• 소성∙가공
• /
• 제9권2호
• /
• pp.159-164
• /
• 2000

In this paper, a computer simulation technique for the forging process having a floating die is presented. The penalty rigid-plastic finite element method is employed together with an iteratively force-balancing method, in which the convergence is achieved when the floating die part is in force equilibrium within the user-specified tolerance. The force balance is controled by adjusting the velocity of the floating die in an automatic manner. An application example of a three-stage cold forging process is given.

• 대한조선학회논문집
• /
• 제54권6호
• /
• pp.476-484
• /
• 2017

The purpose of this paper is to verify the structural integrity of a region with numerous penetration-holes in offshore structures such as semi-submersible rig and FPSO. In order to effectively check the yielding and buckling strength of plate members with penetration-holes, a screening analysis program was developed with the FE analysis tool to generate fine meshed model using the theoretical and analysis methods. When a hole is appeared in the plate structure members, the flow of stress is altered such that concentrations of stress form near the hole. Stress concentrations are of concern during both preliminary and detail design and need to be addressed from the perspectives of strength. To configure the geometrical shape, very fine meshed FE analysis is needed as the most accurate method. However, this method is practically impossible to apply for the strength verifications for all perforated plates. In this paper, screening analysis method was introduced to reduce analysis tasks prior to detailed FE analysis. This method is applied to not only the peak stress calculation combined stress concentration factor with nominal stress but also nominal equivalent stress calculation considering cutout effects. The areas investigated by very fine meshed analysis were to be chosen through screening analysis without any reinforcements for penetration-holes. If screening analysis results did not satisfy the acceptance criteria, direct FE analysis method as the 2nd step approach were applied with one of the coarse meshed model considering hole or with the very fine meshed model considering the hole shape and size. In order to effectively perform the local fine meshed analysis, automatic model generating program was developed based on the MSC/PATRAN which is pre-post FE analysis program. Buckling strength was also evaluated by Common Structure Rule (CSR) adopted by IACS as the stress obtained from very fine meshed FE analysis. Due to development of the screening analysis program and automatic FE modeling program, it was able to reduce the design periods and structural analysis costs.

• 대한의용생체공학회:의공학회지
• /
• 제9권1호
• /
• pp.93-100
• /
• 1988

The Auto Regressive Parameter Estimation and Pattern Classification of EKG Signal for Automatic Diagnosis. This paper presents the results from pattern discriminant analysis of an AR (auto regressive) model parameter group, which represents the HRV (heart rate variability) that is being considered as time series data. HRV data was extracted using the correct R-point of the EKG wave that was A/D converted from the I/O port both by hardware and software functions. Data number (N) and optimal (P), which were used for analysis, were determined by using Burg's maximum entropy method and Akaike's Information Criteria test. The representative values were extracted from the distribution of the results. In turn, these values were used as the index for determining the range o( pattern discriminant analysis. By carrying out pattern discriminant analysis, the performance of clustering was checked, creating the text pattern, where the clustering was optimum. The analysis results showed first that the HRV data were considered sufficient to ensure the stationarity of the data; next, that the patern discrimimant analysis was able to discriminate even though the optimal order of each syndrome was dissimilar.

• 한국결정학회지
• /
• 제4권1호
• /
• pp.49-51
• /
• 1993

The knowledge on the number of necessary and collectable reflections for the crystal structure analysis is greatly helpful in choosing the conditions for X-ray intensity data collection using automatic four circle diffractometer. In this paper, we represent a method to calculate the total unmber of collectable intensity date in an asymmetric unit.

• 한국대기환경학회:학술대회논문집
• /
• 한국대기환경학회 2004년도 추계학술대회 논문집
• /
• pp.61-63
• /
• 2004

• 한국생산제조학회지
• /
• 제8권2호
• /
• pp.27-34
• /
• 1999

The growth-strain method was used for shape optimization, which carries out the optimization by distributing uniformly the distributed parameter such as von Mises stress and shear strain energy density. Shape optimization is carried out by iteration of stress analysis and growth strain analysis. In this study, the effect of growth ratio in the method was investigated and then the range of the adequate value of the growth ratio was determined. Also the growth-strain method was improved by applying the linear PID control theory in order to control volume required by a designer. Finally, an automatic shape optimization system was built up by the improved growth-strain method with a commercial software using finite element method. The effectiveness and practicability of the developed shape optimization system was verified by some examples.

• 한국조명전기설비학회지:조명전기설비
• /
• 제9권3호
• /
• pp.73-79
• /
• 1995

This paper describes on the design considerations and analysis of moving primary-type linear induction motor for automatic conveyer system. For the study of the designed motor characteristics, calculated values obtained from the analysis using finite element method for various operation conditions are compared with the experimental results. Using the combined interactions of the thrust, the arigap flux density, and the reactive power at standstill as performance criteria, a proper ratio of the pole pitch to the effective airgap is presented for the design criterion.

• ETRI Journal
• /
• 제35권3호
• /
• pp.439-447
• /
• 2013

To increase device memory yield, many manufacturers use incorporated redundancy to replace faulty cells. In this redundancy technology, the implementation of an effective redundancy analysis (RA) algorithm is essential. Various RA algorithms have been developed to repair faults in memory. However, nearly all of these RA algorithms have low analysis speeds. The more densely compacted the memory is, the more testing and repair time is needed. Even if the analysis speed is very high, the RA algorithm would be useless if it did not have a normalized repair rate of 100%. In addition, when the number of added spares is increased in the memory, then the memory space that must be searched with the RA algorithms can exceed the memory space within the automatic test equipment. A very efficient RA algorithm using simple calculations is proposed in this work so as to minimize both the repair time and memory consumption. In addition, the proposed algorithm generates an optimal solution using a tree-based algorithm in each fault group. Our experiment results show that the proposed RA algorithm is very efficient in terms of speed and repair.

• Journal of Biosystems Engineering
• /
• 제33권4호
• /
• pp.276-281
• /
• 2008

A flow injection analysis method (FIA), which analyzes sample conditions after injecting a sample and reagents into a continuous stream, are recognized as the most adequate analyzing method according to the increase of sampling frequency, the decrease of measuring time and the diversity of measuring targets. Specially, the FIA is considered to be used effectively for the control of a fermentation process to produce fermentation food and useful microbial production by activation of a fermentation industry for development of biological materials. In this study, a flow injection analysis sensor unit was developed for on-line monitoring of the fermentation process. The performance was verified by on-line measuring the concentration of glucose of the fermentation process of wine. The glucose concentrations of the samples were measured every 12 hours during the whole fermentation process and compared with those by a HPLC. The concentration relative errors of glucose on the fermentation process of wine showed below 30% within 72 hours and over 50% after the 72 hours. The sensor unit had potential to on-line monitoring of the fermentation process but some problems to overcome for an commercial application.

• 한국통신학회논문지
• /
• 제21권5호
• /
• pp.1208-1220
• /
• 1996

본 논문에서는 IEEE 802.11에서 채택한 매체접근제어 프로토콜인 Stop-and-Wait Automatic Repeat reQust(ARQ)방식을 사용하는 Carrier Sence Multiple Access/Collision Avoidance(CSMA/CA) 프로토콜의 성능을 renewal theory를 사용하여 수학적으로 분석하였으며, 컴퓨터 시뮬레이션을 사용하여 분석의 신뢰성을 검증하였다. CSMA/CA 프로토콜의 처리율을 분석하기 위하여 통신망은 유한 가입자로 구성되며, 슬롯화된 채널을 고려하였고, CSMA/CA프로토콜은 1-persistent CSMA와 p-persistent CSMA프로토콜을 혼합한 프로토콜로 모델링하여 CSMA.CA 프로토콜의 처리율 및 패킷지연을 분석하였다. 분석 결과에 의하면, CSMA/CA 방식은 스테이션의 수, Acknowledgement(ACK) 패킷의 길이 및 Distributed coordination function Inter Frame Space(DIFS)의 길이가 커짐에 따라 처리율이 저하되었으며, 패킷 지연이 증가하였다.