• 한국농공학회논문집
• /
• 제56권3호
• /
• pp.31-38
• /
• 2014

Four actual cultivations were prepared and a variety of soybean was cultivated. A H-flume, an automatic water level gauge and an automatic water sampler were installed at the outlet of each plot equipped for the measurement of flow rate and its water quality. The amount of rainfall of the study area in 2013 was measured as 975.6 mm which was much lower than the annual average rainfall of 1,271.8 mm, resulting in less occurrences in rainfall-runoff events. Rainfall-runoff events were occurred three times during the rainfall event of 4~5 July, 23 and 24 August. The characteristics of NPS pollution discharge of the plots and the reduction effect of the selected BMPs were analyzed during these events. The reduction effect of straw mat and soil amendments (Polyacrylamide (PAM) and Gypsum) on runoff ratio ranged between 38.2 and 92.9% (average 71.6%). The NPS pollution load reduced between 27.7 and 95.1% (average 70.0%) by the application of rice straw mat and soil conditioner when compared with that of control plot. Soybean yield (2,133.3 kg/ha) of the straw mat covered plots increased by 14.3% when compared with control (1,866.7 kg/ha). The effect of straw mat on the yield was not economically viable if the material and accompanying labor costs were considered. The data collected and analyzed on different soil textures and crops in this study are expected to be a fundamental reference for the expansion of the results to the application nationwide and the development of NPS pollution management policies.

• 국제학술발표논문집
• /
• The 2th International Conference on Construction Engineering and Project Management
• /
• pp.337-345
• /
• 2007

Nowadays, it is convenient to use 3D modeling tools for general planning before construction. Normally, a 3D model is built with 3D CAD such as 3D Studio Max, Maya, etc. or simply with AutoCAD. All these software packages are effective in building 3D models but difficult to use, because many provided functions and tools require prior knowledge to build both 2D and 3D designs. Moreover, the traditional method of building 3D models is most time-consuming as experienced operators and manual input are required. Therefore, how to minimize the building time of 3D models and provide easy-to-use functions for users who are not familiar with 3D modeling becomes important. In this paper, the VisualLISP programming language is used to create a convenient tool for efficient generation of 3D components for the AutoCAD environment. This tool will be demonstrated with the generation of a 3D sluice, an artificial passage for water fitted with a valve or gate to stop or regulate water flow. With the tool, users only need to enter the parameters of a sluice in the edit box and the 3D model will be automatically generated in a few seconds. By changing parameters in the edit box and pressing the "OK" button, a new 3D sluice model will be generated in a short while.

• 한국수산과학회지
• /
• 제43권6호
• /
• pp.735-739
• /
• 2010

This study investigated a method for monitoring fishes immigrating to upper streams from the sea in relation to water level with elapsed time, and measured fish behavior patterns and swimming speed in a fishing boat gateway using an acoustic camera system. This method was employed due to difficulties, linked to high turbidity, of using only underwater optical systems for monitoring fish migrating to brackish water. Results showed that fish length distribution showed high correlation between haul sampling and an automatic counting algorithm supported by the DIDSON software program. These results will help to maximize the effects of fish run management by increasing understanding of the amount of major fish species migrating in relation to durable water levels.

• Nuclear Engineering and Technology
• /
• 제39권4호
• /
• pp.257-272
• /
• 2007

Supercritical water-cooled reactors (SCWRs) are recognized as a Generation IV reactor concept. The Super LWR is a pressure-vessel type thermal spectrum SCWR with downward-flow water rods and is currently under study at the University of Tokyo. This paper reviews Super LWR safety. The fundamental requirement for the Super LWR, which has a once-through coolant cycle, is the core coolant flow rate rather than the coolant inventory. Key safety characteristics of the Super LWR inhere in the design features and have been identified through a series of safety analyses. Although loss-of-flow is the most important abnormality, fuel rod heat-up is mitigated by the "heat sink" and "water source" effects of the water rods. Response of the reactor power against pressurization events is mild due to a small change in the average coolant density and flow stagnation of the once-through coolant cycle. These mild responses against transients and also reactivity feedbacks provide good inherent safety against anticipated-transient-without-scram (ATWS) events without alternative actions. Initiation of an automatic depressurization system provides effective heat removal from the fuel rods. An "in-vessel accumulator" effect of the reactor vessel top dome enhances the fuel rod cooling. This effect enlarges the safety margin for large LOCA.

• 한국잠사곤충학회지
• /
• 12호
• /
• pp.37-45
• /
• 1970

1969년도 우리나라 제사공장의 공정관리 실태를 조사분석한 결과는 다음과 같다. 1 춘추잠기 공히 최성일을 포함한 5일간(최성일전후 각 2일)의 출하량이 전공판량의 약 80% 내외이고 최성일의 －3일까지 및 ＋3일이후의 출하량은 가각 10% 내외이다. 2. 생견의 운반도로상태는 92% 내외가 비포장도로이고 전공장이 구견량의 40% 내외를 40km이상되는 공판장에서 트럭으로 운반하고 있는 실정이므로 생견수송중의 격동에 의한 견질손상을 최소한으로 감소시킬 수 있는 생견의 새로운 포장방법이 청구되어야 할 것이다. 3. 전공장의 22%가 생사품위의 저하요인이 되고 있는 저온건조고만을 설치하고 있는 실정이드로 이들 공장에 대한 열풍건견기의 설치는 시급하다고 본다. 4. 원료견의 가일조제방법은 50% 내외가 정상(1.2.3.4등견), 정하(5.6등견)로 구분하고 있는바 우리나라의 견질성상으로 볼 때 정상(1.2등견), 정중(3.4 등견) 정하(5.6등견)로 구분하여 조제하는 방향으로 개선시켜야 될 것이다. 5. 선제견비율은 다조조사용이 10% 내외 자동조사용이 15% 내외로서 다조용보다 자동용이 높았으며 대 1인당 1일 선견능력은 약 80~100kg이었다. 6. 자견조건은 원료견의 해서가 불량할수록 자견시간 자견압력 및 자견온도가 높았으며 자동조사용 및 옥사조사용의 원료견은 다조조사용의 원료견보다 약자상태이었다. 7. 자동조사가 다조조사보다 1~2$^{\circ}C$의 저온에서 약 2배의 권취속도로 조사하고 있다. 8. 재조온습도는 실내가 $25^{\circ}C$, 67.2%RH 기내가 32.3$^{\circ}C$ 51.9% RH이었고 권취속도는 233m/min 대 1인당 담당창수는 7.5창이었으며 타래의 형태는 전공장이 배인이었다. 9. 제사용수의 용수원은 약 75%가 지하수이고 정수시설이 미비되어 있는 공장이 약 48%인바 이들 공장에 대한 정수시설의 완비는 시급한 과제이다. 10. 대부분의 공장이 자체검사시설로서 검위형, 무척기 Seriplane 검사시설을 보유하고 있다. 11. 진공삼투기는 전공장의 90%이상이 재조공정에서 약 20% 공장이 자견공정에서 활용하고 있다. 12. 제사공정에서 화학약제를 사용하는 공장은 약 21%에 불과하며 사용하는 약제는 대부분의 공장이 자견과정에서는 Seracol "100"을 재조과정에서는 Seracol "500"이었다. 13. 이상의 조사결과를 종합하여 볼 때 공정관리면에서는 각제사공장간에 큰 차이를 나타내고 있으므로 강습회 등을 통한 각공장간의 기술교류는 우리나라 제사업의 생산성을 제고시키는 한 요인이 될것이다.성을 제고시키는 한 요인이 될것이다.

• 대한안전경영과학회지
• /
• 제22권1호
• /
• pp.33-44
• /
• 2020

This study analyzed how the installation of a pressure gauge in the indoor fire hydrant of an apartment building affected identifying pressurized water in the pipe, making it easier to conduct internal inspection on the fire suppression system, and ensuring reliability of fire suppression. The following are the study's results: First, identifying pressurized water in the indoor firefighting pipe had a positive effect on the installation of a pressure gauge in the indoor fire hydrant. This implies that a higher level of identification of pressurized water in the indoor firefighting pipe had a positive impact on improving the installation and use of a pressure gauge in the indoor fire hydrant. Second, making it easier for the fire safety officer to inspect the fire suppression system had a positive effect on the installation of a pressure gauge in the indoor fire hydrant. This suggests that if it becomes easier for the apartment building's stakeholder to conduct internal inspection or the firefighting facility manager to carry out inspection on the fire suppression system, it would have a positive effect on the installation of a pressure gauge in the indoor fire hydrant. Finally, ensuring reliability in fire suppression had a positive effect on the installation of a pressure gauge in the indoor fire hydrant. This implies that if it becomes easier to identify pressurized water in the indoor firefighting pipe, for the fire safety officer to conduct internal inspection, or for the firefighting facility manager to carry out inspection in accordance with the fire suppression system's internal inspection requirements, it would increase reliability in fire suppression, making it more necessary to install a pressure gauge in the indoor fire hydrant.

• 수산해양기술연구
• /
• 제44권1호
• /
• pp.37-45
• /
• 2008

Assessment and management of fisheries abundance in fresh water like a river or a lake is very important to maintain fisheries itself as well as tourist industry even if their scale is not much large. The species for catch in fresh water are mainly a mandarin fish, a carp, an eel, and others. Because oriental river prawn is a main prey of these species and the change in its abundance is directly related to their abundance change in fresh water, information on the abundance and distribution of the species are necessary. Hydroacoustic survey is known to one of the efficient method among several methodology. Information on acoustic target strength is key parameter to estimate abundance for acoustic survey. In this study, measurements on oriental river prawn, Macrobrachium koreana, were conducted for two high frequencies(200kHz and 420kHz) with tilt angle using automatic rotating system. The results of acoustic target strength obtained from the experiment were compared with those of acoustic scattering model, Distorted Wave Born Approximation(DWBA) model. For 200kHz, the result of acoustic target strength experiments was expressed in terms of the averaged target strength dependence on the body langth(BL, cm) as a following relationship; < $TS_{200kHz}$ > = 45.9log(BL) - 107.4. These results provide basic information for studying acoustic target strength and conducting acoustic survey of oriental river prawn.

• 물과 미래
• /
• 제19권3호
• /
• pp.249-258
• /
• 1986

본 연구는 수공구조물의 계획설계와 물관리 계획시 계획강우량의 결정기준이 되는 우리나라 전역의 최대하강수량 추정을 위한 최대하강수량 빈도계수 산정에 관한 내용이다. PMP 빈도계수 산정에 있어서는 연속기록년 20년의 자기우량기록지 보유지점을 대상으로 하였으며, 지속기간별(10분, 1,2,4,6,12,24시간) 연최대치 강우자료집단을 이용하여 연최대평균강우량에 따른 PMP 빈도계수를 결정할 수 있는 상관도를 작성하였다. 최대하강수량은 최대평균강우량과 빈도계수 및 지속기간 상관도상에서 얻어진 PMP 빈도계수와 통계치를 사용하여 통계학적 방법으로 산정하였으며, 포락선에 의해서 지점 최대하강수량과 지속기간 관계식을 유도하여 산정하였다. 산정된 지점 최대하강수량으로부터 전국에 대한 24시간 최대하강수량 분포도와 PMP·DAD 곡선을 작성하였다. ^ The purpose of this study is to estimate the PMP frequency factor for evaluation of the Probable Maximum Precipitation (PMP) in Korea. The value of PMP is the criterion of the determination of design rainfall in Planning and designing hydraulic structures, and water resources management. To obtain the object, 12 key stations were selected in which have the automatic rain0recording paper of 20 years, and the annual maximum rainfall values were calculated for each 7 durations(10 min., 1,2,4,6,12,24 hr.). The statistics(mean, standard deviation)were estimated, and diagram which shows the relationship between mean annual maximum rainfall($$) and frequency factor for each durations were drawn. PMP was estimated by statistical method using the PMP frequency factor obtained from the diagram and statistics($$, Sn). The PMP-Duration Equation was derived from the envelope curve in order to obtain the PMP for an arbitrary duration. The isohyetal map of 24 hours PMP and PMP. DAD curve for the whole of Korea were drawn in accordance with the point PMP values.

• 농업과학연구
• /
• 제41권3호
• /
• pp.251-258
• /
• 2014

In order to set up the basic environmental control systems which the new concept greenhouses have to equip, greenhouse characteristics, environmental management and control systems in domestic glasshouses and plastic houses were investigated and analyzed comparatively. Survey results on the width, length, eaves height, and the number of spans etc. showed that glasshouses were bigger than plastic houses significantly. New concept greenhouses claim to be plastic houses, but it will be reasonable to follow the specifications of the glasshouse. Specifications to be applied to new concept greenhouses were proposed as follows; hot water heating systems, aluminum screens as the thermal curtain, evaporative cooling systems, roof vents on the ridge, circulation fans, $CO_2$ enrichment, hydroponic systems, and automatic irrigation control systems. Environmental measurement systems for the indoor and outdoor temperature, humidity, light, wind speed and indoor $CO_2$ concentration have to be fully equipped. The automatic control system has to be as a complex environmental control system, not a single item control system. Also, for stable dissemination, domestically producing complete greenhouse control system should be made as soon as possible.

• 한국환경보건학회지
• /
• 제42권4호
• /
• pp.280-292
• /
• 2016

Objectives: The objective of this study was to build COD regression models for the Han River and evaluate water quality. Methods: Water quality data sets for the dry season (as of January) during a four-year period (2012-2015) were collected from the database of the Han River automatic water quality monitoring stations. Statistical techniques, including combined genetic algorithm-multiple linear regression (GA-MLR) were used to build five-descriptor COD models. Multivariate statistical techniques such as principal component analysis (PCA) and cluster analysis (CA) are useful tools for extracting meaningful information. Results: The $r^2$ of the best COD models provided significant high values (> 0.8) between 2012 and 2015. Total organic carbon (TOC) was a surrogate indicator for COD (as COD/TOC) with high reliability ($r^2=0.63$ in 2012, $r^2=0.75$ for 2013, $r^2=0.79$ for 2014 and $r^2=0.85$ for 2015). The ratios of COD/TOC were calculated as 2.08 in 2012, 1.79 in 2013, 1.52 and 1.45 in 2015, indicating that biodegradability in the water body of the Han River was being sustained, thereby further improving water quality. The BOD/COD ratio supported these findings. The cluster analysis revealed higher annual levels of microorganisms and phosphorous at stations along the Hangang-Seoul and Hantangang areas. Nevertheless, the overall water quality over the last four years showed an observable trend toward continuous improvement. These findings also suggest that non-point pollution control strategies should consider the influence of upstreams and downstreams to protect water quality in the Han River. Conclusion: This data analysis procedure provided an efficient and comprehensive tool to interpret complex water quality data matrices. Results from a trend analysis provided much important information about sources and parameters for Han River water quality management.