• Journal of Environmental Science International
• /
• v.29 no.10
• /
• pp.1003-1010
• /
• 2020

In this study, the necessity for a village unit Automatic Weather System (AWS) was suggested to obtain correct agricultural weather information by comparing the data of AWS of the weather station with the data of AWS installed in agricultural villages 7 km away. The comparison sites are Hyogyo-ri and Hongseong weather station. The seasonal and monthly averaged and cumulative values of data were calculated and compared. The annual time series and correlation was analyzed to determine the tendency of variation in AWS data. The average values of temperature, relative humidity and wind speed were not much different in comparison with each season. The difference in precipitation was ranged from 13.2 to 91.1 mm. The difference in monthly precipitation ranged from 1.2 to 75.4 mm. The correlation coefficient between temperature, humidity and wind speed was ranged from 0.81 to 0.99 and it of temperature was the highest. The correlation coefficient of precipitation was 0.63 and the lowest among the observed elements. Through this study, precipitation at the weather station and village unit area showed the low correlation and the difference for a quantitative comparison, while the elements excluding precipitation showed the high correlation and the similar annual variation pattern.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.64 no.1
• /
• pp.107-112
• /
• 2015

This paper introduces an evolutionary nonlinear regression based compensation technique for the short-range prediction of wind speed using AWS(Automatic Weather Station) data. Development of an efficient MOS(Model Output Statistics) is necessary to correct systematic errors of the model, but a linear regression based MOS is hard to manage an irregular nature of weather prediction. In order to solve the problem, a nonlinear and symbolic regression method using GP(Genetic Programming) is suggested for a development of MOS wind forecast guidance. Also FCM(Fuzzy C-Means) clustering is adopted to mitigate bias of wind speed data. The purpose of this study is to evaluate the accuracy of the estimation by a GP based nonlinear MOS for 3 days prediction of wind speed in South Korean regions. This method is then compared to the UM model and has shown superior results. Data for 2007-2009, 2011 is used for training, and 2012 is used for testing.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.26 no.3
• /
• pp.182-189
• /
• 2016

For high accuracy of forecast using numerical weather prediction models, we need to get weather observation data that are large and high dense. Korea Meteorological Administration (KMA) mantains Automatic Weather Stations (AWSs) to get weather observation data, but their installation and maintenance costs are high. Mini-AWS is a very compact automatic weather station that can measure and record temperature, humidity, and pressure. In contrast to AWS, costs of Mini-AWS's installation and maintenance are low. It also has a little space restraints for installing. So it is easier than AWS to install mini-AWS on places where we want to get weather observation data. But we cannot use the data observed from Mini-AWSs directly, because it can be affected by surrounding. In this paper, we suggest a correcting method for using pressure data observed from Mini-AWS as weather observation data. We carried out preconditioning process on pressure data from Mini-AWS. Then they were corrected by using machine learning methods with the aim of adjusting to pressure data of the AWS closest to them. Our experimental results showed that corrected pressure data are in regulation and our correcting method using SVR showed very good performance.

• Journal of Industrial Technology
• /
• v.31 no.A
• /
• pp.119-122
• /
• 2011

AWS (Automated Weather Station) wind data was used to predict the annual energy production of Gangwon wind farm having a total capacity of 98 MW in Korea. Two common wind energy prediction programs, WAsP and WindSim were used. Predictions were made for three consecutive years of 2007, 2008 and 2009 and the results were compared with the actual annual energy prediction presented in the CDM (Clean Development Mechanism) monitoring report of the wind farm. The results from both prediction programs were close to the actual energy productions and the errors were within 10%.

• Korean Journal of Remote Sensing
• /
• v.31 no.2
• /
• pp.65-75
• /
• 2015

In this study, the observation environment of surface wind at an automatic weather station (AWS 288) located at Naei-dong, Mirang-si was analyzed using a computational fluid dynamics (CFD) model and geographic information system (GIS). The 16 cases with different inflow directions were considered before and after construction of an apartment complex around the AWS 288. For three inflow directions (south-south-westerly, south-south-easterly, and north-north-westerly), flow characteristics around the AWS 288 were investigated in detail, focusing on the changes in wind speed and direction at the AWS location. There was marked difference in wind speed between before and after construction of the apartment complex in the south-south-westerly case. In the south-south-easterly and north-north-westerly cases which were frequently observed at the AWS 288, the construction of the apartment complex had no marked influence on the observation of surface wind.

• Atmosphere
• /
• v.27 no.1
• /
• pp.67-77
• /
• 2017

In this study, we analyzed the characteristics of flow around the Daeyeon automatic weather station (AWS 942) and established formulas estimating inflow wind speeds at a computational fluid dynamics (CFD) model domain for the area around Pukyong national university using a computational fluid dynamics (CFD) model. Simulated wind directions at the AWS 942 were quite similar to those of inflows, but, simulated wind speeds at the AWS 942 decreased compared to inflow wind speeds except for the northerly case. The decrease in simulated wind speed at the AWS 942 resulted from the buildings around the AWS 942. In most cases, the AWS 942 was included within the wake region behind the buildings. Wind speeds at the inflow boundaries of the CFD model domain were estimated by comparing simulated wind speeds at the AWS 942 and inflow boundaries and systematically increasing inflow wind speeds from $1m\;s^{-1}$ to $17m\;s^{-1}$ with an increment of $2m\;s^{-1}$ at the reference height for 16 inflow directions. For each inflow direction, calculated wind speeds at the AWS 942 were fitted as the third order functions of the inflow wind speed by using the Marquardt-Levenberg least square method. Estimated inflow wind speeds by the established formulas were compared to wind speeds observed at 12 coastal AWSs near the AWS 942. The results showed that the estimated wind speeds fell within the inter quartile range of wind speeds observed at 12 coastal AWSs during the nighttime and were in close proximity to the upper whiskers during the daytime (12~15 h).

• Journal of Environmental Science International
• /
• v.27 no.7
• /
• pp.509-518
• /
• 2018

Weather is the most influential factor for crop cultivation. Weather information for cultivated areas is necessary for growth and production forecasting of agricultural crops. However, there are limitations in the meteorological observations in cultivated areas because weather equipment is not installed. This study tested methods of predicting the daily mean temperature in onion fields using geostatistical models. Three models were considered: inverse distance weight method, generalized additive model, and Bayesian spatial linear model. Data were collected from the AWS (automatic weather system), ASOS (automated synoptic observing system), and an agricultural weather station between 2013 and 2016. To evaluate the prediction performance, data from AWS and ASOS were used as the modeling data, and data from the agricultural weather station were used as the validation data. It was found that the Bayesian spatial linear regression performed better than other models. Consequently, high-resolution maps of the daily mean temperature of Jeonnam were generated using all observed weather information.

• Proceedings of the KSRS Conference
• /
• 2002.10a
• /
• pp.358-360
• /
• 2002

In order to find horizontal and vertical precipitation structure in Korean peninsula, we use ground-based radar, and Automatic Weather Station (AWS) data. Radar data was selected for rain events in the Pusan and Jindo in Korea, during the spring and summer season of 2002. AWS point gauge measurements are analyzed as part of spatial structure of precipitation. TRMM/PR and ground-based radar is used vertical correlation. The results showed, as expected that the correlation decreased rapidly with distance.

• International Journal of Highway Engineering
• /
• v.14 no.4
• /
• pp.141-148
• /
• 2012

PURPOSES : This study demonstrates the need for the collection of road weather information in order to perform efficient snow removal works during the winter season. Snow removal operations are usually dependent upon weather information obtained from the Automatic Weather Station provided by the Korea Meteorological Administration. However, there are some difference between road weather and weather forecasts in their scope. This is because general weather forecasts are focused on macroscopic standpoints rather than microscopic perspectives. METHODS : In this study, the relationship between snow removal works and historical weather forecasts are properly analyzed to prove the importance of road weather information. We collected both weather data and snow removal works during winter season at "A" regional offices in Gangwon areas. RESULTS : Results showed that the validation of weather forecasts for snow removal works were depended on the height difference between AWS location and its neighboring roadway. CONCLUSIONS : Namely, it appears that road weather information should be collected where AWS location and its neighboring roadway have relatively big difference in their heights.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.4 no.1
• /
• pp.57-66
• /
• 2001

This study used four theoretical models, such as two-point linear model, linear regression model, quadratic regression model and cubic regression model which are presented from The Ministry of Science and Technology, for extraction of urban surface temperature from Landsat TM band 6 image. Through correlation and regression analysis between result of four models and AWS(automatic weather station) observation data, this study could verify spatial distribution characteristic of urban surface temperature using GIS spatial analysis method. The result of analysis for surface temperature by landcover showed that the urban and the barren land belonged to the highest surface temperature class. And there was also -0.85 correlation in the result of correlation analysis between surface temperature and NDVI. In this result, the meteorological environmental characteristics wuld be regarded as one of the important factor in urban planning.