• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2002년도 춘계학술대회 논문집
• /
• pp.357-362
• /
• 2002

Most of battery industries are growing explosively as a core strategy industry for the development of the semi-conductor, the LCD, and the mobile communication device. In this thesis, dynamic characteristics of the steel can labeling machine on the automatic cell assembly line are studied. Dynamic characteristic analysis consists of dynamic behavior analysis and finite element analysis and is necessary for effective design of machines. In the dynamic behavior analysis, the displacement, velocity, applied force and angular velocity of each components are simulated according to each part. In the FEA, stress analysis, mode analysis, and frequency analysis are performed for each part. The results of these simulations are used for the design specification investigation and compensation for optimal design of cell manufacturing line. Therefore, Virtual Engineering of the steel can labeling machine on the automatic cell assembly line systems are modeled and simulated. 3D motion behavior is visualized under real-operating condition on the computer window. Virtual Prototype make it possible to save time by identifying design problems early in development, cut cost by reducing making hardware prototype, and improve quality by quickly optimizing full-system performance. As the first step of CAE which integrates design, dynamic modeling using ADAMS and FEM analysis using NASTRAN are developed.

• 융합정보논문지
• /
• 제11권1호
• /
• pp.109-117
• /
• 2021

본 논문에서는 해양자동채염기의 구조중량 최소화를 위해 구조설계에 대한 메타모델 기반 근사최적화를 수행하였다. 구조해석은 해양자동채염기의 초기설계에 대한 강도성능을 평가하기 위해 유한요소법을 이용하여 수행하였다. 구조해석에서는 설계하중조건에 대한 강도성능을 평가하였다. 최적설계문제는 강도성능 제한조건을 만족하면서 중량을 최소화할 수 있는 구조두께의 설계변수를 결정하도록 정식화하였다. 근사최적화에는 반응표면법, 크리깅 모델 및 체비쇼프 직교 다항식의 메타모델을 사용하였다. 수치계산 특성을 검토하기 위해 근사최적화 결과는 비근사최적화 결과와 비교하였다. 근사최적화에 사용된 메타모델 중 체비쇼프 직교 다항식이 해양자동채염기의 구조설계에 가장 적합한 최적설계 결과를 나타내었다.

• 한국CDE학회논문집
• /
• 제11권3호
• /
• pp.157-163
• /
• 2006

Surfaces of many engineering structures, especially, those of ships are commonly made out of either single- or double-curved surfaces to meet functional requirements. The first step in the fabrication process of a three-dimensional design surface is unfolding or flattening the surface, otherwise known as planar development, so that manufacturers can determine the initial flat plate which is required to form the design shape. In this paper, an algorithm for optimal approximated development of a general curved surface, including both single- and double-curved surfaces, is established by minimizing the strain energy of deformation from its planar development to the design surface. The unfolding process is formulated into a constrained nonlinear programming problem, based on the deformation theory and finite element. Constraints are subjected to the characteristics of the fabrication method. And the design surface, or the curved shell plate is subdivided by automatic mesh generation.

• 한국공작기계학회논문집
• /
• 제11권1호
• /
• pp.91-96
• /
• 2002

Recently industry has moved towards automated operations with the goal of achieving better product quality greater productivity and reliability The pump design in characterized by extensive utilization of the related database which contains performance data. The inputs to the system are through interactive dialogue sessions and the basic input consist of flow rate, head, of fluid efficiency and the customer special requirements. These basic inputs along with the numerous rules in the knowledge bases and the mathematical modeling enable the effective design of the pump industry This paper represents the development of an automatic pump design system that was composed of a main program the data input module the drawing module the drawing edit module and was programed by the AutoLISP language under the Auto CAD program The developed system ultimately generates the design for a pump through the AutoCAD language.

• 대한기계학회논문집A
• /
• 제33권3호
• /
• pp.269-275
• /
• 2009

This paper represents a study on the conceptual design of new automatic bicycle transmission. The gear change in a commercial bicycle is carried out by moving the chain between sprockets. By the use of a multiple sprocket for speed change the power loss and transmission shock may occur. To solve the problem of bicycle transmission, the improved solution was derived by the technical contradiction matrix of TRIZ. The conceptual solution is one sprocket which replaces the function of multiple sprockets and adapts actively to the pitch of chain. And it was confirmed to be an adequate design through the Independence Axiom of design axiom.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 추계학술대회논문집A
• /
• pp.813-817
• /
• 2000

Cam mechanism is one of the common devices used in many automatic machinery. Specially cylindrical cam generates three dimensional motions. Thus, the shape design procedure must have high accuracy. This paper proposes the shape design procedure for a cylindrical cam and follower mechanism using a relative velocity method. The relative velocity method and coordinate transformation are used to find a contact point between cam and follower. Also, the full shape of the cylindrical cam can be generated by using the geometric relationships and the contact constraints. As a result, this paper presents an example for the sape design of the cylindrical cam in order to prove the accuracy of the design procedures.

• 한국CDE학회논문집
• /
• 제14권1호
• /
• pp.50-59
• /
• 2009

There are two main problems in the current PLC ladder programming practices: First, currently there are no widely adopted systematic design methods to deal with PLC based control systems in the shop floor. So, the control logic design phase is usually omitted in current PLC programming development life cycle. Second, PLC ladder logic provides only microscopic view of system processes. As a result, it is difficult for FA engineers to have overall perspectives about the interaction of system components intuitively during the verification step of logic errors. To solve these problems, this paper proposed object-oriented design and automatic generation method of PLC ladder logic. Based on the proposed method, the computer software to assist the automatic ladder logic generation is also developed.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1995년도 추계학술대회논문집
• /
• pp.7-15
• /
• 1995

An application-oriented approach to automatic pass schedule design in shape rolling was presented in this paper. The design approach and its related program are composed of several modules for input data, graphic display, data processing, calculation of design information, drawing of detailed pass shapes, database management and finite element analysis for design verification. The developed program was applied to automatic pass schedule design for a square-to-round bar shape rolling.

• 한국의류학회지
• /
• 제22권3호
• /
• pp.303-311
• /
• 1998

We developed a pattern drafting computer program using a popular CAD program for the purpose of the automatic manufacturing and education based on the concept of the easy -order-system which can easily reflect body characteristics and design favors of individuals to the ready-made clothing. The programs were written in Auto LISP which can utilise most of frictions of the Auto CAD, and the result of the design for an full-pleated skirt was shown. Also, we devised an easy way to set the location of reference points by inputting of tangential angle only for the use of the cubic spline curve which can represent body shape very well. Finally, by marking down all of symbols needed in manufacturing process, we completed the automatic pattern drafting program to make it useful as an industrial pattern without any amendment or correction in cutting and sewing operation.

• 한국시뮬레이션학회논문지
• /
• 제13권4호
• /
• pp.31-42
• /
• 2004

GDS (Grating automatic Drawing System), which is an automatic design system of a metal product called grating, is a system that produces various detailed drawings on the basis of information within a Plan Drawing that represents layout of the grating such as locations, shapes, directions, etc. However, automatically produced drawings by GDS do not fully satisfy the standard of the general dimension marking method used among the layout designers. The lack of this standard quality mainly results from the fact that overlapping among dimension markings appear frequently. To solve the overlapping problem we applied the rule-based expert system. The rules are designed based on the expertise of skilled layout designers within the grating production lines.