54-58
• /
• 2004

Wollastonite-type glass ceramics were prepared by milling and firing at various temperatures using an automobile waste glass and waste shell as starting materials. Powder mixture ground by disk-type ball mill for 3 hours was pressed into a disk. The pressed specimen was fired at $850^{\circ}C$,$950^{\circ}C$ and $1050^{\circ}C$ for 1 hour in air. From FE-SEM observation, with an increase of the firing temperature from $850^{\circ}C$ to $1050^{\circ}C$, whisker-type phase was grown to about 10 $\mu\textrm{m}$ in length. Specimen fired at $1050^{\circ}C$ showed the formation of well-crystallized whisker-type wollastonite grains and the highest compressive strength.

• 오토저널
• /
• 제16권2호
• /
• pp.33-44
• /
• 1994

• Journal of Welding and Joining
• /
• 제33권2호
• /
• pp.78-84
• /
• 2015

Self-piercing rivet(SPR) is mechanical joining methods and which can be joining dissimilar materials. Unlike conventional riveting, SPR also needs no pre-drilled holes. During plastically deformation, SPR pierces upper sheet and joins it to under sheet. SPR has been mainly applied to the joining the automobile body and some materials, such as glass fiber reinforced polymer and aluminum alloy, which represent the sheet-formed materials for lightweight automobile. Glass fiber reinforced plastic(GFRP) has been considered as a partial application of the automobile body which is lighter than steels and stronger than aluminium alloys. It is needed SPR to join Al alloy sheets and GFRP ones. In this paper, in order to design the rivet and anvil, which are suitable for GFRP, the joinability was examined through simulations of SPR joining between GFRP and Al alloy sheets. For this study, AutoCAD was used for the modeling and the simulated using commercial FEM code DEFORM-2D. The simulated results for SPR process joining between GFRP and Al alloys were confirmed by the same conditions as experimental trials.

• 전자공학회논문지D
• /
• 제35D권5호
• /
• pp.18-23
• /
• 1998

Development of an automobile antenna printed on-glass for FM radio receptions was discussed in this study. NEC-2 code was used as the design tool in this research. An omnidirectional radiation pattern and reception power level of the newly designed antenna were compared with those of the conventional pole antenna for the evaluation of its performance. The test sites for the reception power level measurement were chosen by their signal enbironmental condition, such as multipath fading, and strong field effect area.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2005년도 추계 학술대회논문집
• /
• pp.75-80
• /
• 2005

The present work was undertaken to numerically analyze the defrosting phenomena of windshield glass. In order to analysis the phase change from frost to water on windshield glass by discharging hot air from a defroster nozzle, the flow and the temperature field of the cabin interior, the heat transfer through the windshield glass, and the phase change of frost should be solve simultaneously. In the present work, the flow field was obtained by solving 3-D incompressible Navier-Stokes equations, and the temperature field was computed from the incompressible energy equation. The phase change process was solved by the enthalpy method. For the code validation, the temperature and the phase change of the driven cavity were calculated. The calculation showed a good agreement with other numerical results. Then, the present code was applied to the defrosting problem of a real automobile, and a good agreement with the experimental data was also obtained.

• 센서학회지
• /
• 제32권2호
• /
• pp.124-130
• /
• 2023

Implementing flexible production systems in domestic and foreign automotive design parts assembly has increased demand for automation and power reduction. Consequently, transition to a hybrid production method is observed where multiple vehicles are assembled in a single assembly line. Multiple robots, 3D vision sensors, mounting positions, and correction software have complex configurations in the automotive glass mounting system. Hence, automation is required owing to significant difficulty in the assembly process of automobile parts. This study presents a primer lighting and inspection algorithm that is robust to the assembly environment of real automotive design parts using high power 'ㄷ'-shaped LED inclined lighting. Furthermore, a 2D camera was developed in the primer coating inspection system-the core technology of the glass mounting system. A primer application demo line applicable to the actual automobile production line was established using the proposed high power lighting and algorithm. Furthermore, application inspection performance was verified using this demo system. Experimental results verified that the performance of the proposed system exceeded the level required to satisfy the automobile requirements.

• 전기학회논문지
• /
• 제61권5호
• /
• pp.763-769
• /
• 2012

For mist sensing, temperature-humidity sensor is attached on six positions of front glass and rearview mirror in automobile. Bottom-left side of front glass is the best position where mist is sensing. For mist removal, air conditioner is turned on intensity 1, 3 and is set the temperature at 17[$^{\circ}C$], 25[$^{\circ}C$]. And heater is turned on intensity 1, 3 and is set the temperature at 25[$^{\circ}C$], 32[$^{\circ}C$]. The best condition which mist is removed is temperature at 17[$^{\circ}C$] and intensity 3 of air conditioner mode. At this condition, total average value of humidity output voltage difference is 0.561[V]. Also, air conditioner mode is effective than heater mode for mist sensing and removal.

• International Journal of Automotive Technology
• /
• 제8권3호
• /
• pp.327-335
• /
• 2007

A new optimization scheme and some key techniques are proposed in the development of a vehicle glass drop design software system. The key issues of the design system are how to regenerate the glass surface and make the vehicle glass drop down along the glass channels. To resolve these issues, a parameterized model was created at first, in which the optimizing method and Knowledge Fusion techniques were adopted the optimized process was then written into the glass drop design system by coding with C language and UGS/Open Application Programme Interface functions etc. Therefore, the designer or engineer can simulate the process of glass dropping along the channels to assess the potential interference between glass and door accessory by using this software system. All of the testing results demonstrate the validity of the optimizing scheme, and the parametric design software effectively solves the key issues on development of the door accessory package.

• 한국전자파학회논문지
• /
• 제29권7호
• /
• pp.477-483
• /
• 2018

본 논문에서는 FM 방송대역(88~108 MHz)에서 동작하는 자동차 전면 글래스 상에 설계되는 투명 안테나를 제안한다. 투명 안테나는 전형적으로 차량 지붕에 설치된 샤크핀 안테나의 공간적 제한을 피하기 위해 차량 전면 글래스에 구현하였다. 전면 글래스에 설계되는 안테나는 낮은 수심감도와 다른 서비스대역의 안테나로부터의 방사간섭 문제를 합리적으로 해결할 수 있다. 전면 글래스는 고유한 closed-line 구조를 가지고 있으며, 이 구조로 인해 전면 글래스 외곽의 차체 표면으로 전류가 흐르게 되어 FM 방송대역 이전 부분에서 첫 공진점이 발생한다. Closed-line 구조를 이용한 표면 전류 길이 제어를 통해 첫 공진점이 FM 대역에서 동작하는 안테나를 설계하였다. 또한, RF 수동소자로 설계하기 적합한 투명전극 소자 마이크로 메탈메쉬 필름의 투명성을 통해 시각적 인식의 최소화 하였다. 측정된 안테나는 FM 대역에서 반사계수는 -6 dB 이하이며, average peak gain은 -0.9 dB이다. 본 연구를 통해 제안된 전면 글래스 투명안테나는 미래의 자동차 안테나 개발에 필요한 공간과 설계 자유에 대한 가능성을 보여주었다.