• 수산해양기술연구
• /
• 제38권4호
• /
• pp.265-270
• /
• 2002

증류수 및 수도수 중에서 방열기로 사용되는 알루미늄합금재의 온도 변화, 탈기에 의한 개로전위, 부식전류밀도에 관하여 연구한 결과 다음과 같은 결론을 얻었다. 1. 청수 중에서 개로전위는 온도가 높아짐에 따라 비전위화 되고, 또한 탈기 후의 개로전위는 탈기 전의 개로전위보다 비전위화 된다. 2. 증류수 중에서의 부식전류밀도는 수도수 중에서의 부식전류밀도보다 더 억제된다. 3. 탈기 후의 부식전류밀도는 탈기 전의 부식전류밀도보다 크게 억제된다

• 디지털융복합연구
• /
• 제14권4호
• /
• pp.379-385
• /
• 2016

최근 IT 기업들에서 미래 산업으로 자동차에 관한 관심이 지속적으로 증가 하고 있다. 구글, 애플, 삼성과 같은 IT전문 기업들이 자동차 산업에 뛰어 들어 커넥티드카 분야에 많은 연구를 집중 하고 있다. 이러한 시점에서 커넥티드카의 개념에 대해 알아 보고 현재 커넥티드카의 여러 방법 중 하나인 미리링크에 관해 알아 본다. 또한 이러한 커넥티드카의 과도기적인 시점에서 아이폰을 이용한 미러링크의 한 방법을 제안하고 이것을 이용한 커넥티드카의 활용방법에 대해 알아보는 것을 본 연구의 목적으로 한다. 이러한 제안은 현재 자동차를 구매한 많은 사람들이 추가 비용을 들이지 않고 앞으로 출시될 커넥티드카의 기능을 포함 하고 있는 자동차를 미리 경험 할 수 있는 기회가 될 것이며 사용하고 있는 스마트 폰을 통해 자동차를 커넥티드카로 만들 수 있는 경험을 하게 될 것이다.

• 산업경영시스템학회지
• /
• 제40권4호
• /
• pp.10-20
• /
• 2017

The proportion of software in the automotive industry is steadily increasing due to the rapid technological development of automobile E/E parts. Because the automotive E/E technology is now on the basis of intelligent automobile and advanced safety automobile technology. The purpose of this study is to investigate the effect of organizational capability (organizational resource capability and management capability), process capability (process capability, customer Requirement management capability), performance dimension (motivation, participation level). In this study, we conducted questionnaires and statistical analysis on engineers (members of the Korea Advanced Automotive Technology Association) who perform research and development activities in the R&D organization of the automotive E/E part in South Korea. ANOVA is applied for the verification of the difference in performance measured by organizational capability, process maturity, and motivation participation level according to company characteristics (level of processing : supply chain configuration, annual sales, total SW development ratio). According to the results of this study, in order to improve the performance of ASPICE or ISO 26262-related consulting project, a different consulting approach strategy considering the characteristics of organization and personnel is needed. In summary, the analysis results for the three main treatment levels are as follows. The difference in organizational capacity, process capability and performance was found to be statistically significant according to supply chain configuration and annual sales, but it was found that the difference of response according to the proportion of total SW was not significant.

• 한국산학기술학회논문지
• /
• 제10권7호
• /
• pp.1473-1479
• /
• 2009

본 연구는 저비용 고효율의 일체형 곡물 건조/저장 시스템 개발을 위하여 추진되었다. 저장시스템의 용량과 규격, 배출기구의 설치 조건 및 공전, 자전 등의 운전 조건 그리고 대상 곡물의 비중 등의 다양한 조건에서 정해진 배출속도를 충족시키며 곡물의 선입-선출이 보장되는 균일하강 배출기구를 설계하고자 하였다. 곡물 배출 과정에 대한 육안 관찰이 가능한 장치를 제작하여 기존의 균일 단면형 배출기구에서의 곡물의 배출 거동을 관찰하여 기존 기구의 제한점을 검토하였다. 수학적 해석을 통해 주어진 배출 속도를 비롯한 다양한 조건과 곡물의 균일 하강의 조건을 만족시키는 가변 단면형 배출기구의 단면형상을 설계할 수 있는 일반화된 공식을 유도하였으며, 이를 적용하여 제작된 시작품의 운전을 통해 계산값과의 비교 검증의 연구 과정을 수행하였다. 이를 통해 주어진 다양한 조건을 만족하는 나선형의 가변 단면형 균일하강 배출기구의 단면 형상 설계를 위한 일반화된 수학적 모델을 개발하였다.

• 한국산업보건학회지
• /
• 제19권2호
• /
• pp.88-95
• /
• 2009

There are many assessment techniques used for occupational risk factors of MSDs in the workplaces. However, because all ergonomic assesment techniques or tools are based on theoretical background derived from workphysiology, biomechanics, psychophysics, industrial hygiene, work system, and etc, it is impossible to compare the assessment techniques. This study was conducted to compare the excess rates of risk factors among ergonomic assessment techniques and to make alternative methods. Site-visits to 6 automobile products and parts company provided data for process repeated work where the produced data was examined for evaluating the relationship between workplace lay-out and work posture by using ergonomic assessment techniques. We evaluated 157 jobs for simple repeated work and 37 jobs for manual materials handling (MMH). In simple repeated work, the exceeded rates of AC were 36.3% in OWAS method and 93.0% in RULA method. The exceeded rate for RULA method was significantly higher than those for OWAS method (p<0.05). In MMH, the exceeded rates of AC were 80.0% in NLE method and 76.5% in WAC method. Statistically significant differences were not identified in the exceeded rates for NLE and MAC methods (p<0.05). The analyzed results among ergonomic assessment techniques (OWAS, RULA, NLE/WAC) were applied to the same work places performing simple repeated work and manual materials handling simultaneously. The applied results showed statistically significant differences (p<0.05) among ergonomic assessment techniques (OWAS, RULA, NLE/WAC). Exceeded rates of four ergonomic assessment techniques in decreasing order was "RULA>NLE>WAC>OWAS". The RULA method was the strongest assessment technique for automobile products and parts company. We discovered that the results could easily be overestimated or underestimated when the ergonomic assessment techniques were not applied correctly during the evaluation process. Therefore, we recommend using at least 2 methods when evaluating and analysing the results.

• Journal of Korea Trade
• /
• 제23권6호
• /
• pp.1-13
• /
• 2019

Purpose - This study deals with a strategic plan for meeting the value added criteria effectively, which is one of the methods of determining origin used in preferential trade such as FTA. Automobile products, one of the major Korean export items, were selected to give a practical use against the FTA requirements. Design/methodology - This study is based on the value-added criteria of the Korea-US and Korea-EU FTAs that apply various value-added criteria. The Korea-US FTA adopts the RVC method based on the integration, deduction and net cost methods, while the MC method is employed in the Korea-EU FTA. The methodology used in this work is an extended literature review, analysis of the value-added criteria applied to automobile products under Korea-US and Korea-EU FTA with some secondary statistics. Findings - Based on in - depth analysis of the value - added criteria requirements for automobile products stipulated in the Korea - US FTA and the Korea - EU FTA, two strategic considerations are suggested. First is 'appropriate value-added strategy' and the second is 'strategy of changing production and trade structure'. The second strategy is a bit used in Korea but this is not considered best if the first strategy is ignored or forgotten. The second one is meaningful when this becomes inevitable. Research limitations/implications - This study is primarily designed to assist Korean auto mobile industry players exporting to EU and USA but this may help to auto part or material producers in FTA counter party territories being EU or USA as the preferential tariffs are applied on a inter region basis. A further research other than auto mobiles using other major FTAs might be followed later. Originality/value - There has been so far little research on strategic factors to meet the value-added origin requirements. This study, therefore, is expected to contribute facilitating the decision of FTA origin and to improve the utilization of FTA by allowing exporting companies using value added criterion to more smoothly meet origin requirements. This will also enable the tax authorities to utilize the value-added criterion to validate effectively the origin of imports where preferential tariffs are applied.

• 도시과학
• /
• 제11권2호
• /
• pp.45-54
• /
• 2022

Recently, regulations on automobile exhaust gas emission are being strengthened. Accordingly, automobile exhaust gas emissions are expected to decrease and continue to decrease. On the other hand, many countries do not yet consider the emission of non-exhaust air pollutants from automobiles as important. Automobile non-exhaust substances are classified into three categories: tire dust emissions, brake wear emissions, and road scattering dust. In particular, in the case of tire dust, research results exist that pollutant emissions increase as the weight of a vehicle increases. Since the weight of trucks varies according to the load and the load along the axles is also different, it can be expected that the emission of PM10 from the tire dust will be different depending on the loading method. Therefore, this study was conducted on the amount of PM10 generated in tire dust considering the axle load of the truck according to the loading method. However, it was confirmed that the total amount of PM10 was less than that all loads are loaded in the front or rear when the load was evenly distributed in the front and rear of the cargo compartment. In particular, if the load is distributed evenly in the front and back of the cargo compartment and the load in the front part is divided into 2 to 6 and loaded, as the number of divided loading increases the amount of PM10 generated decreases. And when the load is divided into 6 pieces, the total amount of PM10 generated is 0.3952g, the minimum value. If the load is divided into 6 or more and loaded evenly, the total PM10 generated continuously increases and converges to about 0.3964g.

• 한국자동차공학회논문집
• /
• 제19권1호
• /
• pp.38-44
• /
• 2011

Remanufacturing is restoring or manufacturing the worn-out or discarded components of an end of life product in order to bring it to the "like new" condition. The aim is to reprocess used products in such a manner that the quality of the products is as good as or better than the new one, in terms of appearance, reliability and performance. This paper investigates the automotive remanufacturing industry in Europe. To further knowledge in this field, the paper focuses on the remanufacturing of the automotive components of end-of-life vehicles. The paper scope emphasizes key remanufacturing companies, which are identified and were surveyed in terms of their business structures. The research aims to address the potential for growth within the remanufacturing industry, with regard to various players. The state of the art in remanufacturing of automotive equipment will be identified.

• 한국자동차공학회논문집
• /
• 제17권5호
• /
• pp.74-83
• /
• 2009

Recently, usage of electric and electronic system for car increases rapidly. Consequently power monitoring supplied to the system is essential for management and controlling. Generally, battery status is monitored through measuring and diagnosing the current measurement method utilizing Hall Effect. Therefore, in this paper, we analysed magnetic field to develop the solution of DC current sensor using Hall Effect which is the core of design and development. By analysing the magnetic field by FEM using Maxwell 3D software, the location of the highest output current and stable part in the Hall IC sensor was shown. Also, the optimal core design of DC current sensor using parametric and Simplex method was presented. A car battery charge and discharge process dependant on time effect on the changing of magnetic field was simulated and compared to the result from the experiment result of actual vehicle.

• 한국정밀공학회지
• /
• 제27권4호
• /
• pp.72-78
• /
• 2010

Textile machinery affects various industry, such as sport leisure industry, metal and chemistry material, electric electron, mechanical energy, packing and printing industry. In case of design of textile machine, the very important fact is absorbing the minute vibration induced by spinning thread and insert which is the part of spindle plays a role of reduction of impact caused by oscillation of thread bobbin. Therefore, Optimal design was executed by design of experiments and kriging optimal design methods to prevent fracture of spindle insert under the fatigue condition and deduced the best value of design parameter to improve the stability of the products. The highest sensitivity is showed at the design parameter A and D. As the spiral number of insert is increase, tension force applied its edge is distributed at whole model and the stress concentration is reduced.