• Transactions of the Korean hydrogen and new energy society
• /
• v.16 no.2
• /
• pp.199-207
• /
• 2005

Hydrogen is getting more attention owing to the seriousness of air pollution and dependance on oil import, UNCCC(United Nations Convention on Climate Change) for reducing the emission of $CO_2$. This fact is not confined in a certain country but global recognition and several countries initiated R&D competition for commercializing the hydrogen fuel cell vehicle. Within 20${\sim}$30 years cost effective hydrogen production can be possible using fossil fuels because so much research is carried out up to now. But it is so far to produce the most of the hydrogen using renewable resources considering the present status of R&D and cost effectiveness. Several automobile companies planed for mass production of hydrogen vehicle by 2010 but changed or canceled the plan owing to the difficulty of R&D and the low status of infrastructure penetration. This paper surveyed the hydrogen energy policy, R&D program and commercialization strategy of advanced country, international agency, automobile and energy company to analyze the global status of R&D and policy. And the survey of R&D program is focused on the part of hydrogen production, storage, delivery and fuel cell.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2000.04a
• /
• pp.157-163
• /
• 2000

The application as the parts of an automobile, using the property of GMT-Sheet, is increasing. In order to exchange the parts of an automobile for GMT-Sheet, at first, the establishment and joining problem of exact joining strength must be determined. We have studied it using composites which is not same each other fiber oriented condition so as to determine joining strength and joining condition of GMT-Sheet. In this study, the result of experiment of forming condition concerned joining problem of GMT-Sheet is this ; joining efficiency of GMT-Sheet, increases as lap joint length L increases. Increase of compression ration cause decrease of joining efficiency after of GMT-Sheet, joining. In the viewpoint of recycling, randomly oriented composite of GMT-Sheet is desirable more than unidirectional oriented composite. We have better design the structure so as not occur to stress centralization on the joining part.

• Journal of the Korean Society for Precision Engineering
• /
• v.27 no.3
• /
• pp.58-65
• /
• 2010

Remanufacturing is a process that restores old products to perform like new, while saving energy, reducing consumption of natural resources, and lowering environmental emissions. By extending the product life cycle, remanufacturing approaches enable closed loop material cycles that are ultimately necessary for a sustainable society. This paper provides some description of the current automotive remanufacturing enterprise, with a particular emphasis on key vehicle components that are currently remanufactured. The analysis yields two major conclusions. First, volume of the USA automotive after sales and remanufacturing industry market is estimated. Second, market price of a remanufactured component in the automotive sector is surprisingly uncorrelated with the number of companies engaged in remanufacturing that component - at least for companies registered with the Automotive Parts Remanufacturing Association (ARPA).

• Journal of Korea Multimedia Society
• /
• v.13 no.3
• /
• pp.392-399
• /
• 2010

The Automobile has developed and changed through the years from the invention and increased human-being's scope of activity. Junction Box, one of the part of automobile, is inspected by human eyes which caused mistakes and slow progress. To achieve the speed and accuracy the system was compensated by vision system which is inspecting automatically. This paper is automatic inspection of fuse and relay which is inserted in the junction box by checking the color and pattern of the cover. After checking the performance of the system by using the junction box, the result was 100 percent perception and open the possibility to inspect junction box fast and easy and accurate if it is applied to the industry.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.1 no.3
• /
• pp.83-94
• /
• 1993

Design and production of wiring for automobile systems provide the background for the development of concurrent engineering framwork. Key issues include with different parts of the wiring design process and the development of hierarchical representations that capture the different characteristics(e.g., connectivity, geometry) of the harnesses. The abstraction of design information results in features, while the abstraction of operations leads to the development of agents. These abstracts are essential for efficient transactions among people and computer tools in a domain that involves numerous interacting constraints. We have decomposed the wiring design process into four basic categories of tasks that are each addressed by an "agent" : the Environment Editor(EE), the Free Space Manager(FSM), the Wiring Editor(WE), and the Part Selector(PS). In this paper the strategy for the problem decomposition, the definition of features, and the ways in which features are used by various agents, are discussed. We conclude with a discussion of some of the issues raised by the project and the steps underway to address them.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.553-553
• /
• 2000

The application as the parts of an automobile, using the property of GMT-Sheet, is increasing. In order to exchange the parts of an automobile for GMT-Sheet, at first, the establishment and joining problem of exact joining strength must be determined. We have studied it using composites which is not same each other fiber oriented condition so as to determine joining strength and joining condition of GMT-Sheet. h this study, the result of experiment of forming condition concerned joining problem of GMT-Sheet is this ; joining efficiency of of GMT-Sheet, increases as lap joint length L increases. Increase of compression ratio causes decrease of joining efficiency after of GMT-Sheet joining. In the viewpoint of recycling, randomly oriented composite of GMT-Sheet is desirable more than unidirectional oriented composite. We has better design the structure so as not to occur to stress centralizatien on the joining part.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.13 no.2
• /
• pp.157-161
• /
• 2005

In the FY 2003, the number of registered vehicles in Korea reached 14 million, which is 7.7% increase from the previous year. The increase of number of vehicles has caused a lot of social problem with enormous costs. The social costs related to the vehicles includes environmental costs resulting from pollution and scraping of vehicles, those resulting from life-saving and repairing from car accidents and so on. There have been m any efforts to reduce the social costs in m any areas. As a part of the efforts, there are recent grow ing interests on the damageability & repairability in related industries. In this study, we investigated the cases of two different types of bum per stay. Futhermore, we analyzed their effects on damageability & repairability and reduction of repair cost. So we found that if the manufacturers design new cars with good damageability & repairability, then the total repair cost in crash will be reduced.

• Journal of the Korea Safety Management & Science
• /
• v.15 no.1
• /
• pp.193-198
• /
• 2013

Warehouse Management System was a helper of business in past, but it is perceived as a core competitive power and a tool for generating new business. It have been come out some new prospects for WMS due to generalization of global outsourcing and extension of the range of supply chain. In China, H automobile company construct the new WMS for providing the production extension and increment of part demand for A/S. This paper deals with the location management in warehouse, warehouse management, delivery management of goods from a warehouse, inventory management organizing WMS for construction of A/S warehouse in H motor in China. Then we identified the several problems of existing warehouse and constructed the driving organization and methods for overcoming these problems. We continually gather data for analysing the effects of new A/S warehouse and WMS construction.

• Journal of Ocean Engineering and Technology
• /
• v.15 no.2
• /
• pp.111-119
• /
• 2001

The application as the parts of an automobile, using the property of GMT-Sheet, is increasing. In order to exchange the parts of an automobile for GMT-Sheet, at first, the establishment and problem of exact joining strength must be determined. We have studied it using composites which is not same each other fiber oriented condition so as to determine joining strength and joining condition of GMT-Sheet. In this study, the result of experiment of forming condition concerned joining problem of GMT-Sheet is this; joining efficiency of GMT-Sheet, increases as lap joint length L increases. Increase of compression ratio causes decrease of joining efficiency after of GMT-Sheet joining. In the viewpoint of recycling, randomly oriented composite of GMT-Sheet is desirable more than unidirectional oriented composite. We has better design the structure so as not to occur to stress centralization on the joining part.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.14 no.3
• /
• pp.277-286
• /
• 2001

Among the ULSAB methods for the lightweight automobile body, Tailor Welded Blank(TWB) is adopted and the design process is developed for the existing component. Topology optimization conducted to find the distribution of the variable thickness. The number of parts and the welding lines are determined from it. In the detail design, size optimization is carried out to find the optimum thickness of each part and then, the final parting lines are tuned by shape optimization. A commercial optimization software GENESIS is utilized for the optimization processes.