• Journal of Biosystems Engineering
• /
• 제3권2호
• /
• pp.22-33
• /
• 1978

To maintain the self-sufficiency of food production , it is required to improved the productivity and increase the effective utilization of land in the double cropping areas using improved cultivation technology. The following reasons encourage this cours of action because the overlapping rice harvest and barely seeding seasons complete for labour, the lower price of barley makes it financially less attractive to grow and these two facts together are responsible for a decrease in barley being planted in certain more seasonably marginal double cropping areas. Fro these reasons, it is desirable to carry out tests to improve the current cultivation techniques . In this interest , the following studies were carried out in the experimental field located at Banweol-myeon, Whasung-jkun, Gyeonggi-do from October 1977 to July 1978 in order to establish the mechanical method of barley cultivation using the power tiller. The summarized results are as follows. 1. The work performance in the seeding operation using the rotary barley seeder was 68 minutes per 10 ares which compares favourably with 408 min/10a using the conventional method. This is only one sixth of the time required by th conventional method. The operating costs using the rotary barley seeder was 1, 463 won per 10 areas as against 3, 486 Won per 10 ares for the conventional method, showing a saving of about 50% in comparison with the conventional method. 2. In the manure spreading operation, the work performance was 25 min/10a for the manure spreading machine , compared to 1089 min/10a for the manual operations. This is about one fourth of the time required by the conventional method, The operating costs were 810 Won/10a for the machine and 857 Won/10a for the manual labour. This cost shows little advantage by the machine over the manual labor costs. The conventional method of manure spreading will continue pending decision which will develope and improve the machine.3. Work performance in the rolling operation using the barley rolIer was 30 min/lOa which compares favourably with 135 min/10a using conventional method. This was one fourth of the time required by the conventional method. The operating costs were 514 Won/103. for the machine and 1, 003 Won/lOa for manual labour. In the weed control operation, the work performance and operating costs were 45min/lOa, 1, 399won/10a for the herbcide application using the power sprayer, 1, 149min/10a 8, 541won/lOa for the conventional method respectively. This is 26 times higher efficiency in comparison to the conventional method. 4. In the harvesting operation using the reaper binder and tiller attachment, the work performance was 60min/lOa and represents a cost of 2, 039won/10a. The con\ulcornerventional method took 640min/10a at a cost of 4, 757won/lOa. The reaper binder showns a saving of one tenth over the conventional method. The automatic thresher is already recommended for the current situations, and is now being used. 5. From a comparison of the results of the above trials, the serial cultivation system using the attachment for the power tiller such as the rotary barley seeder is now to be recommended for the current barley cultivation system. It is also recommend from these results that the mechanized technology now available must be used to improve and maintain the increase in barley production. It is seen th1t this is the only course now avaihble to solve the peak seasonal requirements of labour needed for l11rvesting and seeding between rice and barley cultivation.

• 설비공학논문집
• /
• 제21권12호
• /
• pp.715-732
• /
• 2009

This article reviews the papers published in the Korean Journal of Air-Conditioning and Refrigeration Engineering during 2008. It is intended to understand the status of current research in the areas of heating, cooling, ventilation, sanitation, and indoor environments of buildings and plant facilities. Conclusions are as follows. (1) Research trends in thermal and fluid engineering have been surveyed in the categories of general fluid flow, fluid machinery and piping, new and renewable energy, and fire. Well-developed CFD technologies were widely applied in developing facilities and their systems. New research topics include fire, fuel cell, and solar energy. Research was mainly focused on flow distribution and optimization in the fields of fluid machinery and piping. Topics related to the development of fans and compressors had been popular, but were no longer investigated widely. Research papers on micro heat exchangers using nanofluids and micro pumps were also not presented during this period. There were some studies on thermal reliability and performance in the fields of new and renewable energy. Numerical simulations of smoke ventilation and the spread of fire were the main topics in the field of fire. (2) Research works on heat transfer presented in 2008 have been reviewed in the categories of heat transfer characteristics, industrial heat exchangers, and ground heat exchangers. Research on heat transfer characteristics included thermal transport in cryogenic vessels, dish solar collectors, radiative thermal reflectors, variable conductance heat pipes, and flow condensation and evaporation of refrigerants. In the area of industrial heat exchangers, examined are research on micro-channel plate heat exchangers, liquid cooled cold plates, fin-tube heat exchangers, and frost behavior of heat exchanger fins. Measurements on ground thermal conductivity and on the thermal diffusion characteristics of ground heat exchangers were reported. (3) In the field of refrigeration, many studies were presented on simultaneous heating and cooling heat pump systems. Switching between various operation modes and optimizing the refrigerant charge were considered in this research. Studies of heat pump systems using unutilized energy sources such as sewage water and river water were reported. Evaporative cooling was studied both theoretically and experimentally as a potential alternative to the conventional methods. (4) Research papers on building facilities have been reviewed and divided into studies on heat and cold sources, air conditioning and air cleaning, ventilation, automatic control of heat sources with piping systems, and sound reduction in hydraulic turbine dynamo rooms. In particular, considered were efficient and effective uses of energy resulting in reduced environmental pollution and operating costs. (5) In the field of building environments, many studies focused on health and comfort. Ventilation. system performance was considered to be important in improving indoor air conditions. Due to high oil prices, various tests were planned to examine building energy consumption and to cut life cycle costs.

• 한국식품영양과학회지
• /
• 제34권7호
• /
• pp.973-979
• /
• 2005

한국에서 자생하는 흑송의 솔잎을 재료로 하여 항당뇨효능에 대한 생리 활성을 규명하고자 STZ로 당뇨를 유발시킨 흰쥐 에 솔잎증류액을 15일간 복강투여 후 체중, 혈당, OGTT, 혈액성분에 미치는 영향 및 간과 췌장의 조직병리학적 변화를 관찰하였다. 솔잎 투여군의 체중은 솔잎투여 6일째에 잠시 체중의 상승이 나타났을 뿐 그 이후에는 DM군에서와 같이 체중의 증가를 보이지 않았다. 공복혈당은 DM군에 비해 솔잎투여군에서 용량효과적으로 낮아지는 경향을 보였으며 15일째에 HP군에서 NC군의 수준으로 근접하였다. 구강내당능 검사결과 혈당곡선은 DM군에 비해 통계적 유의성은 없었으나 솔잎투여군에서 투여용량에 따라 감소경향을 보였다. 간기능관련지수로서 혈장내 total protein, albumin, AST는 솔잎투여에 따른 변화가 없었고, ALP와 ALT는 솔잎투여군 모두에서 DM군에 비해 감소하는 경향을 나타내었다. 신장기능 관련지수에서는 creatinine, uric acid, calcium, IP는 개선 경향이 관찰되지 않았으나, BUN에서는 DM과 비교시 솔잎투여군 모두에서 용량효과적으로 개선되는 경향을 보였다. 지질대사관련지수로서 total cholesterol, TG, HDL-C, LDL-C 농도는 모든 실험군간에 유의적인 차이를 보이지 않았다. 간 조직과 췌장조직 병리학적 관찰결과 간조직의 경우 DM군과 솔잎투여군의 일부에서 염증세포의 침윤이 부분적으로 관찰되었고 췌도세포에서는 DM군은 췌장실질의 괴사, 출혈성 병변, 지방세포의 괴사가 관찰되었으나 솔잎투여군 모두에서 DM군에 비해 억제되는 현상을 관찰할 수 있었다. 결론적으로 솔잎추출물 투여 에 의 괘 공복혈당이 낮아지고 당내성이 높아지는 경향을 보였고 간기능 지표 중 ALP와 ALT, 신장기능지표 중 BUN만이 솔잎 투여에 의한 개선효과를 나타내었으며, 혈중 지질 개선효과는 나타내지 않았다.

• 농촌의학ㆍ지역보건
• /
• 제29권2호
• /
• pp.303-314
• /
• 2004

본 연구대상의 작업특성을 조사한 결과 일년에 45회 정도 닭을 들여와 사육하였고, 양계업 종사년수는 최소 2년에서 최고 12년이었으며, 평균 종사 년수는 약 8년이었다. 닭을 사육하는 기간에는 일주일 내내 작업을 했고, 하루에 평균 6.3시간을 양계와 관련된 작업을 하며, 양계장 안에서 보내는 시간은 평균 3.3시간이었다. 14가지로 분류한 양계작업 중에서 닭의 입 출하와 분뇨처리는 외부인력과 함께 하거나, 외부인력에 맡기고 있었고, 이를 제외한 대부분의 일을 부부가 함께 하는 편이었다. 양계장의 사료 급여와 급수 시설은 자동시스템이었고, 환기창의 조절은 윈치커튼을 이용한 반자동 시스템이었다. 양계장의 환기는 겨울에는 강제환기를, 그 외 계절에는 자연환기 시스템을 사용하고 있었다. 계사의 바닥 재료는 왕겨를 사용하고 있었으며, 닭을 입하하기 전에 깔아서 출하한 다음에 제거하고 있었다. 양계장 내부애사 측정한 총 먼지와 호흡성 먼지의 지역시료 농도는 각각 평균 4.0mg/$m^3$(Range 3.16.8mg/$m^3$). 0.9mg/$m^3$(Range 0.41.8mg/$m^3$)였으며 호흡성 먼지의 개인노출량은 평균1.4mg/$m^3$(LOD미만 7.8mg/$m^3$)로 나타났다. 암모니아는 지역시료에서 평균 23.3ppm(Range 14.542.1ppm)이 측정되었고 개인노출량은 평균 22.2ppm(13.639.9ppm)으로 나타났다. 먼지의 지역시료 측정결과에서 총먼지에 대한 호흡성 먼지의 비율이 946%로 나타났고 호흡성 먼지 개인노출농도는 6개 농가 중 2개 농가의 개인노출량은 미국산업위생전문가협의회 (American Conference of Governmental Industrial Hygienist: ACGIH)의 노출기준치인3mg/$m^3$ 초과하였다(5.5mg/$m^3$, 7.8mg/$m^3$). 암모니아 개인노출농도 평균은 22.2ppm으로 ACGIH (시간가중)노출기준인 25ppm에 근접하였고, 34.2ppm, 39.9ppm 등 단시간노출기준(STEL) 35ppm과 비슷하거나 넘는 경우가 있어 매우 위험한 상황임을 알 수 있었다. 뿐만 아니라 양계장안에서 작업 중에 노출되는 먼지 또한 일반적인 호흡성먼지 보다 생물활성이 높은 유기먼지라는 점 등을 감안한다면 양계농업인의 건강영향은 매우 우려되는 바, 향후 의학적 검진이 병행되는 종합적인 조사가 필요할 것으로 판단된다.

• 한국식품과학회지
• /
• 제54권3호
• /
• pp.297-305
• /
• 2022

본 연구에서는 MU-C와 MU-CA에 대해 3T3-L1 세포를 이용하여 지방분화 억제 효과와 고지방식이를 통해 비만을 유도한 마우스에서 항비만 효과를 조사하였다. 3T3-L1 세포를 adipocyte로 분화 시키면서 무청 추출액을 세포에 처리한 후 Oil red O 염색법을 통하여 지방축적을 비교해 본 결과 Control 대비 MU-C와 MU-CA 처리군에서 세포 지방 축적이 현저히 감소 되었으며, MU-C 처리군이 MU-CA 처리군에 비해 유의적으로 억제되었음을 확인하였다. 6주간의 동물실험을 통한 무청 추출액 투여 후 체중 측정 결과 MU-C군과 MU-CA군 순으로 HFD군에 비해 체중 증가를 감소시키는 효과는 보였으며, 시료 투여 4주차부터 HFD군에 비해 시료 투여군에서 유의적으로 체중이 감소함을 확인하였다. 또한, MU-C군과 MU-CA군 순으로 HFD군에 비해 지방량이 적음을 확인할 수 있었다. 실험 종료 후 간 무게와 지방무게를 측정한 결과 절대 장기 무게와 상대 장기 무게 모두 MUC군과 MU-CA군 순으로 HFD군에 비해 유의적으로 무게가 감소하였다. 혈중 TG, TC 함량 측정 및 동맥경화지수와 심장위험도 지수 계산 결과 MU-C군과 MU-CA군 순으로 HFD군에 비해 유의적으로 감소 하였으며, 혈청 내 간 기능 효소(ALT, AST) 측정 결과 또한 MU-C군과 MU-CA군 순으로 HFD군에 비해 유의적으로 감소하였다. 병리조직학적 분석 결과 HFD군의 경우 지방축적 정도 심하였고, 일부에서 염증과 풍선도를 볼 수 있었다. MU-C군과 MU-CA군에서는 일부 간세포에 염증과 지방이 침착된 것을 확인하였으며, HFD군에 비해 간세포가 균일하게 배열되어 있고 지방 축적 정도는 감소된 모습을 관찰하였다. 지방세포의 경우도 대체적으로 균일한 크기에 지방세포를 가지고 있음이 관찰되었다. HFD군 비해 MU-C군과 MU-CA군 순으로 지방세포의 크기가 유의적으로 감소를 나타내었다. 이러한 실험 결과를 보았을 때 체중 변화, 지방무게, 혈중지질, ALT, AST 수치에서 열수 추출한 MU-C군이 MU-CA군에 비해 유의적으로 감소하여 MU-C군이 항비만 효과에 더 효과적인 물질로 확인된다. 이는 유기산 첨가 시 수용성 식이섬유와 불용성 식이섬유가 분리되어 수용성 식이섬유 보다 불용성 식이섬유의 함유량이 증가에 따른 성분 차이로 판단되며(Kim, 2011), 가수분해를 통한 생리활성 물질의 추출 수율 증가로 인해 MU-C군이 비만 예방 효과에 따른 건강기능식품 소재로 적극 활용될 수 있을 것으로 판단된다.

• 터널과지하공간
• /
• 제33권4호
• /
• pp.281-298
• /
• 2023

달 현지 탐사를 위해 무인 이동체에 대한 연구가 지속적으로 이루어져 있으며 달 지상 관심 지역의 정확한 위치 및 맵핑을 위한 실시간 정보화 작업이 요구되고 있다. 딥러닝 영상 처리 분석 기술을 실제 로버에 적용하기 위해 소프트웨어의 통합과 최적화에 대한 연구가 필요하며 본 연구에서는 가상의 달 기지 건설현장의 영상을 실시간 분석하여 핵심 객체의 공간 정보를 자동으로 수치화하는 방안에 대한 기초 연구가 진행되었다. 본 연구를 통해 이미 구축된 영역 분할 기반 객체 인식 알고리즘을 경계 상자 기반 객체 인식알고리즘으로 변경하여 객체 인식 정확도 및 추론 속도를 개선하는 작업이 이루어졌으며, 대용량 데이터 기반 객체 매칭 학습을 위해 Batch Hard Triplet Mining 기법을 도입하고, 학습 및 추론에 대한 최적화 연구가 수행되었다. 또한 개선된 객체 인식 및 동일 객체 매칭 소프트웨어를 통합하고, 입력 이미지 내 동일 객체 자동 매칭을 시각화하는 소프트웨어를 개발하였으며, 위성 모사 촬영 영상 내 객체를 학습 데이터로, 이동체 촬영 영상 내 객체를 추론 데이터로 사용하여 동일 객체 매칭의 학습 및 추론이 이루어졌다. 본 연구의 결과는 이동체의 연속 촬영 영상을 기반 3차원 공간 정보를 구현 및 관심 공간 내 객체 위치 설정에 활용할 수 있을 것으로 사료되며, 향후 달 기지 건설 현장에서의 영상 기반 시공 모니터링 및 제어를 위한 자동 현장 및 주요 대상물 공간 정보 구축 시스템과의 연계에 기여할 것으로 기대된다.

• 핵의학기술
• /
• 제14권2호
• /
• pp.77-82
• /
• 2010

PET/CT 기기의 설치가 증가함에 따라 PET/CT 검사 시감쇄 보정을 위한 CT 검사 역시 증가하여 검사 과정에서 피폭 선량이 증가 되고 있어 의료 피폭의 저감 대책을 포함한 방사선 안전 관리의 체계적인 구축이 필요하다. 본 연구에서는 PET/CT 검사에서의 환자 선량 데이터베이스를 구축하여 환자 선량 저감을 위한 초석을 세우기 위해 CT 선량 측정 프로그램을 사용하여 CT를 사용한 투과 스캔 시 환자가 받는 CT의 예측 유효 선량을 비교 분석하였다. BIO40, BIO16, DSTe8 에서 $^{18}F$-FDG PET/CT 검사를 시행한 180명을 대상으로 하였다. 각 기기 별로 남, 여 30명씩 선량의 평균을 분석하였다. 자동 노출 제어 시스템으로 선량 조절 시 가장 큰 영향을 줄 수 있는 환자의 체중 별로 50 kg미만, 50-60 kg 미만, 60 kg 이상 세 집단으로 나누어 선량의 평균을 분석하였다. CT-Expo v1.7과 ImPACT v1.0을 사용하여 선량 측정을 한 값을 비교 분석하고 체중과 유효 선량의 상관관계를 분석하였다. BIO40에서 검사한 환자의 유효 선량을 CT-Expo v1.7과 ImPACT v1.0을 사용하여 예측하였을 때, 남자 환자 30명은 각각 $6.46{\pm}1.18$ mSv, $6.54{\pm}1.21$ mSv, 여자 환자 30명은 각각 $6.29{\pm}0.97$ mSv, $5.87{\pm}1.09$ mSv 이었다. BIO16 에서 검사한 환자의 유효 선량은 남자 환자 30명은 각각 $9.36{\pm}1.96$ mSv, $8.36{\pm}1.69$ mSv 여자 환자 30명은 각각 $10.02{\pm}2.42$ mSv, $8.43{\pm}1.89$ mSv 이었다. DSTe8에서 검사한 환자의 유효 선량은 남자 환자 30명은 각각 $9.36{\pm}1.96$ mSv, $9.74{\pm}2.55$ mSv, 여자 환자 30명은 각각 $9.05{\pm}2.27$ mSv, $9.19{\pm}2.29$ mSv 이었다. 각 기기에서 검사를 시행한 환자의 체중에 따른 환자의 선량을 비교하기 위해, BIO40에서 검사를 시행한 환자를 대상으로 하여 50 kg 미만, 50~60 kg 미만, 60 kg 이상으로 체중별로 세 개의 집단으로 나누어 환자 선량을 측정하였다. CT-expo v1.7로 측정을 하였을 때 각각 $6.05{\pm}1.77$ mSv, $6.18{\pm}1.05$ mSv, $6.80{\pm}1.06$ mSv이었고 ImPACT v1.0으로 측정했을 때 각각 $5.06{\pm}1.46$ mSv, $5.72{\pm}0.86$ mSv, $6.42{\pm}0.96$ mSv이었다. BIO16에서 검사를 시행한 환자를 대상으로 하여 50 kg 미만, 50-60 kg 미만, 60 kg 이상으로 체중 별로 나누어 환자 선량을 측정하였다. CT-Expo v1.7로 측정을 하였을 때 각각 $7.74{\pm}0.66$ mSv, $8.58{\pm}0.93$ mSv, $10.88{\pm}1.32$ mSv이었고 ImPACT v1.0으로 측정했을 때 각각 $6.60{\pm}0.54$ mSv, $7.45{\pm}0.69$ mSv, $9.43{\pm}1.11$ mSv이었다. DSTe8에서 검사를 시행한 환자를 대상으로 하여 50 kg 미만, 50-60 kg 미만, 60kg 이상으로 체중 별로 나누어 환자 선량을 예측하였다. CT-Expo v1.7로 측정했을 때 각각 $5.03{\pm}0.95$ mSv, $8.25{\pm}1.66$ mSv, $10.33{\pm}1.68$ mSv 이었고 ImPACT v1.0으로 측정했을 때 각각 $5.20{\pm}1.01$ mSv, $8.51{\pm}1.53$ mSv, $10.9{\pm}1.87$ mSv이었다. 체중과 유효 선량의 상관관계를 분석하였을 때 CT-Expo v1.7과 ImPACT v1.0에서 Pearson 정률 상관계수가 각각 0.743, 0.692으로 매우 강한 양의 상관관계가 있었다. 피폭 선량의 예측이 필요할 경우 이와 같은 상용화된 선량 평가 프로그램을 사용하면 Phantom 연구를 시행하지 않더라도 유효 선량의 예측 및 평가가 가능하고, CT 선량 관리를 위한 기초 자료를 수집하는데 활용 될 수 있을 것으로 생각된다.

• Strategy21
• /
• 통권46호
• /
• pp.239-276
• /
• 2020

유엔 안전보장이사회(UNSC, United Nations Security Council) 주도의 경제제재는 초창기 '포괄적 경제제재(comprehensive sanctions)' 모델에서 '스마트 경제제재(smart sanctions)' 모델로 발전하고 있다. 유엔 안보리는 직접적인 무력개입(military intervention)보다 규범적 비용(normative costs)과 부담이 덜한 경제제재를 통해 대상 국가의 손익계산법(cost-benefit calculation)을 바꿔 행동변화를 이끌어내려고 했으나, '포괄적 경제제재'에 따른 비용 대부분이 일반 대중에게 전가되면서, 인도적 위기(humanitarian crisis) 사태를 초래하고, 대상 국가의 내부 결속력을 강화하는 역설적인 상황을 만들었다. 이에 따라 정책 결정 과정에 직접적으로 관여하는 지도자와 정치 엘리트를 대상으로 자산을 동결(asset freeze)하거나 여행금지(travel ban) 조치 등을 집중적으로 하는 '스마트 제재'가 탄생하였다. 대북한 경제제재 또한 '스마트 경제제재' 모델로 점차 발전하여 그 효과성을 나타내고 있다. 특히 최근의 결의안(resolutions)을 통해 석탄 수출을 전면 금지하고, 원유 수입을 제한함에 따라 지표상 가시적인 성과가 나타나고 있고, 2018년부터 한국, 미국과 평화협상에 나서면서 제재완화를 촉구하는 등, 위와 같은 '스마트' 대북제재가 북한의 행동변화를 이끌어내고 있음을 알 수 있다. 대북제재의 효과성은 북한의 대외무역규모(total trade volume) 변화량을 통해 측정할 수 있는데, '포괄적 경제제재'의 성격에 가까운 초기의 대북제재 결의안 채택 이후에는 북한 대외무역규모가 감소한 경우도 있지만 도리어 증대된 경우도 있었다. 그러나 석탄 수출 금지 및 원유 수입 제한 조치를 담은 2016, 2017년의 결의안 이후에는 북한 대외무역규모가 2016년 약 65억 달러에서 2017년 약 55억 달러로, 2018년에는 약 28억 달러로 대폭 감소한 사실을 발견할 수 있다. 북한의 대외무역은 정권의 자금줄과 같기 때문에 대외무역규모의 감소는 곧 '스마트 제재'의 효과와 같다. 대북경제제재의 효과성에 영향을 미치는 두 번째 조건은 중국의 대북제재 레짐(sanctions regime)에의 참여 여부다. 북한은 경제적으로 중국에 상당히 의존하고 있고, 이는 지표상으로도 명백히 나타나고 있다. 중국은 그 동안 북한의 지정학적인 가치 및 급변 사태 시 북-중 국경에서의 대규모 난민 발생 우려 등에 따라 직간접적으로 북한을 지지해왔지만, 북한 핵능력의 고도화에 따른 동북아시아 지역에서의 핵확산(nuclear proliferation) 우려, 미-중 무역분쟁에 따른 여파 등으로 대북제재 레짐에 성실히 참여할 것을 밝혔다. 실제로 중국의 대북한 석유 수출량이 감소하고, 북-중간 대외무역 총량 또한 2016년부터 지속적으로 감소하며, 대북경제제재에 중국의 참여가 제재 성공의 중요한 변수임을 증명했다. 효과적인 대북제재를 위한 마지막 요건은 북한의 경제제재 회피 노력 방지(prevention of North Korea's economic sanctions evasion efforts)다. 앞서 밝힌 바와 같이 석탄 수출과 원유 수입은 북한 정권의 자금줄이자 핵무력 고도화를 위한 필수 에너지원이다. 중국이 대북제재 레짐에의 참여를 선언한 상태에서 중국으로부터의 원유 수입량이 급감함에 따라 중동지역 등지로부터 바닷길을 통해 원유를 수입해야 하는데, 원유 수입량 제한에 따라 동중국해(East China Sea) 및 공해(high seas)상에서 선박 대 선박간 불법 환적(ship-to-ship illegal transshipment)을 실시하면서 대북제재를 무력화하고 있다. 유엔 대북제재위 산하 전문가 패널(Panel of Experts), 미 국무부(U.S. Department of State), 미 재무부 외부자산통제국(U.S. Department of the Treasury's Office of Foreign Assets Control, OFAC) 등은 보고서를 통해 북한의 해상 불법 환적 실태를 상세히 밝히고 있는데, 자동 선박 식별 장치(AIS, Automatic Identification System)의 허위 신호 송출(false signaling), 선박 등록 문서 위조(false certificate of registry)와 같은 방식으로 감시 및 단속을 회피하고 있는 실정이다. '스마트'한 대북제재 설계 및 중국의 참여로 대북제재가 북한의 행동 변화를 이끌어낼 수 있음이 확인되었지만, 국제사회의 눈을 피해 해상에서 만연하고 있는 불법 환적과 같은 행위는 효과적인 대북제재 실행의 마지막 퍼즐이라고 할 수 있다. 앞으로 해상에서의 불법 환적 행위를 막기 위해 다음 세 가지 정책적 함의를 도출해낼 수 있다. 첫 번째는 가장 강력한 조치라고 할 수 있는 해상봉쇄(maritime blockade)에 대한 고려다. 전세계 물동량의 40%가 지나가는 말라카 해협(Malacca Strait)은 북한에게도 중요한 해상 교통로이다. 북한이 계속해서 결의안을 위반하고 공해상에서 불법 환적 행위를 자행할 경우, 말라카 해협에서 북한과 연계된 의심 선박을 검문 검색하고 차단(interdiction)하여 강제적인 방식으로 북한의 제재 회피 노력을 근절할 수 있다. 남중국해(South China Sea)에서 중국과 미국 간, 중국과 주변국 간 갈등이 격화됨에 따라 다국적군의 말라카 해협 봉쇄는 중국에게 달갑지 않겠지만, 유엔 대북제재 결의안에 명시되어 있는 의심 선박에 대한 검문 검색 행위임을 명백히 함과 동시에 다자간의 협조를 바탕으로 하여 규범적 정당성(normative justification)을 높인다면 충분히 실현 가능한 방안이다. 두 번째는 공해상에서의 불법 해상 환적에 대한 감시 강화와 증거 수집이다. 마지막 세번째는 대한민국의 다국적 해상 감시 활동에의 참여다. 북한의 대북제재 이행 여부는 한국의 안보와 직결되는 사안이다. 대북제재의 최종 목표는 북한 비핵화에 있고, 협상 테이블에 북한을 이끌어내는 데 제재가 효과적이라는 것이 드러났기 때문에 핵 위협의 당사자인 대한민국 또한 효과적인 제재 이행 여부 감시에 책임감을 가져야 한다.

• 대한의용생체공학회:의공학회지
• /
• 제6권2호
• /
• pp.1-8
• /
• 1985

The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70$\pm$1.32mmHg/min)compared to CF dialyzers(4.32$\pm$0.55mmHg/min)(p<0.05). However, there was no observable difference in the UFR between the two dialyzers. Neither APD nor UFR showed any significant increase with an increasing number of reuses for up to more than 20reuses. A substantial number of failures observed in APD(larger than 20mmHe/min)on the reused dialyzers(2 out of 40 CP and S out 26 C-DAK) were attributed to the Possible damage on the fibers. The CF 15-11 HFDs which failed APD test did not show changes in the UFR compared to normal dialyzers indicating that APD is a more sensitive test than UFR test to evaluate the integrity of the fibers. 30527 T00401030527 ^x For quantitative measurement of reflected light from a clinical diagnostic strip, a prototype old reflectance photometer was designed. The strip loader and cassette were made to obtain more accurate reflectance parameters. The strip was illuminated at 45˚c through optical fiber and the intensity of reflected light was determined at rectanguLat angle using a photodiode. The kubelka-munk coefficient and reflection optical density were determined ar four different wavelengths(500, 550, 570 and 610nm) for blood glucose strip. For higher concentration than 300mg/41 about glucose, a saturation state of abforbance was observed at 500, 550 and 570nm. The correlation between glucose concentration and parameters was the best at 610nm. 30535 T00401030535 ^x Radiation-induced fibrosarcoma tumors were grown on the flanks of C3H mice. The mice were divided into two groups. One group was injected with Photofrin II, intravenously (2.5mg/kg body weight). The other group received no Photofrin II. Mice from both groups were irradialed for approximately 15 minutes at 100, 300, or 500 mW/cm2 with the argon (488nm/514.5 nm), dye(628nm) and gold vapor (pulsed 628 nm) laser light. A photosensitizer behaved as an added absorber. Under our experimental conditions, the presence of Photolfrin II increased surface temperature by at least 40% and the temperature rise due to 300 mW/cm2 irradiation exceeded values for hyperthermia. Light and temperature distributions with depth were estimated by a computer model. The model demonstrated the influence of wavelength on the thermal process and proved to be a valuable tool to investigate internal temperature rise. 30536 T00401030536 ^x We investigated the structural geometry of thirty-eight Korean femurs. The purpose of this study is to identify major geometrical differences between Korean femurs 3nd others that we believe belong to Caucasians so that we would be able to get insights into the femoral component design that fits Asians including Koreans. We utilized computerized tomography (CT) images of femurs extracted from cadavers. The CT images were transformed into bitmap data by using a film scanner, and then analyzed by using a commercially available software called Image v.1.0 and a Macintosh IIci computer.The resulting data were compared with already published data. The major results show that the geometry of the Korean femurs is significantly different from that of Caucasians: (1) the anteversion angle and the canal flare index are greater by the amount of approximately 8˚ and 0.5, respectively, (2) the shape of the isthmus cross section is more round, and (3) the distance between the teaser trochanter and the proximal border of the isthmus is shelter by about 15 mm. The results suggested that the femoral component suitable for Asians should be different from the currently-used components designed and manufactured mostly by European or American companies. 30537 T00401030537 ^x It is well known that nonlinear propagation characteristics of the wave in the tissue may give very useful information for the medical diagnoisis. In this paper, a new method to detect nonlinear propagation characteristics of the internal vibration in the tissue for the low frequency mechanical vibration by using bispectral analysis is proposed. In the method, low frequency vibration of f0( = 100Hz) is applied on the surface of the object, and the waveform of the internal vibration x (t) is measured from Doppler frequency modulation of silmultaneously transmitted probing ultrasonic waves. Then, the bispectra of the signal x (t) at the frequencies (f0, f0) and (f0, 2f0) are calculated to estimate the nonlinear propagation characteristics as their magnitude ratio, w here since bispectrum is free from the gaussian additive noise we can get the value with high S/N. Basic experimental system is constructed by using 3.0 MHz probing ultrasonic waves and the several experiments are carried out for some phantoms. Results show the superiority of the proposed method to the conventional method using power spectrum and also its usefulness for the tissue characterization. 30541 T00401030541 ^x This paper describes the implementation of a computerized radial pulse diagnosis by aids of a clinical expert. On this base, we composed of the radial pulse diagnosis system in korean traditional medicine. The system composed of a radial pulse wave detection system and a radial pulse diagnosis system. With a detection system, we detected Inyoung and Cheongu radial pulse wave and processed it. Then, we have got the characteristic parameters of radial pulse wave and also quantified that according to the method of Inyoung-Cheongu Comparison Radial Pulse Diagnosis. We defined the jugement standard of radial pulse diagnosis system and then we confirmed the possibility for realization of automatic radial pulse diagnosis in korean traditional medicine. 30545 T00401030545 ^x Microspheres are expected to be applied to biomedical areas such as solid-phase immunoassays, drug delivery systems, immunomagnetic cell separation. To synthesize microspheres for biomedical application, "two stage shot growth method" was developed. The uniformity ratio of synthesized microspheres was always smaller than 1.05. And the surface charge density (or the number of ionizable functional groups) of the microspheres synthesized by "two stage shot growth method" was 6~13 times higher than that of the microspheres synthesized by conventional seeded batch copolymerization. As a previous step for biomedical application, adsorption experiments of bovine albumin on microspheres were carried out under various conditions. The maximum adsorbed amount was obtained in the neighborhood of pH 4.5. Isoelectric point of bovine albumin is pH 5.0, so experimental result shows that it shifted to acid area. The adsorption isotherm was obtained, the plateau region was always reached at 2.Og/L (bulk concentration of bovine albumin).The effect of the kind and the amount of surface functional group was also examined. 30575 T00401030575 ^x A medical image workstation was developed using multimedia technique. The system based on PC-486DX was designed to acquire medical images produced by medical imaging instruments and related audio information, that is, doctors' reporting results. Input information was processed and analyzed, then the results were presented in the form of graph and animation. All the informations of the system were hierarchically related with the image as the apex. Processing and analysis algorithms were implemented so that the diagnostic accuracy could be improved. The diagnosed information can be transferred for patient diagnosis through LAN(local area network). 30592 T00401030592 ^x In the conventional infrared imaging system, complex infrared lens systems are usually used for directing collimated narrow infrared beams into the high speed 2-dimensional optic scanner. In this paper, a simple reflective infrared optic system with a 2-dimensional optic scanner is proposed for the realization of medical infrared thermography system. It has been experimentally proven that the intfrared thermography system composed of the proposed optic system has the temperature resolution of 0.1˚c under the spatial resolution of lmrad, the image matrix size of 256 X 240, and tile imaging time of 4 seconds. 30593 T00401030593 ^x In this paper, MIIS (Medical Image Information System) has been designed and implemented using INGRES RDBMS, which is based on a client/server architecture. The implemented system allows users to register and retrieve patient information, medical images and diagnostic reports. It also provides the function to display these information on workstation windows simultaneously by using the designed menu-driven graphic user interface. The medical image compression/decompression techniques are implemented and integrated into the medical image database system for the efficient data storage and the fast access through the network. 30594 T00401030594 ^x In this paper, computerized BEAM was implemented for the space domain analysis of EEG. Trans-formation from temporal summation to two-dimensional mappings is formed by 4 nearest point inter-polaton method. Methods of representation of BEAM are two. One is dot density method which classify brain electrical potential 9 levels by dot density of gray levels and the other is colour method which classify brain electrical 12 levels by red-green colours. In this BEAM, instantaneous change and average energy distribution over any arbitrary time interval of brain electrical activity could be observed and analyzed easily. In the frequency domain, the distribution of energy spectrum of a special band can easily be distinguished normality and abnormality. 30608 T00401030608 ^x Laboratory information system (LIS) is a key tool to manage laboratory data in clinical pathology. Our department has developed an information system for routine hematology using down-sized computer system. We have used an IBM 486 compatible PC with 16MB main memory, 210 MB hard disk drive, 9 RS-232C port and 24 pin dot printer. The operating system and database management system were SCO UNIX and SCO foxbase, respectively. For program development, we used Xbase language provided by SCO foxbase. The C language was used for interface purpose. To make the system use friendly, pull-down menu was used. The system connected to our hospital information system via application program interface (API), so the information related to patient and request details is automatically transmitted to our computer. Our system interfaced with fwd complete blood count analyzers(Sysmex NE-8000 and Coulter STKS) for unidirectional data tansmission from analyzer to computer. The authors suggests that this system based on down-sized computer could provide a progressive approach to total LIS based on local area network, and the implemented system could serve as a model for other hospital's LIS for routine hematology. 30609 T00401030609 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed a composite that is consisted of calcium phosphate and collagen. To use as the structural matrix of the composite, collagen was purified from human umbilical cord. The obtained collagen was treated by pepsin to remove telopeptides, and finally, the immune-free atelocollagen was produced: The cross linked atelocollagen was highly resistant to the collagenase induced collagenolysis. The cross linked collagen demonstrated an improved tensile strength. 30618 T00401030618 ^x This paper is a study on the design of adptive filter for QRS complex detection. We propose a simple adaptive algorithm to increase capability of noise cancelation in QRS complex detection with two stage adaptive filter. At the first stage, background noise is removed and at the next stage, only spectrum of QRS complex components is passed. Two adaptive filters can afford to keep track of the changes of both noise and QRS complex. Each adaptive filter consists of prediction error filter and FIR filter The impulse response of FIR filter uses coefficients of prediction error filter. The detection rates for 105 and 108 of MIT/BIH data base were 99.3% and 97.4% respectively. 30619 T00401030619 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed and produced a composite that is consisted of calcium phosphate and collagen. Human umbilical cord origin pepsin treated type I atelocollagen was used as the structural matrix, by which sintered or non-sintered carbonate apatite was encapsulated to form an inorganic-organic composite. With cross linking atelocollagen by UV ray irradiation, the resistance to both compressive and tensile strength was increased. Collagen degradation by the collagenase induced collagenolysis was also decreased. 30620 T00401030620 ^x We have developed a monoleaflet polymer valve as an inexpensive and viable alternative, especially for short-term use in the ventricular assist device or total artificial heart. The frame and leaflet of the polymer valve were made from polyurethane, To evaluate the hemodynamic performance of the polymer valve a comparative study of flow dynamics past a polymer valve and a St. Jude Medical prosthetic valve under physiological pulsatile flow conditions in vitro was made. Comparisons between the valves were made on the transvalvular pressure drop, regurgitation volume and maximum valve opening area. The polymer valve showed smaller regurgitation volume and transvalvular pressure drop compared to the mechanical valve at higher heart rate. The results showed that the functional characteristics of the polymer valve compared favorably with those of the mechanical valve at higher heart rate. 30621 T00401030621 ^x Explosive evaporative removal process of biological tissue by absorption of a CW laser has been simulated by using gelatin and a multimode Nd:YAG laser. Because the point of maximun temperature of laser-irradiated gelatin exists below the surface due to surface cooling, evaporation at the boiling temperature is made explosively from below the surface. The important parameters of this process are the conduction loss to laser power absorption (defined as the conduction-to-laser power parameter, Nk), the convection heat transfer at the surface to conduction loss (defined as Bi), dimensionless extinction coefficient (defined as Br.), and dimensionless irradiation time (defined as Fo). Dependence of Fo on Nk and Bi has been observed by experiment, and the results have been compared with the numerical results obtained by solving a 2-dimensional conduction equation. Fo and explosion depth (from the surface to the point of maximun temperature) are increased when Nk and Bi are increased.To find out the minimum laser power for explosive evaporative removal process, steady state analysis has been also made. The limit of Nk to induce evaporative removal, which is proportional to the inverse of the laser power, has been obtained. 30622 T00401030622 ^x N1 and N2 gross neural action potentials were measured from the round window of the guinea pig cochlea at the onset of the acoustic stimuli. N1-N2 audiograms were made by means of regulating stimulant intensities in order to produce constant N1-N2 potentials as criteria for different input tone pip frequencies. The lowest threshold was measured with an input tone pip I5 dB SPL in intensity and 12 KHz in frequency when the animal was in normal physiological condition. The procedure of experimental measurements is explained in detail. This experimental approach is very useful for the investigation of the Cochlear function. Both noN1inear and active functions of the Cochlea can be monitored by N1-N2 audiograms. 30623 T00401030623 ^x In electrical impedance tomography(EIT), we use boundary current and voltage measurements toprovide the information about the cross-sectional distribution of electrical impedance or resistivity. One of the major problems in EIT has been the inaccessibility of internal voltage or current data in finding the internal impedance values. We propose a new image reconstruction method using internal current density data measured by NMR. We obtained a two-dimensional current density distribution within a phantom by processing the real and imaginary MR images from a 4.77 NMR machine. We implemented a resistivity mage reconstruction algorithm using the finite element method and sensitivity matrix. We presented computer simulation results of the mage reconstruction algorithm and furture direction of the research. 30624 T00401030624 ^x A new method of digital image analysis technique for discrimination of cancer cell was presented in this paper. The object image was the Thyroid eland cells image that was diagnosed as normal and abnormal (two types of abnormal: follicular neoplastic cell, and papillary neoplastic cell), respectively. By using the proposed region segmentation algorithm, the cells were segmented into nucleus. The 16 feature parameters were used to calculate the features of each nucleus. A9 a consequence of using dominant feature parameters method proposed in this paper, discrimination rate of 91.11% was obtained for Thyroid Gland cells. 30625 T00401030625 ^x An electrical stimulator was designed to induce locomotion for paraplegic patients caused by central nervous system injury. Optimal stimulus parameters, which can minimize muscle fatigue and can achieve effective muscle contraction were determined in slow and fast muscles in Sprague-Dawley rats. Stimulus patterns of our stimulator were designed to simulate electromyographic activity monitored during locomotion of normal subjects. Muscle types of the lower extremity were classified according to their mechanical property of contraction, which are slow muscle (msoleus m.) and fast muscle (medial gastrocneminus m., rectus femoris m., vastus lateralis m.). Optimal parameters of electrical stimulation for slow muscles were 20 Hz, 0.2 ms square pulse. For fast muscle, 40 Hz, 0.3 ms square pulse was optimal to produce repeated contraction. Higher stimulus intensity was required when synergistic muscles were stimulated simultaneously than when they were stimulated individually. Electrical stimulation for each muscle was designed to generate bipedal locomotion, so that individual muscles alternate contraction and relaxation to simulate stance and swing phases. Portable electrical stimulator with 16 channels built in microprocessor was constructed and applied to paraplegic patients due to lumbar cord injury. The electrical stimulator restored partially gait function in paraplegic patients. 30626 T00401030626 ^x Two-Dimensional modelling of the Cochlear biomechanics is presented in this paper. The Laplace partial differential equation which represents the fluid mechanics of the Cochlea has been transformed into two-dimensional electrical transmission line. The procedure of this transformation is explained in detail. The comparison between one and two dimensional models is also presented. This electrical modelling of the basilar membrane (BM) is clearly useful for the next approach to the further. Development of active elements which are essential in the producing of the sharp tuning of the BM. This paper shows that two-dimension model is qualitatively better than one-dimensional model both in amplitude and phase responses of the BM displacement. The present model is only for frequency response. However because the model is electrical, the two-dimensional transmission line model can be extended to time response without any difficult. 30627 T00401030627 ^x A method has been proposed for the fully automatic detection of left ventricular endocardial boundary in 2D short axis echocardiogram using geometric model. The procedure has the following three distinct stages. First, the initial center is estimated by the initial center estimation algorithm which is applied to decimated image. Second, the center estimation algorithm is applied to original image and then best-fit elliptic model estimation is processed. Third, best-fit boundary is detected by the cost function which is based on the best-fit elliptic model. The proposed method shows effective result without manual intervention by a human operator. 30628 T00401030628 ^x The intelligent trajectory control method that controls moving direction and average velocity for a prosthetic arm is proposed by pattern recognition and force estimations using EMG signals. Also, we propose the real time trajectory planning method which generates continuous accelleration paths using 3 stage linear filters to minimize the impact to human body induced by arm motions and to reduce the muscle fatigue. We use combination of MLP and fuzzy filter for pattern recognition to estimate the direction of a muscle and Hogan's method for the force estimation. EMG signals are acquired by using a amputation simulator and 2 dimensional joystick motion. The simulation results of proposed prosthetic arm control system using the EMf signals show that the arm is effectively followed the desired trajectory depended on estimated force and direction of muscle movements. 30638 T00401030638 ^x A new neural network architecture for the recognition of patterns from images is proposed, which is partially based on the results of physiological studies. The proposed network is composed of multi-layers and the nerve cells in each layer are connected by spatial filters which approximate receptive fields in optic nerve fields. In the proposed method, patterns recognition for complicated images is carried out using global features as well as local features such as lines and end-points. A new generating method of matched filers representing global features is proposed in this network. 30659 T00401030659 ^x An implementation scheme of the magnetic nerve stimulator using a switching mode power supply is proposed. By using a switching mode power supply rather than a conventional linear power supply for charging high voltage capacitors, the weight and size of the magnetic nerve stimulator can be considerably reduced. Maximum output voltage of the developed magnetic nerve stimulator using the switching mode power supply is 3, 000 volts and switching time is about 100 msec. Experimental results or human nerve stimulations using the developed stimulator are presented. 30768 T00401030768 ^x In this paper, we describe the design methodology and specifications of the developed module-based bedside monitors for patient monitoring. The bedside monitor consists of a main unit and module cases with various parameter modules. The main unit includes a 12.1" TFT color LCD, a main CPU board, and peripherals such as a module controller, Ethernet LAN card, video card, rotate/push button controller, etc. The main unit can connect at maximum three module cases each of which can accommodate up to 7 parameter modules. They include the modules for electrocardiograph, respiration, invasive blood pressure, noninvasive blood pressure, temperature, and SpO2 with Plethysmograph.SpO2 with Plethysmograph.

• 한국우주과학회:학술대회논문집(한국우주과학회보)
• /
• 한국우주과학회 1993년도 한국우주과학회보 제2권2호
• /
• pp.17-17
• /
• 1993

The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70${\pm}$1.32mmHg/min)compared to CF dialyzers(4.32${\pm}$0.55mmHg/min)(p<0.05). However, there was no observable difference in the UFR between the two dialyzers. Neither APD nor UFR showed any significant increase with an increasing number of reuses for up to more than 20reuses. A substantial number of failures observed in APD(larger than 20mmHe/min)on the reused dialyzers(2 out of 40 CP and S out 26 C-DAK) were attributed to the Possible damage on the fibers. The CF 15-11 HFDs which failed APD test did not show changes in the UFR compared to normal dialyzers indicating that APD is a more sensitive test than UFR test to evaluate the integrity of the fibers. 30527 T00401030527 ^x For quantitative measurement of reflected light from a clinical diagnostic strip, a prototype old reflectance photometer was designed. The strip loader and cassette were made to obtain more accurate reflectance parameters. The strip was illuminated at 45˚c through optical fiber and the intensity of reflected light was determined at rectanguLat angle using a photodiode. The kubelka-munk coefficient and reflection optical density were determined ar four different wavelengths(500,550,570 and 610nm) for blood glucose strip. For higher concentration than 300mg/41 about glucose, a saturation state of abforbance was observed at 500,550 and 570nm. The correlation between glucose concentration and parameters was the best at 610nm. 30535 T00401030535 ^x Radiation-induced fibrosarcoma tumors were grown on the flanks of C3H mice. The mice were divided into two groups. One group was injected with Photofrin II, intravenously (2.5mg/kg body weight). The other group received no Photofrin II. Mice from both groups were irradialed for approximately 15 minutes at 100,300, or 500 mW/cm2 with the argon (488nm/514.5 nm), dye(628nm) and gold vapor (pulsed 628 nm) laser light. A photosensitizer behaved as an added absorber. Under our experimental conditions, the presence of Photolfrin II increased surface temperature by at least 40% and the temperature rise due to 300 mW/cm2 irradiation exceeded values for hyperthermia. Light and temperature distributions with depth were estimated by a computer model. The model demonstrated the influence of wavelength on the thermal process and proved to be a valuable tool to investigate internal temperature rise. 30536 T00401030536 ^x We investigated the structural geometry of thirty-eight Korean femurs. The purpose of this study is to identify major geometrical differences between Korean femurs 3nd others that we believe belong to Caucasians so that we would be able to get insights into the femoral component design that fits Asians including Koreans. We utilized computerized tomography (CT) images of femurs extracted from cadavers. The CT images were transformed into bitmap data by using a film scanner, and then analyzed by using a commercially available software called Image v.1.0 and a Macintosh IIci computer.The resulting data were compared with already published data. The major results show that the geometry of the Korean femurs is significantly different from that of Caucasians: (1) the anteversion angle and the canal flare index are greater by the amount of approximately 8˚ and 0.5, respectively, (2) the shape of the isthmus cross section is more round, and (3) the distance between the teaser trochanter and the proximal border of the isthmus is shelter by about 15 mm. The results suggested that the femoral component suitable for Asians should be different from the currently-used components designed and manufactured mostly by European or American companies. 30537 T00401030537 ^x It is well known that nonlinear propagation characteristics of the wave in the tissue may give very useful information for the medical diagnoisis. In this paper, a new method to detect nonlinear propagation characteristics of the internal vibration in the tissue for the low frequency mechanical vibration by using bispectral analysis is proposed. In the method, low frequency vibration of f0( = 100Hz) is applied on the surface of the object, and the waveform of the internal vibration x (t) is measured from Doppler frequency modulation of silmultaneously transmitted probing ultrasonic waves. Then, the bispectra of the signal x (t) at the frequencies (f0, f0) and (f0, 2f0) are calculated to estimate the nonlinear propagation characteristics as their magnitude ratio, w here since bispectrum is free from the gaussian additive noise we can get the value with high S/N. Basic experimental system is constructed by using 3.0 MHz probing ultrasonic waves and the several experiments are carried out for some phantoms. Results show the superiority of the proposed method to the conventional method using power spectrum and also its usefulness for the tissue characterization. 30541 T00401030541 ^x This paper describes the implementation of a computerized radial pulse diagnosis by aids of a clinical expert. On this base, we composed of the radial pulse diagnosis system in korean traditional medicine. The system composed of a radial pulse wave detection system and a radial pulse diagnosis system. With a detection system, we detected Inyoung and Cheongu radial pulse wave and processed it. Then, we have got the characteristic parameters of radial pulse wave and also quantified that according to the method of Inyoung-Cheongu Comparison Radial Pulse Diagnosis. We defined the jugement standard of radial pulse diagnosis system and then we confirmed the possibility for realization of automatic radial pulse diagnosis in korean traditional medicine. 30545 T00401030545 ^x Microspheres are expected to be applied to biomedical areas such as solid-phase immunoassays, drug delivery systems, immunomagnetic cell separation. To synthesize microspheres for biomedical application, "two stage shot growth method" was developed. The uniformity ratio of synthesized microspheres was always smaller than 1.05. And the surface charge density (or the number of ionizable functional groups) of the microspheres synthesized by "two stage shot growth method" was 6~13 times higher than that of the microspheres synthesized by conventional seeded batch copolymerization. As a previous step for biomedical application, adsorption experiments of bovine albumin on microspheres were carried out under various conditions. The maximum adsorbed amount was obtained in the neighborhood of pH 4.5. Isoelectric point of bovine albumin is pH 5.0, so experimental result shows that it shifted to acid area. The adsorption isotherm was obtained, the plateau region was always reached at 2.Og/L (bulk concentration of bovine albumin).The effect of the kind and the amount of surface functional group was also examined. 30575 T00401030575 ^x A medical image workstation was developed using multimedia technique. The system based on PC-486DX was designed to acquire medical images produced by medical imaging instruments and related audio information, that is, doctors' reporting results. Input information was processed and analyzed, then the results were presented in the form of graph and animation. All the informations of the system were hierarchically related with the image as the apex. Processing and analysis algorithms were implemented so that the diagnostic accuracy could be improved. The diagnosed information can be transferred for patient diagnosis through LAN(local area network). 30592 T00401030592 ^x In the conventional infrared imaging system, complex infrared lens systems are usually used for directing collimated narrow infrared beams into the high speed 2-dimensional optic scanner. In this paper, a simple reflective infrared optic system with a 2-dimensional optic scanner is proposed for the realization of medical infrared thermography system. It has been experimentally proven that the intfrared thermography system composed of the proposed optic system has the temperature resolution of 0.1˚c under the spatial resolution of lmrad, the image matrix size of 256 X 240, and tile imaging time of 4 seconds. 30593 T00401030593 ^x In this paper, MIIS (Medical Image Information System) has been designed and implemented using INGRES RDBMS, which is based on a client/server architecture. The implemented system allows users to register and retrieve patient information, medical images and diagnostic reports. It also provides the function to display these information on workstation windows simultaneously by using the designed menu-driven graphic user interface. The medical image compression/decompression techniques are implemented and integrated into the medical image database system for the efficient data storage and the fast access through the network. 30594 T00401030594 ^x In this paper, computerized BEAM was implemented for the space domain analysis of EEG. Trans-formation from temporal summation to two-dimensional mappings is formed by 4 nearest point inter-polaton method. Methods of representation of BEAM are two. One is dot density method which classify brain electrical potential 9 levels by dot density of gray levels and the other is colour method which classify brain electrical 12 levels by red-green colours. In this BEAM, instantaneous change and average energy distribution over any arbitrary time interval of brain electrical activity could be observed and analyzed easily. In the frequency domain, the distribution of energy spectrum of a special band can easily be distinguished normality and abnormality. 30608 T00401030608 ^x Laboratory information system (LIS) is a key tool to manage laboratory data in clinical pathology. Our department has developed an information system for routine hematology using down-sized computer system. We have used an IBM 486 compatible PC with 16MB main memory, 210 MB hard disk drive, 9 RS-232C port and 24 pin dot printer. The operating system and database management system were SCO UNIX and SCO foxbase, respectively. For program development, we used Xbase language provided by SCO foxbase. The C language was used for interface purpose. To make the system use friendly, pull-down menu was used. The system connected to our hospital information system via application program interface (API), so the information related to patient and request details is automatically transmitted to our computer. Our system interfaced with fwd complete blood count analyzers(Sysmex NE-8000 and Coulter STKS) for unidirectional data tansmission from analyzer to computer. The authors suggests that this system based on down-sized computer could provide a progressive approach to total LIS based on local area network, and the implemented system could serve as a model for other hospital's LIS for routine hematology. 30609 T00401030609 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed a composite that is consisted of calcium phosphate and collagen. To use as the structural matrix of the composite, collagen was purified from human umbilical cord. The obtained collagen was treated by pepsin to remove telopeptides, and finally, the immune-free atelocollagen was produced: The cross linked atelocollagen was highly resistant to the collagenase induced collagenolysis. The cross linked collagen demonstrated an improved tensile strength. 30618 T00401030618 ^x This paper is a study on the design of adptive filter for QRS complex detection. We propose a simple adaptive algorithm to increase capability of noise cancelation in QRS complex detection with two stage adaptive filter. At the first stage, background noise is removed and at the next stage, only spectrum of QRS complex components is passed. Two adaptive filters can afford to keep track of the changes of both noise and QRS complex. Each adaptive filter consists of prediction error filter and FIR filter The impulse response of FIR filter uses coefficients of prediction error filter. The detection rates for 105 and 108 of MIT/BIH data base were 99.3% and 97.4% respectively. 30619 T00401030619 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed and produced a composite that is consisted of calcium phosphate and collagen. Human umbilical cord origin pepsin treated type I atelocollagen was used as the structural matrix, by which sintered or non-sintered carbonate apatite was encapsulated to form an inorganic-organic composite. With cross linking atelocollagen by UV ray irradiation, the resistance to both compressive and tensile strength was increased. Collagen degradation by the collagenase induced collagenolysis was also decreased. 30620 T00401030620 ^x We have developed a monoleaflet polymer valve as an inexpensive and viable alternative, especially for short-term use in the ventricular assist device or total artificial heart. The frame and leaflet of the polymer valve were made from polyurethane, To evaluate the hemodynamic performance of the polymer valve a comparative study of flow dynamics past a polymer valve and a St. Jude Medical prosthetic valve under physiological pulsatile flow conditions in vitro was made. Comparisons between the valves were made on the transvalvular pressure drop, regurgitation volume and maximum valve opening area. The polymer valve showed smaller regurgitation volume and transvalvular pressure drop compared to the mechanical valve at higher heart rate. The results showed that the functional characteristics of the polymer valve compared favorably with those of the mechanical valve at higher heart rate. 30621 T00401030621 ^x Explosive evaporative removal process of biological tissue by absorption of a CW laser has been simulated by using gelatin and a multimode Nd:YAG laser. Because the point of maximun temperature of laser-irradiated gelatin exists below the surface due to surface cooling, evaporation at the boiling temperature is made explosively from below the surface. The important parameters of this process are the conduction loss to laser power absorption (defined as the conduction-to-laser power parameter, Nk), the convection heat transfer at the surface to conduction loss (defined as Bi), dimensionless extinction coefficient (defined as Br.), and dimensionless irradiation time (defined as Fo). Dependence of Fo on Nk and Bi has been observed by experiment, and the results have been compared with the numerical results obtained by solving a 2-dimensional conduction equation. Fo and explosion depth (from the surface to the point of maximun temperature) are increased when Nk and Bi are increased.To find out the minimum laser power for explosive evaporative removal process, steady state analysis has been also made. The limit of Nk to induce evaporative removal, which is proportional to the inverse of the laser power, has been obtained. 30622 T00401030622 ^x N1 and N2 gross neural action potentials were measured from the round window of the guinea pig cochlea at the onset of the acoustic stimuli. N1-N2 audiograms were made by means of regulating stimulant intensities in order to produce constant N1-N2 potentials as criteria for different input tone pip frequencies. The lowest threshold was measured with an input tone pip I5 dB SPL in intensity and 12 KHz in frequency when the animal was in normal physiological condition. The procedure of experimental measurements is explained in detail. This experimental approach is very useful for the investigation of the Cochlear function. Both noN1inear and active functions of the Cochlea can be monitored by N1-N2 audiograms. 30623 T00401030623 ^x In electrical impedance tomography(EIT), we use boundary current and voltage measurements toprovide the information about the cross-sectional distribution of electrical impedance or resistivity. One of the major problems in EIT has been the inaccessibility of internal voltage or current data in finding the internal impedance values. We propose a new image reconstruction method using internal current density data measured by NMR. We obtained a two-dimensional current density distribution within a phantom by processing the real and imaginary MR images from a 4.77 NMR machine. We implemented a resistivity mage reconstruction algorithm using the finite element method and sensitivity matrix. We presented computer simulation results of the mage reconstruction algorithm and furture direction of the research. 30624 T00401030624 ^x A new method of digital image analysis technique for discrimination of cancer cell was presented in this paper. The object image was the Thyroid eland cells image that was diagnosed as normal and abnormal (two types of abnormal: follicular neoplastic cell, and papillary neoplastic cell), respectively. By using the proposed region segmentation algorithm, the cells were segmented into nucleus. The 16 feature parameters were used to calculate the features of each nucleus. A9 a consequence of using dominant feature parameters method proposed in this paper, discrimination rate of 91.11% was obtained for Thyroid Gland cells. 30625 T00401030625 ^x An electrical stimulator was designed to induce locomotion for paraplegic patients caused by central nervous system injury. Optimal stimulus parameters, which can minimize muscle fatigue and can achieve effective muscle contraction were determined in slow and fast muscles in Sprague-Dawley rats. Stimulus patterns of our stimulator were designed to simulate electromyographic activity monitored during locomotion of normal subjects. Muscle types of the lower extremity were classified according to their mechanical property of contraction, which are slow muscle (msoleus m.) and fast muscle (medial gastrocneminus m., rectus femoris m., vastus lateralis m.). Optimal parameters of electrical stimulation for slow muscles were 20 Hz, 0.2 ms square pulse. For fast muscle, 40 Hz, 0.3 ms square pulse was optimal to produce repeated contraction. Higher stimulus intensity was required when synergistic muscles were stimulated simultaneously than when they were stimulated individually. Electrical stimulation for each muscle was designed to generate bipedal locomotion, so that individual muscles alternate contraction and relaxation to simulate stance and swing phases. Portable electrical stimulator with 16 channels built in microprocessor was constructed and applied to paraplegic patients due to lumbar cord injury. The electrical stimulator restored partially gait function in paraplegic patients. 30626 T00401030626 ^x Two-Dimensional modelling of the Cochlear biomechanics is presented in this paper. The Laplace partial differential equation which represents the fluid mechanics of the Cochlea has been transformed into two-dimensional electrical transmission line. The procedure of this transformation is explained in detail. The comparison between one and two dimensional models is also presented. This electrical modelling of the basilar membrane (BM) is clearly useful for the next approach to the further. Development of active elements which are essential in the producing of the sharp tuning of the BM. This paper shows that two-dimension model is qualitatively better than one-dimensional model both in amplitude and phase responses of the BM displacement. The present model is only for frequency response. However because the model is electrical, the two-dimensional transmission line model can be extended to time response without any difficult. 30627 T00401030627 ^x A method has been proposed for the fully automatic detection of left ventricular endocardial boundary in 2D short axis echocardiogram using geometric model. The procedure has the following three distinct stages. First, the initial center is estimated by the initial center estimation algorithm which is applied to decimated image. Second, the center estimation algorithm is applied to original image and then best-fit elliptic model estimation is processed. Third, best-fit boundary is detected by the cost function which is based on the best-fit elliptic model. The proposed method shows effective result without manual intervention by a human operator. 30628 T00401030628 ^x The intelligent trajectory control method that controls moving direction and average velocity for a prosthetic arm is proposed by pattern recognition and force estimations using EMG signals. Also, we propose the real time trajectory planning method which generates continuous accelleration paths using 3 stage linear filters to minimize the impact to human body induced by arm motions and to reduce the muscle fatigue. We use combination of MLP and fuzzy filter for pattern recognition to estimate the direction of a muscle and Hogan's method for the force estimation. EMG signals are acquired by using a amputation simulator and 2 dimensional joystick motion. The simulation results of proposed prosthetic arm control system using the EMf signals show that the arm is effectively followed the desired trajectory depended on estimated force and direction of muscle movements. 30638 T00401030638 ^x A new neural network architecture for the recognition of patterns from images is proposed, which is partially based on the results of physiological studies. The proposed network is composed of multi-layers and the nerve cells in each layer are connected by spatial filters which approximate receptive fields in optic nerve fields. In the proposed method, patterns recognition for complicated images is carried out using global features as well as local features such as lines and end-points. A new generating method of matched filers representing global features is proposed in this network. 30659 T00401030659 ^x An implementation scheme of the magnetic nerve stimulator using a switching mode power supply is proposed. By using a switching mode power supply rather than a conventional linear power supply for charging high voltage capacitors, the weight and size of the magnetic nerve stimulator can be considerably reduced. Maximum output voltage of the developed magnetic nerve stimulator using the switching mode power supply is 3,000 volts and switching time is about 100 msec. Experimental results or human nerve stimulations using the developed stimulator are presented. 30768 T00401030768 ^x In this paper, we describe the design methodology and specifications of the developed module-based bedside monitors for patient monitoring. The bedside monitor consists of a main unit and module cases with various parameter modules. The main unit includes a 12.1" TFT color LCD, a main CPU board, and peripherals such as a module controller, Ethernet LAN card, video card, rotate/push button controller, etc. The main unit can connect at maximum three module cases each of which can accommodate up to 7 parameter modules. They include the modules for electrocardiograph, respiration, invasive blood pressure, noninvasive blood pressure, temperature, and SpO2 with Plethysmograph.